CDN DTP482 Digital Programmable Probe Thermometer/Timer User Manual

1. Ürün Bittiview

The CDN DTP482 Digital Programmable Probe Thermometer/Timer is designed for precise temperature monitoring during cooking. It features a high-heat stainless steel probe and cable, making it suitable for various cooking methods including roasting, barbecuing, candy making, and deep-fat frying. The unit allows users to monitor internal food temperatures without opening oven doors, and an alarm sounds when the desired temperature is reached.

Key features include pre-programmed USDA safe cooking temperatures for various meats, a customizable alert mode, and a timer function. The control module can be placed on a countertop or attached to a magnetic surface.

Image 1.1: The CDN DTP482 Digital Programmable Probe Thermometer/Timer, showing the main unit, probe, and cable.

2. Kurulum

2.1 Pil Kurulumu

The thermometer requires one AAA battery, which is included. To install:

1. Ünitenin arkasındaki pil bölmesini bulun.
2. Pil bölmesinin kapağını açın.
3. Bir adet AAA pili, doğru kutuplara (+/-) dikkat ederek takın.
4. Pil bölmesi kapağını sıkıca kapatın.

2.2 Prob Bağlantısı

Connect the stainless steel probe cable to the designated port on the side of the thermometer unit. Ensure the connection is firm.

Resim 2.1: Arka view of the thermometer, illustrating the battery compartment and the fold-out stand for countertop use.

3. Kullanım Talimatları

3.1 Güç Açma/Kapama ve Sıcaklık Birimi Seçimi

• To power on, slide the ON/OFF switch located on the side of the unit.
• To select between Fahrenheit (°F) and Celsius (°C), use the switch on the back of the unit.

3.2 Using Meat Mode

Meat Mode allows you to select a type of meat and desired doneness, with pre-programmed USDA safe cooking temperatures.

1. Insert the probe into the thickest part of the food, avoiding bone or gristle.
2. Basın ET button to cycle through meat types (e.g., Beef, Veal, Pork, Chicken, Turkey, Fish).
3. Basın TATMAK button to select the desired doneness (e.g., Rare, Medium, Well Done). The display will show the target temperature and the current internal temperature.
4. Place the food in the oven or on the grill, ensuring the probe cable is not pinched or exposed to direct flame.
5. An alarm will sound for 60 seconds when the food reaches the set temperature.

3.3 Using Alert Mode

Alert Mode allows you to set a custom target temperature, useful for candy making, deep frying, or specific recipes.

1. Basın MOD button until "ALERT" is displayed.
2. Basın AYARLAMAK button. The target temperature will flash.
3. Kullanın HR (yukarı ve DAKİKA (down) buttons to adjust the target temperature.
4. Basmak AYARLAMAK Tekrar onaylamak için.
5. Insert the probe into the food or liquid. For candy/deep frying, use the stainless steel clip to secure the probe to the saucepan edge, ensuring the probe tip is immersed but not touching the bottom.
6. An alarm will sound for 60 seconds when the set temperature is reached.

3.4 Using Timer Mode

The timer can count up or down, up to 24 hours by minutes.

1. Basın MOD "TIMER" yazısı görünene kadar düğmeye basın.
2. To set a countdown timer: Press the AYARLAMAK düğmesini kullanın. HR Ve DAKİKA İstediğiniz zamanı ayarlamak için düğmelere basın. BAŞLAT/DURDUR başlamak için.
3. To use as a count-up timer: Ensure the timer is set to 00:00. Press BAŞLAT/DURDUR Yukarı doğru saymaya başlamak için.
4. Basmak BAŞLAT/DURDUR to pause or resume the timer.
5. An alarm will sound for 60 seconds when the countdown timer reaches zero.

Image 3.1: Close-up of the thermometer's digital display, showing current temperature, target temperature, and selected meat/doneness settings.

4. Bakım

4.1 Temizlik

• Paslanmaz çelik prob ve kablo, bir bezle silinerek temizlenebilir.amp bez ve yumuşak deterjanla temizleyin.
• The main thermometer unit should be wiped clean with a damp bez. Ana üniteyi suya batırmayın.
• Ensure the probe connector port is dry before re-connecting the probe.

4.2 Depolama

Store the thermometer and probe in a dry place when not in use. The unit features a fold-out stand for countertop display and a magnetic back for attachment to metal surfaces.

5. Sorun Giderme

• Ekranda görüntü yok / Görüntü soluk: Check battery installation. Replace with a fresh AAA battery if necessary.
• Hatalı Sıcaklık Ölçümleri: Ensure the probe is fully inserted into the thickest part of the food, avoiding bone. Verify the probe cable is securely connected to the main unit.
• Sonda Hasarı: The probe and cable are designed for high heat, but avoid exposing the plastic main unit to extreme temperatures. DO NOT attach the main unit to a hot barbecue or place it inside an oven, as the plastic case will melt.
• Alarm Çalmıyor: Check that the target temperature or timer is correctly set. Ensure the unit is powered on.

6. Özellikler

7. Garanti ve Destek

For specific warranty information and customer support regarding your CDN DTP482 Digital Programmable Probe Thermometer/Timer, please refer to the documentation included with your purchase or visit the official CDN website. Contact information for CDN is typically available on their product packaging or webalan.

Manufacturer: CDN

Telefon: 800-338-5594