SMARTOP TECH FP31 Mini Printer User Guide

SMARTOP TECH FP31 Mini Printer

Özellikler

• Ürün Adı: Mini Yazıcı
• Bağlantı: Bluetooth (via Faith Tag uygulama)
• Şarj Portu: Tip-C
• Güç Girişi: DC 5V (via Type-C port)
• Kağıt Türü: Self-adhesive paper roll
• Emniyet: FCC Compliant, IC RF Exposure Compliant

Ürün Kullanım Talimatları

• Başlarken
  • Uygulamayı indirin: Arama the ‘Faith Tag’ app on the App Store or Google Play.
• Yazıcıyı Şarj Edin:
  • Prepare your own DC 5V power adapter with a Type-C port.
  • Insert the Type-C end of the USB cable into the printer’s Type-C charger port.
  • Plug the other end of the Type-C cable into the Type-C port of your power adapter.
  • The indicator light will flash slowly with a white light while charging.
  • Charge for at least 30 minutes for quick use, or 2 hours for a full charge.
  • When fully charged, the indicator light will stay white (if turned on) or go out (if turned off).
  • Unplug the charger promptly once fully charged. Avoid using the printer while charging, as it may reduce charging speed, compromise print quality, and shorten battery life.
• Loading/Replacing the Paper Roll
  • Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment.
  • Push the Cover Open Button towards the arrow to open the Paper Compartment.
  • Pull out the Movable Damper to remove the paper roll to be replaced.
  • Some paper rolls include tubes. Remove the paper tube after running out.
  • Milin bir bölümünü takılacak kağıt rulosunun içine yerleştirin.
  • Place the paper roll into the Paper Compartment.
  • Movable D'yi yeniden yükleyinampve kağıt rulosunun kenarına doğru itin.
  • Pull the paper roll out until it extends beyond the Paper Output Slot.
  • Üst Kapağı kapatın.
• Yazıcıyı Açma
  • Long press the Power Button for three seconds until the Indicator Light is on.
• Bluetooth ile bağlanma
  • Open the ‘Faith Tag' uygulama.
  • The app will request permission to use Bluetooth. Tap ‘OK’ to grant permission.
  • Tap ‘Connect’ on the home page.
  • Once connected, tap the home page to view senaryolar.
• Baskı
  • After connecting, tap ‘Print’.
  • Tap ‘Print’ again to confirm.
  • Baskı işlemi tamamlandı.
• Tearing Off Labels
  • Etiketi Kağıt Çıkışı boyunca yırtın.
  • Alttaki kağıdı çıkarın.
  • Stick the label onto a dry surface.
• Sorun giderme
  • Yazıcı açılmıyor: Ensure the printer is charged. Refer to ‘Charging Instructions’.
  • Yazdırma sorunları: Check if the paper roll is properly loaded. Refer to ‘Replacing the Paper Roll’.
  • Bluetooth bağlantı sorunları: Ensure Bluetooth is enabled on your device and the ‘Faith Tag’ app has permission to use it. Try restarting the printer and the app.
  • Baskı kalitesi düşük: Ensure the paper roll is inserted correctly and is not old or damaged. The print head may be hot; allow it to cool down before further use.
  • Interference (FCC/IC): This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Ürün Tanıtımı

1.1 Paketleme Listesi

O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.
1.2 Yazıcı Parçaları Talimatı

Başlarken

2.1 Uygulamayı İndirme
Arama the “FaithTag” app on App Storeo or Google PlayTM for download and installation.

2.2 Kullanım Kılavuzu
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”

Yazıcıyı açmak için, Gösterge Işığı yanana kadar Güç Düğmesine üç saniye boyunca uzun basın.

Connection complete. Tap the homepage to view scriptures.

Kağıt Rulosunu Değiştirme

Take out a brand new paper rollZ01
Please skip this step if the paper roll you ave is not newly purchased and boxed.
Kağıt Rulosu Milini çıkarmak için Kapak Açma Düğmesini ok yönünde itin.

Şarj Talimatları

1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge: when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.

Özel Notlar

Şirket, bu kılavuzun revizyonu ve açıklaması için tüm sorumluluğu üstlenir ve doğruluğunu garanti etmek için azami özeni gösterir. Bununla birlikte, ürüne yönelik herhangi bir teknik iyileştirmenin ayrı olarak bildirilmeyebileceğini ve bu kılavuzdaki ürün, aksesuarlar, yazılım arayüzleri vb. görsellerinin yalnızca resim ve referans olarak hizmet ettiğini lütfen unutmayın. Ürün güncellemeleri ve yükseltmeleri nedeniyle, gerçek ürün görsellerden biraz farklı olabilir. Doğru temsiller için lütfen fiziksel ürüne bakın.