Silverlit Drone Air Vision HD

Silverlit Flybotic Drone Air Vision HD Kullanım Kılavuzu

Model: Drone Air Vision HD

1. Giriş

Welcome to the world of aerial exploration with your new Silverlit Flybotic Drone Air Vision HD. This foldable drone is equipped with an HD camera, real-time Wi-Fi video feedback to your smartphone, and an integrated obstacle detector for a secure and enjoyable flight experience. This manual will guide you through the setup, operation, and maintenance of your drone.

The drone features automatic takeoff and landing, hover mode for stability, and comes with two rechargeable batteries for extended flight time. Its foldable design and included carrying pouch make it highly portable.

2. Güvenlik Bilgileri

WARNING: Not suitable for children under 36 months. Contains small elements that may be swallowed.

  • Always operate the drone in open, unobstructed areas, away from people and animals.
  • Ensure the drone's battery and remote controller batteries are fully charged before each flight.
  • Şiddetli rüzgarlarda veya olumsuz hava koşullarında dronu uçurmayın.
  • Dönen pervanelerden parmaklarınızı ve saçlarınızı uzak tutun.
  • İnsansız hava aracını çalıştırmadan önce tüm talimatları okuyun ve anlayın.

3. Kutuda Neler Var?

  • Flybotic Drone Air Vision HD
  • Uzaktan Kumanda
  • 2 Rechargeable Drone Batteries
  • Taşıma Kesesi
  • USB Şarj Kablosu
  • Yedek Pervaneler
  • Pervane Muhafızları
  • Tornavida
Flybotic Drone Air Vision HD product box showing contents.

Product packaging for the Flybotic Drone Air Vision HD, detailing key features and included accessories.

4. Kurulum

4.1 Unboxing & Initial Inspection

Carefully remove all components from the packaging. Inspect the drone and accessories for any signs of damage.

Flybotic Drone Air Vision HD with remote controller and smartphone.

The Flybotic Drone Air Vision HD, shown with its foldable design, remote controller, and a smartphone mounted for live video feed.

4.2 Battery Charging & Installation

  • Drone pilini USB şarj kablosuna bağlayın.
  • Plug the USB cable into a 5V/2A power adapter (not included). The indicator light on the cable will show charging status (e.g., red for charging, green for full).
  • Once fully charged, insert the battery into the drone's battery compartment.
  • The remote controller requires 3xAA batteries (not included). Open the battery compartment on the back of the controller and insert the batteries, ensuring correct polarity.

4.3 Propeller Guard Installation/Removal

To install propeller guards, slide the curved surface of the guard upwards under the drone's motor. Position the guard onto the locking tabs at the base of the motor and apply slight upward pressure to securely clip it in place. To remove, press down on the guard near the motor base to release the clips.

4.4 Propeller Installation/Removal

To remove a propeller, hold the drone's motor firmly and use the provided screwdriver to unscrew the retaining screw. Carefully lift the propeller off. To install, ensure you match the propeller type (A or B) to the corresponding arm (A or B) marked on the drone. Place the propeller onto the motor shaft, insert the screw, and tighten it with the screwdriver, holding the motor in place.

4.5 Uygulama İndirme ve Bağlantı

Download the dedicated drone application from your smartphone's app store. Power on the drone and the remote controller. Connect your smartphone to the drone's Wi-Fi network (usually named after the drone model). Launch the app to view the live video feed and access additional controls.

4.6 Pairing & Calibration

Place the drone on a flat, level surface. Power on the drone and then the remote controller. The indicator lights on both devices will flash. Briefly press the 'One-Touch Calibration' button on the remote. The remote will beep, and the drone's lights will flash rapidly, indicating successful calibration. To unlock the drone, push the left joystick to the 7 o'clock position and the right joystick to the 5 o'clock position simultaneously. The propellers will start spinning slowly, indicating the drone is unlocked and ready for flight. To disable unlocking, push the left joystick all the way down.

A comprehensive tutorial demonstrating the setup, pairing, calibration, basic flight operations (takeoff, landing, directional control), speed adjustments, headless mode, 3D flips, camera angle control, photo/video capture, and media viewing for the M18LCD drone.

5. Kullanım Talimatları

5.1 Automatic Takeoff & Landing

After successful pairing and calibration, press the 'Automatic Takeoff/Landing' button on the remote controller. The drone will automatically ascend to approximately 1 meter and hover. To land, press the same button again, and the drone will gently descend and land.

5.2 Manual Takeoff & Landing

After unlocking the drone (propellers spinning slowly), gently push the left joystick upwards to make the drone ascend. To land manually, pull the left joystick downwards until the drone lands and the propellers stop spinning.

5.3 Yön Kontrolü

  • Sol Joystick: Yüksekliği (yukarı/aşağı) ve sapmayı (sola/sağa dönüş) kontrol eder.
  • Sağ Joystick: İleri/geri hareketi ve sola/sağa doğru hareketi kontrol eder.

5.4 Hız Ayarı

The drone has multiple speed settings. Press the speed adjustment button (usually located on the top left of the remote) to cycle through different speed modes (e.g., low, medium, high). The remote will emit a corresponding number of beeps to indicate the current speed mode.

5.5 Başsız Modu

To activate headless mode, press and hold the headless mode button on the remote until it beeps and a blue light on the drone's rear flashes. In headless mode, the drone's orientation is fixed relative to the remote controller, making it easier to control regardless of which way the drone is facing. For example, pushing the right joystick forward will always make the drone fly away from you.

5.6 3D Flip/Roll

To perform a 3D flip, press the '3D Flip' button (usually on the top right of the remote). The remote will beep. Then, push the right joystick in the desired direction (forward, backward, left, or right) to execute the flip. The drone will perform a 360-degree roll in that direction.

5.7 Kamera Kullanımı (Fotoğraf/Video)

Ensure a Micro SD card (up to 32GB, not included) is inserted into the remote controller for photo and video storage. To take a photo, briefly press the 'Photo' button. The screen will display 'Photo taken successfully'. To record a video, briefly press the 'Video Record' button. The screen will display 'Recording in progress'. Press the button again to stop recording.

5.8 Kamera Açı Ayarı

The drone's HD camera angle can be adjusted directly from the remote controller. Use the camera up/down buttons (usually located on the top right side of the remote) to tilt the camera up or down, allowing you to capture different perspectives during flight.

5.9 Viewing Photos & Videos

İle view captured media, press and hold the 'Photo File' button to enter photo viewing mode. Use the 'Previous File' and 'Next File' buttons to navigate through your photos. Similarly, press and hold the 'Video File' button to enter video viewing mode. Select a video and press the 'Play/Pause' button to watch it. Press and hold the 'Home' button to exit file viewmodu.

5.10 Akıllı Engelden Kaçınma

The drone is equipped with an integrated obstacle detector. This feature helps prevent collisions by automatically adjusting the drone's flight path when obstacles are detected, making it safer for beginners.

5.11 Yörünge Uçuşu

Using the companion app, you can draw a flight path on your smartphone screen. The drone will then automatically follow this trajectory, allowing for pre-planned and precise flight routes.

5.12 Optik Akış Konumlandırması

The optical flow positioning system provides enhanced flight stability, especially during hovering. It uses a downward-facing camera to detect ground patterns and maintain a stable position, resulting in smoother and more controlled flight.

Demonstration of the F417 LED drone's features, including obstacle avoidance, trajectory flight, and optical flow positioning.

6. Bakım

  • Clean the drone and remote controller with a soft, dry cloth after each use.
  • Avoid exposing the drone to water or extreme temperatures.
  • Store the drone in its carrying pouch in a cool, dry place when not in use.
  • Remove batteries from the remote controller if storing for extended periods.

7. Sorun Giderme

  • İHA yanıt vermiyor: Hem dronun hem de uzaktan kumandanın açık olduğundan ve başarılı bir şekilde eşleştirildiğinden emin olun. Pil seviyelerini kontrol edin.
  • Kararsız uçuş: Perform calibration on a flat surface. Check for damaged propellers and replace if necessary.
  • Video yayını yok: Ensure your smartphone is connected to the drone's Wi-Fi network and the app is open. Check camera connection.
  • Kısa uçuş süresi: Ensure batteries are fully charged. Flight time can be affected by wind conditions and aggressive flying.

8. Özellikler

ÖzellikDeğer
Ürün Boyutları (U x G x Y)7.5x29x20 cm
Ağırlık560 gram
Önerilen Yaş14 yaş ve üzeri
Model Numarası54080
Ana MalzemePlastik
Uzaktan Kumanda DahilEvet
RenkSiyah
Özel ÖzelliklerIntegrated Obstacle Detector, Hover Flight
Video Kayıt Çözünürlüğü720p
Bağlantı TeknolojisiWifi
Video Yakalama FormatıMP4
Kontrol TürüUzaktan kumanda

9. Garanti ve Destek

For warranty information, technical support, or to purchase replacement parts, please refer to the full product manual included in the box or visit the official Silverlit website. Contact details for customer service can typically be found on the product packaging or the manufacturer's webalan.

İlgili Belgeler - Drone Air Vision HD

Önview Silverlit BumperDrone HD 84813 Kullanım Kılavuzu
Silverlit BumperDrone HD (Model 84813) kurulumu, uçurulması ve sorun gidermeye ilişkin kapsamlı kılavuz; uçuş kontrolleri, pil şarjı ve güvenlik talimatlarını içerir.
Önview İlk Uzaktan Kumandalı Drone'um: Kullanım Kılavuzu ve Uçuş Rehberi | Silverlit
Silverlit My First RC Drone (Model 84773 IM) için kapsamlı kullanıcı kılavuzu ve rehber. Bu kapalı alan oyuncak drone için kurulum, uçuş kontrolü, güvenlik önlemleri, sorun giderme ve pil şarjı hakkında bilgi edinin.
Önview Silverlit Akrobasi Drone 84841 Kullanım Kılavuzu ve Çalıştırma Talimatları
Silverlit Stunt Drone 84841 için kapsamlı bir kılavuz; teslimat içeriği, güvenlik önlemleri, parça tanımlama, pil takma ve şarj etme, uçuş işlemleri, sorun giderme ve kalibrasyon prosedürlerini kapsamaktadır.
Önview Silverlit Spy Racer Drone 84842: Fotoğraf ve Video Çekimi Uçuş Kılavuzu
Silverlit Spy Racer drone (model 84842) için kurulum, uçuş kontrolleri, güvenlik önlemleri, sorun giderme ve fotoğraf ve video çekimi için pil takma konularını kapsayan kapsamlı kullanım kılavuzu.
Önview Silverlit Bumper Drone Lite Kullanım Kılavuzu ve Talimatları
Silverlit Bumper Drone Lite (Model 84826) için kurulum, çalıştırma, güvenlik ve sorun giderme konularını kapsayan kapsamlı kılavuz.
Önview Silverlit NEON STUNT Drone Kullanım Kılavuzu
Silverlit NEON STUNT drone (Model 84827) için kurulum, uçuş kontrolleri, güvenlik önlemleri, sorun giderme ve teknik özellikler hakkında talimatlar içeren kullanım kılavuzu.