LED kontrol birimi
(Multi-Zone)

M1C Wireless Controller

The Mini Pro Series LED Remote Control adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (in an unobstructed environment).
When paired with the P5 Controller, one controller is compatible with 5-channel output and supports five types of lamps: DIM, CT, RGB, RGBW, and RGBCW. Within the effective control range, one remote control can control an unlimited number of controllers,  and realize functions such as light on/off, brightness adjustment, color temperature tuning, RGB static color selection, dynamic mode effects activation, and scene recall—meeting users’ needs for different lighting applications.
For zone control: One remote control can manage multiple zones, and multiple controllers can be coded into the same zone to achieve group control of that zone. Pressing the master on/off key of the remote control once can turn on/off the lights in all zones.

Teknik Parametreler

Örnek	M1C	M1D	M2C	M2D	M4C	M4D	M5C	M5D
Renk	Beyaz	Siyah	Beyaz	Siyah	Beyaz	Siyah	Beyaz	Siyah
Karartma Tipi	Sönük		CT		RGB/ RGBW		RGBCW
Kablosuz tip	RF 2.4GHz
çalışma hacmitage	3Vdc (Button battery CR2032×1)
Bekleme akımı	＜ 2uA
Uzak mesafe	30M (Under unobstructed conditions)
Uyumlu Kontrolörler	P1、P2、P3、P4、 P5		P2、P3、P4、 P5		P3、P4、 P5		P5
Çalışma sıcaklığı.	-25℃~50℃
Ağırlık	40 gr±10 gr
Boyutlar	104×58×9mm (remote)，108×63×14mm (remote+hold)

Boyutlar

Ürün Kurulumu

Uzak tutucuyu düzeltmenin iki yolu:

1. Uzaktan tutucuyu iki vidayla duvara sabitleyin.
2. Uzaktan tutucuyu 3M yapıştırıcıyla duvara sabitleyin.

Yedek pil

Düğme Fonksiyonları

Dimming Remote Control M1C/M1D

Bölge 1,2,3,4:
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).

Master Power: Turns all lights on or off.
Zone 1, 2, 3, 4: Short press to turn on and select the current zone’s light; long press to turn off the current zone’s light.
Brightness Touch Ring: Touch to change the brightness of the current zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Color Temperature Remote Control M2C/M2D

Bölge 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Brightness Touch Ring: Touch to change the color temperature of the current Zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 consecutive levels.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Düğme Fonksiyonları
RGB/RGBW Remote Control M4C/M4D

Bölge 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
White Light: For RGBW lights, short press to turn the W channel on or off; long press for 1-6 seconds to continuously adjust the W brightness.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5C/M5D

Bölge 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the color temperature/RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Color Temperature: Short press to turn the current Zone’s color temperature channel on/off; touch the color ring to switch to the color temperature touch ring; Long press to adjust the brightness of the current color temperature.
RGB: Short press to turn the current Zone’s RGB channel on/off; touch the color ring to switch to the RGB touch ring;
Long press to adjust the brightness of the current color.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

Renk	R/G/B values
Kırmızı	R100%   G0%   B0%
Sarı	R100%   G100%   B0%
Yeşil	R0%   G100%   B0%
Mavi-yeşil	R0%   G100%   B100%
Mavi	R0%   G0%   B100%
Mor	R100%   G0%   B100%
Beyaz	R100%   G100%   B100%

Dinamik mod	Red-purple gradient	Statik mod	Kırmızı
	Blue-purple gradient
	Color temperature gradient (warm yellow, cool white)		Yeşil
	Three-color gradient (RGB)
	Six-color gradient (red, green, blue, yellow, purple, cyan)		Mavi
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Sarı
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)		Mor
	Three-color gradient (RGB)		Mavi-yeşil
	White gradually brightens and darkens		Mixed light white

Kablolama Şeması

Used with P-series controllers

Kod Eşleştirme
Key pairing code

1. Short press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Not: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Kodu Temizle
To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together
Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning.
   *Remote controls of the same model can learn from each other.

Kodu Temizle
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Gösterge Işığı Durumu

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 6 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Not: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Taşıma ve Depolama

1. Toplu taşıma
   Ürünler araçlarla, teknelerle ve uçaklarla taşınabilmektedir.
   Taşıma sırasında ürünler yağmur ve güneşten korunmalıdır. Lütfen yükleme ve boşaltma işlemi sırasında şiddetli darbe ve titreşimden kaçının.
2. Depolamak
   Depolama koşulları Sınıf I Çevre Standartlarına uygun olmalıdır. Altı aydan fazla depolanan ürünlerin tekrar kontrol edilmesi tavsiye edilir ve ancak kalifiye olduktan sonra kullanılabilir.

Dikkatler

• Lütfen kuru bir kapalı ortamda kullanın;
• Pili takarken lütfen pozitif ve negatif terminali doğru şekilde bağlayın. Uzaktan kumanda uzun süre kullanılmayacaksa pili çıkarın;
• Uzaktan kumanda mesafesi kısaldığında ve/veya uzaktan kumanda sık sık çalışmadığında, lütfen pili zamanında değiştirin;
• Hasara yol açacak düşmeleri önlemek için lütfen dikkatlice alıp yere koyun;
• Bir arıza meydana gelirse, lütfen ürünleri kendi başınıza tamir etmeye çalışmayın. Herhangi bir sorunuz varsa, lütfen tedarikçilerinizle iletişime geçin.
  ※ This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.

Garanti Anlaşması

• Teslimat tarihinden itibaren garanti süreleri: 5 yıl.
• Kalite sorunları için garanti süreleri içinde ücretsiz onarım veya değiştirme hizmetleri verilmektedir.

Aşağıdaki garanti istisnaları:

Aşağıdaki koşullar ücretsiz onarım veya değiştirme hizmetlerinin garanti kapsamına girmez:

• Garanti sürelerinin ötesinde;
• Yüksek hacmin neden olduğu herhangi bir yapay hasartage, aşırı yükleme veya uygunsuz işlemler;
• Ciddi fiziksel hasara sahip ürünler;
• Doğal afetler ve mücbir sebeplerden kaynaklanan hasarlar;
• Garanti etiketleri ve barkodları zarar görmüş.
• No any contract signed by our company.
  1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
  2. Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

UYARI

• YUTMA TEHLİKESİ: Bu ürün bir düğme pil veya madeni para pil içerir.
• Yutulması halinde ÖLÜM veya ciddi yaralanma meydana gelebilir.
• Yutulan düğme pil veya madeni pil, 2 saat gibi kısa bir sürede iç kimyasal yanıklara neden olabilir.
• Yeni ve kullanılmış pilleri ÇOCUKLARIN ERİŞİMİNDEN UZAK TUTUN
• Pilin yutulduğundan veya vücudun herhangi bir yerine girdiğinden şüpheleniyorsanız derhal tıbbi yardım alın.

a) Kullanılmış pilleri yerel düzenlemelere göre çıkarın ve derhal geri dönüştürün veya atın ve çocuklardan uzak tutun. Pilleri ev çöpüne atmayın veya yakmayın.
b) Kullanılmış piller bile ciddi yaralanmalara veya ölüme neden olabilir.
c) Tedavi bilgileri için yerel zehir kontrol merkezini arayın.
d) The compatible battery type: CR2032.
e) Nominal pil hacmitage: 3Vdc.
f) Şarj edilemeyen piller şarj edilmemelidir.
g) Boşaltmaya, yeniden şarj etmeye, parçalarına ayırmaya, (üreticinin belirttiği sıcaklık derecesinin) üzerinde ısıtmaya veya yakmaya zorlamayın. Aksi takdirde havalandırma, sızıntı veya patlama nedeniyle kimyasal yanıklara neden olabilecek yaralanmalar meydana gelebilir.
h) Pillerin kutuplarına (+ ve -) göre doğru takıldığından emin olun.
i) Eski ve yeni pilleri, alkalin, karbon-çinko veya şarj edilebilir piller gibi farklı marka veya türdeki pilleri karıştırmayın.
j) Uzun süre kullanılmayan ekipmandaki pilleri yerel düzenlemelere göre çıkarın ve derhal geri dönüştürün veya atın.
k) Pil bölmesini daima tamamen sabitleyin. Pil bölmesi güvenli bir şekilde kapanmıyorsa ürünü kullanmayı bırakın, pilleri çıkarın ve çocuklardan uzak tutun.

Belgeler / Kaynaklar

LTECH M1C Wireless Controller [pdf] Kullanım Kılavuzu M1C, M1D, M2C, M2D, M4C, 4D, M5C, M5D, 301, A3, M1C Wireless Controller, M1C, Wireless Controller, Controller

Referanslar

• Kullanıcı Kılavuzu