1. Giriş
Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Güvenlik Talimatları
- Elektriksel Güvenlik: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Açık Hava Kullanımı: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
- Ampul Tipi: Use only R7s halogen bulbs with a maximum wattag150W'lık e değeri. Maksimum watt değerini aşıyor.tage can cause overheating and damage to the fixture or create a fire hazard.
- İşleme: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
- Montaj: Montaj yüzeyinin yapısal olarak sağlam olduğundan ve armatürün ağırlığını taşıyabileceğinden emin olun.
3. Paket İçeriği
Lütfen tüm parçaların eksiksiz ve hasarsız olduğundan emin olun:
- Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
- Montaj Donanımı (vidalar, dübeller)
- Kullanım Kılavuzu (bu belge)
Note: R7s bulb is typically not included and must be purchased separately.
4. Kurulum ve Kurulum
Başlamadan önce: Kurulum alanına gelen elektrik beslemesinin ana devre kesiciden kapatıldığından emin olun.
- Montaj Yüzeyini Hazırlayın: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
- Braketi Monte Edin: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
- Kablolama: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
- Ampulü takın: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
- Armatürün takılması: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
- Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.

Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.

Şekil 4.2: Yakın çekim view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.
5. Kullanım Talimatları
Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:
- Hareket Algılama: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
- Işık Süresi: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
- Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.
6. Bakım
- Temizlik: Armatürü temizlemek için elektriğin kapalı olduğundan emin olun. Yumuşak bir bezle silin.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or sensor.
- Ampul Değişimi: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
- Denetleme: Periyodik olarak armatürü hasar, gevşek bağlantı veya aşınma belirtileri açısından kontrol edin. Herhangi bir sorun tespit edilirse, elektriği kesin ve yetkili bir elektrikçiye danışın.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Işık açılmıyor. | No power supply. Blown bulb. Faulty wiring. Ambient light too high. | Check circuit breaker. Replace bulb. Verify wiring connections (consult electrician). Adjust LUX setting on sensor. |
| Işık sürekli açık kalır. | Continuous motion detected. Sensor faulty. Wiring error. | Adjust sensor angle/sensitivity. Check for obstructions. Consult electrician. |
| Light turns on randomly. | Sensor too sensitive. Environmental factors (wind, animals). | Reduce sensor sensitivity. Re-position sensor to avoid unwanted triggers. |
| Işık titriyor. | Loose bulb. Incorrect bulb type. Power fluctuations. | Ensure bulb is seated correctly. Verify R7s 150W bulb. Consult electrician for power issues. |
8. Özellikler
| Özellik | Detay |
|---|---|
| Marka | Muhteşem |
| Model Numarası | 96162/06 |
| Ürün Boyutları (U x G x Y) | 14x21x22 cm |
| Ürün Ağırlığı | 521 gram |
| IP Derecelendirmesi | IP44 |
| Stil | Modern |
| Renk | Siyah |
| Malzeme | Metal, Cam |
| Ampul Sayısı | 1 |
| Cilttage | 230 Volt |
| Belirli Kullanımlar | Sadece dış mekanda kullanılabilir |
| Özel Özellikler | Adjustable (sensor/light head) |
| Kapak Tipi | R7s |
| Maksimum Vattage | 150W |
| Güç Kaynağı | Electrical Cable (Wired) |
| Kurulum Türü | Duvara Montaj |
| Enerji Etiketi | A+ to E (for compatible bulbs) |

Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.
9. Garanti ve Destek
Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.





