Everycom Projektör Kullanım Kılavuzu

a close up of electronics

logo

Everycom Projektör

Ürün

Önemli Güvenlik Önlemleri

  • Lütfen projektörü çalıştırmadan önce kılavuzu dikkatlice okuyun. Kararlı güç kaynağı sağlamak için lütfen standart güç kablosu kullanın.
  • Lütfen derecelendirme etiketinde belirtilen güç kaynağını ve kabloyu kullanın. Projektör bezlerden, kanepelerden ve havalandırma kepçesini engelleyebilecek herhangi bir şeyden uzak tutulmalıdır. Lütfen üniteyi yanıcı ve patlayıcı malzemelerden uzak tutun.
  • Garanti hizmetini geçersiz kılacağından lütfen üniteyi kendiniz sökmeyin. Gözlerinizi korumak için, projektör açıkken doğrudan lense bakmayın. Projektör sudan ve diğer sıvılardan uzak tutulmalıdır.
  • Elektrik çarpmasını önlemek için, lütfen projektörü yağmurdan ve nemden uzak tutun. 6 saat kesintisiz çalıştıktan sonra projektörün kapatılması önerilir. Projektörü taşırken lütfen orijinal köpüğü ve diğer yastıklama malzemelerini kullanın.
  • Projektör çalışmazsa, lütfen yetkili servis acentesi ile iletişime geçin.

Yapısal Diyagram

Yapı

  1. Dizüstü bilgisayar veya bilgisayar girişi için VGA
  2. Uzaktan kumanda için IR
  3. Ses çıkışı için kulaklık bağlantı noktası
  4. Normal sinyal girişi için AV bağlantı noktası
  5. Multimedya oynatma için USB bağlantı noktası
  6. ÇIKIŞ 5V
  7. HD sinyal girişi için HDMI bağlantı noktası

PaneI İşlevleriPanel

  1. Kaynak: giriş sinyali kaynağını seçin
  2. Menü: birden fazla işlevi çalıştır
  3. Geri dönmek
  4. Sinyal ışıkları
  5. Yukarı: yukarı taşı
  6. Güç Düğmesi: gücü açın veya kapatın
  7. Sol: sola hareket ettirin veya sesi azaltın
  8. Aşağı: aşağı git
  9. Sağ: sağa git veya sesi aç

Fonksiyon İşlemiOperasyonlar

  1. Güç
  2. En boy oranı
  3. Ok tuşları
  4. Ana sayfa
  5. Menü
  6. Sesi Azalt
  7. Ayar
  8. Ekran çevirme
  9. Kaynak
  10. Girmek
  11. Çıkış
  12. Sesi Aç
  13. Sesini kapatmak

Odak / KeystoneKilit taşı

  1. Odak
  2. Kilit taşı

Miracast Bağlantısı

Kurmak

DLNADLNA
Bluetooth Kurulumu

Bir Bluetooth cihazı bağlamak istiyorsanız, Bluetooth cihazınızı seçmek için kuruluma gidebilirsiniz — Bluetooth — Tara ve bağlantıyı onaylayın.
* Taramadan önce Bluetooth cihazınızı eşleştirme moduna ayarlamalısınız. Bluetooth

Dijital Zoom

Dijital Yakınlaştırmayı ayarlayarak resim boyutunu değiştirebilirsiniz.

* Dijital Zoom, iOS cast \ Miracast değil, yalnızca HDMI \ VGA \ AV \ Media kullanılırken ayarlanabilir.Dijital Zoom

Belgeler / Kaynaklar

PDF thumbnailProjektör
Instruction Manual · Projector

Referanslar

Sorular ve cevaplar

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Sorular ve Cevaplar

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. meu projetor não entra nas configurações eu cliquei em cima mais não entra não abre o menu de configuração
    como faço para fazer o reset nele

    Agnaldo asks meu projetor não entra nas configurações eu cliquei em cima mais não entra não abre o menu de configuração
    como faço para fazer o reset nele
    Manuals+ clarified question
    Soru

    How do I access the settings menu and perform a factory reset on my Everycom projector if the menu button is not responding?

    Cevap

    If you are unable to open the settings menu using the projector's physical buttons or the remote, please try the following steps based on the Everycom instruction manual:

    • Uzaktan Kumandayı Kontrol Edin: Şunu kullandığınızdan emin olun: Ayar button (labeled as button 7 on the remote diagram) or the Menü button (labeled as button 5 on the remote or button 2 on the projector panel).
    • Kaynak Seçimi: Sometimes the menu is inaccessible if the projector is in a specific casting mode. Try pressing the Kaynak button and switching to a standard input like HDMI or Media before attempting to enter the settings.
    • Sıfırlama Gerçekleştirme: If you can get the menu to appear, navigate to the Kurmak or Sistem section. Look for an option labeled Fabrika Varsayılanlarını Geri Yükle or Sıfırla.
    • Sert Sıfırlama: If the software menu is completely frozen and will not open, unplug the power cord from the wall outlet, wait for at least 1 minute, and plug it back in. This power cycle can sometimes clear temporary software glitches.

    If the menu still does not open after a power cycle, there may be a hardware fault with the control board or the remote receiver, and you should contact an authorized service agent as suggested in the manual's safeguards.

    Note: The provided manual image mentions 'Artlii' in the Bluetooth settings, suggesting this firmware is shared across several budget projector brands including Everycom.

Bir Soru Sorun

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.