1. Ürün Bittiview
This manual provides instructions for the Viqua SHO600-QL UV Lamp and Quartz Sleeve Combo Kit. This kit is designed for use with Viqua UV systems including models SPV-12, SPV-600, SP600-HO, and SC/SCM-600. The ultraviolet (UV) lamp and quartz sleeve are critical components for maintaining the effectiveness of your UV water treatment system, ensuring proper disinfection by emitting specific UV intensity.
2. Ürün Bileşenleri
The Viqua SHO600-QL kit includes the following genuine Viqua components:
- One (1) Viqua UV Lamp: A high-output ultraviolet lamp with a proprietary stepped 4-pin configuration and a grey bulb base.
- One (1) Quartz Sleeve: A protective glass sleeve that houses the UV lamp within the UV system chamber.

Image 1: Viqua SHO600-QL UV Lamp and Quartz Sleeve. This image displays the two main components of the kit: the UV lamp with its grey base and 4-pin connector, and the clear quartz sleeve.
3. Önemli Güvenlik Bilgileri
Please read and understand all safety warnings before handling or installing the UV lamp ve kuvars kol.
- Elektrik Tehlikesi: Always disconnect power to the UV system before performing any maintenance or installation.
- UV Radyasyonu: Do not look directly at an illuminated UV lamp. Exposure to UV light can cause severe eye and skin damage.
- Kırılgan Bileşenler: UV benamp and quartz sleeve are made of glass. Handle with extreme care to prevent breakage.
- Sıcak Yüzeyler: UV benamp and surrounding components can become hot during operation. Allow the system to cool before handling.
4. Kurulum Yönergeleri
These are general guidelines. Refer to your specific Viqua UV system's manual for detailed installation instructions.
- Gücü Kesin: Turn off and unplug the UV system from its power source.
- Suyu Kapatın: Close the water supply valves to the UV system to prevent water flow.
- Drenaj Sistemi (gerekirse): If replacing the quartz sleeve, drain the UV chamber to avoid water spillage.
- Eski Bileşenleri Kaldırın: Eski UV koruyucu filmi dikkatlice çıkarın.amp and quartz sleeve according to your system's instructions. Dispose of old lamps responsibly.
- Install New Quartz Sleeve: If replacing, gently insert the new quartz sleeve into the UV chamber. Ensure the sleeve is properly seated and sealed with the provided O-rings and retaining nut. Avoid touching the glass directly; use clean gloves or a soft cloth.
- Yeni UV L'yi yükleyinamp: Yeni UV l'yi dikkatlice takınamp into the quartz sleeve. Align the 4-pin connector with the lamp connector on the system's power supply. Push firmly until it clicks into place.
- Su ve Elektrik Bağlantılarını Yeniden Başlatın: Slowly open the water supply valves. Check for leaks. Once confirmed, plug in and turn on the UV system.
- İşlemi Doğrulayın: Confirm the UV lamp indicator light is on, indicating proper lamp işlev.
5. Operasyon
Once installed and powered, the UV lamp emits ultraviolet light within the quartz sleeve. As water flows through the UV chamber, it is exposed to this UV light, which inactivates bacteria, viruses, and other microorganisms without adding chemicals to the water. The system's ballast or controller typically includes an indicator light or alarm to confirm the lamp is operating correctly or if it requires attention.
6. Bakım
Regular maintenance is crucial for the continuous effectiveness of your UV system.
- UVLamp Yenisiyle değiştirme: UV lamps have a limited effective life, typically 9,000 hours (approximately 12 months) of continuous operation. Even if the lamp appears to be glowing, its UV output diminishes over time. Replace the UV lamp annually to ensure consistent water disinfection.
- Kuvars Kol Temizliği: The quartz sleeve should be cleaned periodically (e.g., every 3-6 months, or as water quality dictates) to remove any mineral deposits or fouling that can reduce UV light transmission. If the sleeve cannot be cleaned effectively, it should be replaced.
- Use Genuine Viqua Parts: Always use genuine Viqua replacement lamps and sleeves. Non-genuine or
İlgili Belgeler - SHO600-QL

VIQUA UVMAX Lamp ve Kuvars Manşon Değiştirme Talimatları
UV l'yi değiştirmek için kapsamlı talimat sayfasıamp VIQUA UVMAX H, K, H+, K+, PRO10, PRO20, PRO30 ve PRO50 UV su arıtma sistemlerinde kuvars manşonun temizlenmesi/değiştirilmesi. Ayrıntılı güvenlik uyarıları, adım adım prosedürler ve bakım ipuçları içerir.
VIQUA UV Lamp ve Kuvars Manşon Değiştirme Talimat Sayfası
UV l'yi güvenli bir şekilde nasıl değiştireceğinizi öğreninamp VIQUA UV dezenfeksiyon sistemleri için kuvars kılıfı temizleyin veya değiştirin. Bu kullanım kılavuzu, güvenlik önlemlerini, bakım prosedürlerini ve cıva içeren atıkların uygun şekilde bertaraf edilmesini kapsar.amps.
VIQUA UVMAX Lamp ve Kuvars Kılıf Değiştirme Kılavuzu
Bu talimat sayfası, UV lambasının değiştirilmesi için ayrıntılı kılavuz sağlamaktadır.amp and quartz sleeve in VIQUA UVMAX water purification systems, including models H, K, PRO10, PRO20, PRO30, PRO50, PRO24-186, and PRO24-100. It covers essential safety precautions and maintenance procedures for optimal system performance.
VIQUA D4 UV Su Sistemi Kullanım Kılavuzu ve Kurulum Kılavuzu
VIQUA D4 UV su arıtma sistemi için güvenlik, işletme, bakım, sorun giderme ve teknik özellikleri kapsayan kapsamlı kullanıcı el kitabı ve kurulum kılavuzu. UV su arıtma sisteminizi optimum performans ve güvenlik için nasıl kuracağınızı, çalıştıracağınızı ve bakımını yapacağınızı öğrenin.
VIQUA UV Lamp ve Kuvars Manşon Değiştirme ve Bakım Talimat Sayfası
UV l'yi değiştirme ve bakım için kapsamlı talimat sayfasıampVIQUA UV su dezenfeksiyon sistemlerindeki (Tap, Ev ve Profesyonel serisi modelleri dahil) kuvars kılıflar ve s'ler. Güvenlik önlemleri, adım adım prosedürler ve temel bakım ipuçları hakkında bilgi edinin.
VIQUA UV Water Purifier Lamp and Quartz Sleeve Replacement & Maintenance Guide
This instruction sheet from VIQUA provides detailed guidance on replacing and maintaining UV lamps and quartz sleeves for various VIQUA UV water purifier models, including safety precautions and step-by-step procedures.