Aimpoint Duty RDS Red Dot Reflex Sight 2 MOA dot User Manual

1. Ürün Bittiview

The Aimpoint Duty RDS Red Dot Reflex Sight is a robust and reliable optical sight designed for rapid target acquisition. Featuring a precise 2 MOA dot, it offers exceptional battery life and durability for various applications. This manual provides essential information for the proper setup, operation, and maintenance of your Duty RDS sight.

Figure 1: Aimpoint Duty RDS Red Dot Reflex Sight with front and rear lens covers open, showcasing the optical path.

2. Dahil Edilen Bileşenler

• Aimpoint Duty RDS Red Dot Reflex Sight
• One-piece Torsion Nut Mount
• Spacer for mount
• Allen T10 wrench (Torx)
• Flip-Up lens covers (front with black/solid, rear transparent)
• CR2032 pil
• Kullanım Kılavuzu (bu belge)

3. Kurulum

3.1 Pil Kurulumu

1. Nişangahın yan tarafında bulunan pil bölmesi kapağını bulun.
2. Unscrew the cap counter-clockwise.
3. Insert the supplied CR2032 battery with the positive (+) terminal facing outwards.
4. Carefully screw the cap back on clockwise until finger-tight. Ensure the O-ring is properly seated to maintain waterproof integrity.

3.2 Mounting the Sight

The Aimpoint Duty RDS comes with an integral Picatinny-style base for easy attachment to any Picatinny rail. Use the provided T10 Allen wrench to secure the mount firmly to your device. Ensure the sight is mounted securely to prevent movement during use.

Figure 2: The Aimpoint Duty RDS sight shown with its integrated Picatinny mount, ready for installation.

4. Kullanım Talimatları

4.1 Güç Açma/Kapatma ve Parlaklık Ayarı

The sight features 10 brightness settings. The first 7 settings are for night vision compatibility, and the remaining settings are for daylight conditions. Adjust the brightness using the tactile buttons located on the side of the sight to suit ambient light conditions.

4.2 Rüzgar Sapması ve Yükseklik Ayarlamaları

Windage and elevation adjustments are protected by screw caps. Unscrew these caps to reveal the adjustment mechanisms. Use a flathead screwdriver or a coin to make precise adjustments. Each click typically corresponds to a specific change in point of impact at a given distance. Refer to the detailed user manual for specific click values.

Şekil 3: Yan view of the Aimpoint Duty RDS, highlighting the protected windage and elevation adjustment caps.

5. Bakım

5.1 Genel Bakım ve Temizlik

Keep the sight clean from dust and debris. Use a soft, lint-free cloth to wipe the exterior. For lenses, use a lens cleaning pen or a soft brush to remove loose particles, then gently wipe with a lens cleaning cloth and solution if necessary. Avoid abrasive materials that could scratch the lenses.

5.2 Su Yalıtımı

The Aimpoint Duty RDS is submersible to 80 feet (25 meters). Ensure all caps, especially the battery compartment cap, are securely tightened to maintain its waterproof capabilities. Regularly inspect O-rings for any signs of wear or damage.

6. Sorun Giderme

If the red dot does not illuminate or appears dim:

• Check the battery: Ensure it is correctly installed with the positive (+) terminal facing outwards and is not depleted. Replace if necessary.
• Clean battery contacts: Gently clean the battery contacts inside the compartment and on the battery itself.
• Adjust brightness: Increase the brightness setting using the control buttons.
• Secure caps: Ensure the battery compartment cap is fully tightened.

For other issues, consult the full user manual or contact Aimpoint customer support.

7. Özellikler

8. Garanti ve Destek

Aimpoint, ürünlerinin normal kullanım koşullarında, malzeme ve/veya işçilik açısından orijinal üretici kusurlarından arınmış olduğunu, profesyonel veya yarış amaçlı kullanım için satın alma tarihinden itibaren 2 yıl, kişisel kullanım için ise 10 yıl süreyle garanti eder.

For further assistance, product registration, or warranty claims, please visit the official Aimpoint websiteye gidin veya doğrudan müşteri destekleriyle iletişime geçin.

Ziyaret edin Aimpoint Store Daha fazla ürün ve bilgi için.