SKYKING D4 Mini Printer Instruction Manual

SKYKING D4 Mini Printer Instruction Manual

SKYKING-logo

SKYKING D4 Mini Printer

SKYKING-D4-Mini-Printer-product

Üzerindeview

The MINI Printer is an easy-to-operate children’s digital printer with a unique shape and is designed to make imagination and learning fun. Please read the manual carefully, follow warnings and precautions, and keep it for future reference.

Özellikler

  • İlk kullanım: charge first, then unplug the charger before use
  • Güç açık: long-press the power key for 3 seconds to boot
  • Şarj gereksinimi: use a 5V charger to avoid damage
  • Print depth control: adjustable in the app under the “Concentration” section (Light, Medium, Dark, or Customized)
  • FCC uyumluluğu: Class B digital device (Part 15), with operation subject to two conditions

Quick Setup & Use

  1. For first use, charge the printer, then unplug the charger before operating.
  2. Power on by long-pressing the power key for 3 seconds.
  3. Install the app “iBleem” (via Apple App Store or Google search) on your mobile phone.
  4. Enable Bluetooth and connect using the iBleem app: in the app’s “My Device” tab, connect to the Bluetooth printer.
  5. After successful connection, print a note from the app.
  6. To replace paper: remove the old paper roll and insert the new roll in the direction shown; ensure the paper is straight (not crooked). Expose about 2 cm of the thermosensitive paper into the paper bin opening so the machine can absorb paper automatically, then close the paper bin.

Kısa Tanıtım

Welcome and thank you for choosing our products. In order to understand and use our products more quickly, it is recommended that you read this manual carefully before use and keep it properly for future reference. Warnings and precautions in the instruction manual should be complied with. If there is any reference error, we hope that users will understand that the design content will be changed without notice. This product is a unique shape, exquisite design, easy-to-operate children’s digital printer, designed for children’s digital products, so that children in use to learn more imagination and play, experience the fun of nature.

Anahtar/arayüz belirtimi

SKYKING-D4-Mini-Printer-fig- (1)

Lütfen ilk kez şarj edin ve kullanmadan önce şarj cihazının fişini çekin.

Sihirbazı kullanma

  1. First use: please charge first, long-press the power key 3 seconds to boot.SKYKING-D4-Mini-Printer-fig- (2)
  2. Apple Store or Google search: iBleem, installed APP to use.SKYKING-D4-Mini-Printer-fig- (3)
  3. Bluetooth etkinleştirildikten sonra cep telefonundan indirilen uygulamayı kullanarak “Cihazım”ın TAB çubuğundaki Bluetooth yazıcıya bağlanın. Başarılı bağlantıdan sonra not yazdırılabilir.SKYKING-D4-Mini-Printer-fig- (4)

Kağıt değiştirme kursu

  1. Eski kağıt rulosunu çıkarın ve yeni kağıt rulosunu gösterilen yönde yerleştirin. Kağıt düz bir şekilde konulmalı ve çarpık olmamalıdır. Note: The new thermosensitive paper needs to be exposed to 2 cm of paper bin length so that the machine can absorb paper automatically when the paper bin is shapedSKYKING-D4-Mini-Printer-fig- (5)
  2. Kağıt haznesini kapatın, makine normal kullanımdan sonra kağıdı otomatik olarak emebilir.SKYKING-D4-Mini-Printer-fig- (6)
  3. Yukarıdaki adımlar doğru olduktan sonra, makine normal şekilde yazdırabilir.SKYKING-D4-Mini-Printer-fig- (7)

Pil Uyarı Notu

  • Makineye zarar vermemek için lütfen spesifikasyona göre şarj etmek için 5V şarj cihazı kullanın.
  • Sökme, darbe, ekstrüzyon veya yangın yasaktır;
  • Şiddetli şişkinlik meydana gelirse kullanmaya devam etmeyin;
  • Do not put in a high-temperature environment; battery after immersion is prohibited to use;
  • Replacement with the wrong type of battery can be explosive; be sure to follow the instructions to dispose of used batteries.

Dikkat edilmesi gereken hususlar

  • Şarj ederken, aşırı kuvvetin bağlantı noktasına zarar vermesini önlemek için lütfen şarj hattını yavaşça takın veya çıkarın;
  • Şarj ettikten sonra, lütfen şarj hattını zamanında çıkarın;
  • In order to avoid danger, do not use or charge in high-temperature, high-humidity, excessive smoke and dust environments, such as: bathroom, steam room, open fire, etc;
  • Yanlış şarj, yazıcı kafasının hasar görmesine neden olabilir;
  • Aşırı ısınmayı ve haşlanmayı önlemek için yazıcı kafasına dokunmayın;
  • The tear paper blade sharp; be careful not to touch.

The depth of the print can be controlled through the APP in the »Concentration« section as shown in the picture below. The concentration setting can be set to Light, Medium, Dark or Customized.

SKYKING-D4-Mini-Printer-fig- (8)

FCC Uyarısı

Bu cihaz FCC Kuralları'nın 15. bölümüne uygundur. Çalışma aşağıdaki iki koşula tabidir:

  1. Bu cihaz zararlı girişime neden olmayabilir ve
  2. Bu cihaz, istenmeyen çalışmaya neden olabilecek girişimler dahil olmak üzere alınan her türlü girişimi kabul etmelidir. Uyumluluktan sorumlu tarafça açıkça onaylanmayan herhangi bir Değişiklik veya modifikasyon, kullanıcının ekipmanı çalıştırma yetkisini geçersiz kılabilir.

Not: Bu ekipman test edilmiş ve FCC Kuralları'nın 15. bölümüne göre Sınıf B dijital cihaz için sınırlara uyduğu bulunmuştur. Bu sınırlar, konut kurulumunda zararlı girişime karşı makul koruma sağlamak üzere tasarlanmıştır. Bu ekipman radyo frekansı enerjisi üretir, kullanır ve yayabilir ve talimatlara uygun şekilde kurulmaz ve kullanılmazsa radyo iletişimlerinde zararlı girişime neden olabilir. Ancak, belirli bir kurulumda girişimin olmayacağına dair bir garanti yoktur. Bu ekipman radyo veya televizyon alımında zararlı girişime neden olursa, bu durum ekipmanı kapatıp açarak belirlenebilir, kullanıcının aşağıdaki önlemlerden bir veya daha fazlasıyla girişimi düzeltmeye çalışması önerilir:

  • Alıcı anteni yeniden yönlendirin veya yerini değiştirin.
  • Ekipman ile alıcı arasındaki mesafeyi artırın.
  • Ekipmanı, alıcının bağlı olduğu devreden farklı bir devre üzerindeki prize bağlayın.
  • Yardım için satıcınıza veya deneyimli bir radyo/TV teknisyenine danışın.

Cihaz genel RF maruziyet gereksinimlerini karşılayacak şekilde değerlendirilmiştir. Cihaz, kısıtlama olmaksızın taşınabilir maruziyet koşullarında kullanılabilir.

Sorun giderme

  • Printer will not boot: For first use, ensure it has been charged, then long-press the power key for 3 seconds to start.
  • Cannot connect / print: Confirm Bluetooth is enabled and connect to the Bluetooth printer through the iBleem app under “My Device.”
  • Paper not feeding or printing stops: Check that the new thermosensitive paper is inserted straight (not crooked) and that approximately 2 cm of paper is exposed into the paper bin opening before closing the bin.
  • Print head issues / overheating concerns: Do not touch the print head; improper charging may lead to print head damage. Stop use if conditions suggest damage (e.g., severe bulging in the battery).
  • Charging/port concern: Insert or pull out the charging line gently to prevent excessive force that could damage the charging port, and unplug after charging.

Belgeler / Kaynaklar

PDF thumbnailD4 Mini Yazıcı
Instruction Manual · 2BKNV-D4, 2BKNVD4, D4 Mini Printer, D4, Mini Printer, Printer

Referanslar

Bir Soru Sorun

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Bir Soru Sorun

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.