AXIS CP11W Window Camera
Üzerindeview
The InstaVision AI Window Camera installs via a magnetic tile connection, then is configured in the InstaVision app for Bluetooth-based device discovery and Wi‑Fi connectivity so you can view Canlı kamera görüntüsü.
Özellikler
| Wi‑Fi band support | 2.4 GHz and 5 GHz (Wi‑Fi) |
| Sıfırlama düğmesi | Long press 5 seconds to restore factory settings (device gives a voice prompt) |
| TF kart yuvası | Micro TF card (for video storage and playback) |
| Güç | Güç girişi |
| Bluetooth keşfi | Required for device discovery via BLE |
Quick Setup & Use
- Install the ceramic (porcelain) tile: tear off the surface paper, paste the tile at the appropriate window position, ensure it is firmly attached and flat, and make sure the side with the magnetic ring faces into the room.
- Connect the camera: bring the camera’s magnetic-ring side close to the tile’s magnetic ring and complete connection via magnetic adsorption; ensure the camera is firmly installed and angled as required.
- Install the InstaVision app on your iPhone/Android.
- Open the app, register or log in, then go to Home Page > Add Camera and follow the preparation instructions to power on the camera properly.
- Enable Bluetooth access when prompted (required for discovery via BLE). If the device is not found, long press the reset button for 5 seconds to restore factory settings and try again.
- Connect to Wi‑Fi: select a nearby 2.4 GHz & 5 GHz Wi‑Fi network, enter the password, and wait for connection confirmation sound.
- Open the main interface to view Canlı View (live camera feed).
Arayüz açıklaması
1. Sıfırlama düğmesi
2. TF kart yuvası
3. Güç kaynağı
The working state of the device, long press
5 seconds to restore the factory settings,
the camera will have a voice prompt
yayın.
Micro TF card, storage video and playback
video.
Güç girişi
This manual is suitable for various types of cameras
(The appearance may be different due to different batches, The
details are subiect to the receipt-This manual is only for the
installation instructions of this series of equipment)
Kurulum ve yerleştirme
A1 Window Camera
1. Preparation: Make sure you have prepared this tile and the
supporting camera.
2. Porcelain tile installation: carefully tear off the centrifugal paper on
the surface of the porcelain tile, pay attention to avoid touching the
adhesive surface. Paste the porcelain tile in the appropriate position
of the window, make sure that it is firmly pasted and the surface is
flat. Make sure that the side of the tile with the magnetic ring is facing
towards the room when pasting.
3. Camera Connection: Take out the camera, put the side corresponding
to the magnetic ring close to the magnetic ring of the ceramic tile, and
complete the connection through magnetic adsorption. Ensure that the
camera is firmly installed and the position angle meets the requirements
kullanışlı.
Uygulama Kurulumu
1. Download and Install: Download and install the
InstaVision app by scanning the QRcode for the Appl
Store or Google play Store.
2. Account Registration: Open the app and register a new
account or log in to an existing account.
5. Add Camera: Navigate to the Home Page within the app.
Locate and select “Add Camera” then go through preparation
instructions to power on your camera properly,
access, which is required for device discovery. Do not skip this step.Ensn
Bluetooth access is enabled as instructed, allowing the app to discover
device via BCE,
to cn SLsto=th
* If you can’t find the device in the above steps, press and hold tt
reset button for 5 seconds, restore the camera to factory settin
ve tekrar deneyin.
5. Connect to Wi-Fi: The app Will automatically scan for nearby
2.4 GHz & 5 GHz Wi-Fi routers.Choose your desired Wi-Fi
network from the list provided. Please double-check your
Camera’s capability in terms of 2.4 GHz & 5 GHZ.
A1 Camera use Instruction video
If you need further assistance, please contact our customer
support team. You can send an email or call customer service
through the “Contact Us” page within the app.
Thank you for choosing InstaVision App. We are committed to
providing the best user experience and security protection. If
you have any suggestions or feedback, please feel free to
bize Ulaşın.
Ek yardım için lütfen müşteri destek ekibimizle iletişime geçin:
Not: Bu ekipman test edilmiş ve limitlere uygun bulunmuştur.
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
zararlı girişime karşı makul koruma sağlayacak şekilde tasarlanmıştır
bir konut kurulumunda. Bu ekipman üretir, kullanır ve yayabilir
radyo frekans enerjisi ve eğer uygun şekilde kurulmaz ve kullanılmazsa
talimatlara uyulmaması, radyo iletişimlerinde zararlı girişimlere neden olabilir.
Ancak, belirli bir durumda parazit oluşmayacağının garantisi yoktur.
Kurulum. Bu ekipman, radyo veya radyolarda zararlı parazite neden olursa
television reception, which can be determined by turning the equipment Off
ve sonrasında, kullanıcının girişimi bir veya daha fazla ile düzeltmeye çalışması teşvik edilir.
Aşağıdaki önlemlerin daha fazlası:
— Alıcı anteni yeniden yönlendirin veya yerini değiştirin.
— Ekipman ile alıcı arasındaki mesafeyi artırın.
— Connect the equipment into an outlet on o circuit different from that
Alıcının bağlandığı.
— Yardım için satıcınıza veya deneyimli bir radyo/TV teknisyenine danışın.
Important: Change or modifications not expressly approved by the
Uyumluluktan sorumlu üretici, kullanıcının yetkisini geçersiz kılabilir
ekipmanı çalıştırın.
Bu cihaz FCC Kuralları'nın 15. bölümüne uygundur. Çalıştırma
aşağıdaki iki koşula tabidir:
(1) Bu cihaz zararlı girişime neden olamaz ve
(2) bu cihaz, parazit dahil olmak üzere alınan tüm parazitleri kabul etmelidir.
İstenmeyen bir çalışmaya neden olabilecek.
Belgeler / Kaynaklar
 | CP11W Window Camera |
Referanslar
- apps.apple.com/in/app/instavision-smart-safe-home/id6479250008uygulamalar.apple.com
- Kullanıcı Kılavuzumanual.tools