FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productÖzellikler

  • Ürün Adı:
    FlySpark F4 V1 BLS 60A Yığını
  • Yapay Zeka Özellikleri:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • Yazılım desteği:
    Betaflight, INAV, Ardupilot, EMU uçuşu, SkyBrush
  • ESC Communication:
    BLHeli_S Bluetooth ve USB-C
  • Bağlantı:
    3-6S LiPo
  • Boyut:
    47.8mm(U) x 47.5mm(G) x 18.3mm(Y)
  • Montaj:
    30.5 x 30.5 mm ve 4 mm delik boyutu
  • Ağırlık:
    34 gr

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

Ürün Kullanım Talimatları

FlySpark F4 V1 Uçuş Kontrolörü

Düzen:
Refer to the user manual for the layout of the flight controller.

Çevresel Bağlantı:
Connect peripherals as per the provided diagram.

Uygulama ve FC Yapılandırması:
Use the recommended apps and follow the configuration instructions.

FC Yazılım Güncellemesi:
Connect the flight controller to a PC via USB for firmware updates.

FLYSPARK BLS 60A 4'Ü 1 ARADA ESC

Düzen:
Check the layout guide in the manual for proper installation.

Motorlar ve Güç Kablosu ile Bağlantı:
Connect motors and power cables securely.

ESC Yapılandırması:
Use the FlySpark app for ESC configuration settings.

ESC Yazılım Güncellemesi:
Follow the provided steps to update the firmware for ESC.

FlySpark F4 V1 BLS 60A YığınıFlySpark-F4-V1-Stack-Flight-Controller-fig-1

Özellikler BittiviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

PaketFlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • 35V 1000uF Düşük ESR Kapasitör x 1
  • M3 Naylon Somun x 4
  • SH 1.0mm 25mm uzunluğunda 8pin Kablo (FC-ESC bağlantısı için) x 1 SH 1.0mm 75mm uzunluğunda 6pin Kablo* x 1
  • M3*30mm İç-altıgen Vidalar x 4
  • DJI 6pin Kablo (80mm) x 1
  • XT60 Güç Kablosu (100mm) x 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

FC Bağlantı şemasıFlySpark-F4-V1-Stack-Flight-Controller-fig-6

FC ve ESC Bağlantılarına Kılavuz

Yöntem 1:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

Yöntem 2:

Doğrudan Lehimleme

  • Aşağıdaki ped tanımlarını izleyerek her iki uçtaki 8 ped'e 8 tel lehimleyinFlySpark-F4-V1-Stack-Flight-Controller-fig-8

Uçuş kontrolörü özellikleri

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • O6 Hava Ünitesi ile birlikte gelen 3 pinli kabloyu kullanın FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • FlySpark F6 V4 BLS 1A Yığını ile birlikte gelen 60 pinli kabloyu kullanın

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an exampley.

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

Not:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

Motorlar ve Güç Kablosu ile BağlantıFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

ESC Ürün Yazılımı Güncellemesi
Bu 8-bit 50A ESC, BLHeliS firmware ile önceden yüklenmiş olarak gelir ancak RPM filtreleme ve Çift yönlü Dshot desteği sunan Bluejay firmware'e de flaşlanabilir. Firmware'i güncellemek için şu adımları izleyin:

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. Bilgisayara bağlanın:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

UYARILAR:FlySpark-F4-V1-Stack-Flight-Controller-fig-19

  • PROPELLERS OFF: REMOVE ALL PROPELLERS.
  • SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
  • FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
  • STABLE POWER: ENSURE STABLE POWER SUPPLY.
  • www.FlySpark.in

SSS

ESC aygıt yazılımını nasıl güncellerim?

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

Belgeler / Kaynaklar

FlySpark F4 V1 Stack Flight Controller [pdf] Kullanıcı Kılavuzu
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

Referanslar

Yorum bırakın

E-posta adresiniz yayınlanmayacak. Gerekli alanlar işaretlenmiştir *