1. Giriş
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Viqua 650652 H PLUS Commercial UV System. This system is designed for commercial applications requiring high flow water disinfection, such as restaurants, large office buildings, hotels, and schools. It utilizes ultraviolet (UV) light to disinfect water without the use of chemicals, ensuring safe water for various uses.
2. Güvenlik Bilgileri
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the system. Keep this manual for future reference.
- Elektrik Tehlikesi: Always disconnect power before servicing the unit. Ensure proper grounding.
- UV Radyasyonu: Do not look directly at the illuminated UV lamp. UV light can cause severe eye and skin irritation.
- Su Basıncı: Ensure the system is installed in a location with appropriate water pressure.
- Su sızıntısı: Inspect all connections for leaks after installation and during maintenance.
- Profesyonel Kurulum: Installation should be performed by a qualified professional to ensure compliance with local codes and proper system function.
3. Ürün Bittiview
The Viqua 650652 H PLUS system is a robust commercial UV water disinfection unit designed for high-flow applications up to 45 GPM. It features an amalgam UV lamp for extended life and enhanced performance, along with an integrated sensor for monitoring UV light intensity.
Temel Özellikler:
- Amalgam UV lamp with up to 2 years of operational life.
- Integrated sensor for continuous UV light monitoring, ensuring proper UV exposure.
- Digital display for UV lamp hayat geri sayımı.
- Compatibility with 100-240V, 50-60Hz electrical systems.
- Optional integration with a solenoid valve for automatic water shut-off in case of system errors.
Sistem Bileşenleri:
The system typically consists of a stainless steel UV chamber, a UV lamp, a quartz sleeve, a UV sensor, and a controller unit.

Image 3.1: The Viqua 650652 H PLUS Commercial UV System, showing the main unit with its controller and chamber.
4. Kurulum ve Kurulum
Proper installation is critical for the effective operation of your UV system. It is highly recommended that installation be performed by a certified plumber or qualified professional.
4.1 Kurulum Öncesi Kontroller:
- Tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun.
- Verify water quality parameters (e.g., hardness, iron, manganese) meet system requirements. Pre-filtration may be necessary.
- Select a suitable mounting location that is protected from the elements, allows for easy access for maintenance, and is close to a power outlet.
4.2 Kurulum Adımları:
- Montaj: Securely mount the UV chamber horizontally or vertically using the provided mounting brackets.
- Sıhhi Tesisat Bağlantıları: Connect the water inlet and outlet to the UV chamber. Ensure all connections are watertight.
- Quartz Sleeve Installation: Carefully insert the quartz sleeve into the UV chamber, ensuring it is centered and sealed with O-rings.
- UVLamp Kurulum: UV l'yi yerleştirinamp into the quartz sleeve. Connect the lamp connector to the controller.
- Sensör Kurulumu: Install the UV sensor into its designated port on the chamber. Connect the sensor cable to the controller.
- Elektrik Bağlantısı: Connect the controller to a grounded electrical outlet (100-240V, 50-60Hz).
- Sızıntı Kontrolü: Su vanasını yavaşça açın ve herhangi bir sızıntı olup olmadığını kontrol edin.
5. Kullanım Talimatları
Once installed, the Viqua H PLUS system operates automatically to disinfect your water supply.
5.1 İlk Başlatma:
- After completing installation and leak checks, plug in the controller.
- The system will perform a self-diagnostic test. The display will show the remaining lamp hayat geri sayımı.
- Allow water to flow through the system for several minutes to purge any air.
5.2 Normal Çalışma:
- The controller display will continuously show the number of days remaining until the UV lamp değiştirilmesi gerekiyor.
- The integrated UV sensor monitors the UV intensity. If the intensity drops below a safe level, an alarm will sound, and an error message will be displayed.
- If an optional solenoid valve is connected, it will automatically shut off the water flow upon detection of a system error (e.g., low UV intensity, lamp failure) to prevent untreated water from passing through.
6. Bakım
Regular maintenance ensures the continued effectiveness and longevity of your Viqua UV system. Always disconnect power before performing any maintenance.
6.1UVLamp Yenisiyle değiştirme:
- The amalgam UV lamp has a life expectancy of up to 2 years (approximately 17,520 hours).
- l'yi değiştirinamp when the controller indicates the end of its operational life or when an alarm signals low UV intensity.
- Refer to the specific lamp replacement instructions provided with your replacement lamp or on the Viqua webalan.
6.2 Quartz Sleeve Cleaning and Replacement:
- The quartz sleeve should be cleaned annually or more frequently if water quality dictates (e.g., high hardness leading to scaling).
- Use a soft cloth and a mild acid (e.g., citric acid or vinegar) to remove any mineral deposits.
- Replace the quartz sleeve if it is cracked, scratched, or cannot be cleaned effectively.
6.3 Sensor Maintenance:
- Periodically inspect the UV sensor for any buildup or damage. Clean as necessary following manufacturer guidelines.
7. Sorun Giderme
This section provides solutions to common issues. For problems not listed here or if issues persist, contact Viqua customer support or a qualified service technician.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| No UV light/Lamp not illuminating |
|
|
| Low UV intensity alarm |
|
|
| Water shut-off (with optional solenoid) |
|
|
| Su sızıntıları |
|
|
8. Özellikler
| Model Numarası | 650652 |
| Sistem Türü | Commercial UV Water Disinfection System |
| Akış Hızı | Up to 45 GPM (Gallons Per Minute) |
| UVLamp Tip | Amalgam Lamp |
| Lamp Hayat | Up to 2 years (17,520 hours) |
| Elektrik Gereksinimleri | 100-240V, 50-60Hz |
| Ürün Ağırlığı | 28 pound |
9. Garanti ve Destek
For warranty information, technical support, or to purchase replacement parts, please contact Viqua customer service. Ensure you have your model number (650652) and date of purchase available when contacting support.
Viqua Contact Information: Refer to the official Viqua webEn güncel iletişim bilgileri için siteyi veya satın alma belgelerinizi inceleyin.





