1. Giriş
The FLSUN S1 Pro is an advanced FDM Delta 3D printer designed for high-speed and high-precision additive manufacturing. It features an ultra-fast printing speed of up to 1200mm/s and an acceleration of 40,000mm/s², significantly reducing print times. Equipped with Klipper firmware, a 7-inch smart touch screen, and a 350℃ all-metal hotend, the S1 Pro supports a wide range of filaments, including high-performance engineering materials. Its large build volume of Φ320*320*430 mm³ accommodates substantial projects. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your FLSUN S1 Pro 3D Printer.
Resim 1.1: Ön view of the FLSUN S1 Pro 3D Printer, showcasing its sleek design and enclosed build chamber.
2. Kutuda Neler Var?
Paketi açtığınızda lütfen tüm bileşenlerin mevcut olduğundan emin olun:
- FLSUN S1 Pro 3D Printer (main unit)
- Filament Kurutma Kutusu
- Güç kablosu
- USB kablosu
- Alet Takımı (çeşitli anahtarlar, tornavidalar vb.)
- Sample Filament
- Kullanım Kılavuzu (bu belge)
- Hızlı Başlangıç Kılavuzu
Image 2.1: The FLSUN S1 Pro 3D Printer and its included accessories, demonstrating its 95% pre-assembled state.
3. Kurulum Talimatları
The FLSUN S1 Pro is designed for quick setup, being 95% pre-assembled. The initial setup typically takes less than 10 minutes.
- Paketin açılması: Yazıcıyı ve tüm aksesuarlarını dikkatlice ambalajından çıkarın.
- Atama: Yazıcıyı iyi havalandırılan bir alanda, sabit ve düz bir yüzeye yerleştirin.
- Toplantı: Install the door and glass panels as per the instructions in the detailed Kurulum Kılavuzu (PDF).
- Güç Bağlantısı: Yazıcının güç kablosunu uygun bir elektrik prizine bağlayın.
- İlk Güç Açma: Turn on the printer using the main power switch. The device will perform self-checks to ensure stability.
- Otomatik Tesviye: The printer features automatic leveling. Follow the on-screen prompts on the 7-inch touch screen to initiate and complete the leveling process. This ensures optimal print bed calibration.
- Filament Yükleme: Load your desired filament into the filament dryer box and then guide it into the extruder as instructed on the display.
- Ağ bağlantısı: Connect the printer to your local Wi-Fi network via the touch screen interface for remote monitoring and control.
Ayrıntılı görsel talimatlar için lütfen resmi talimatlara bakın Kurulum Kılavuzu (PDF).
4. Kullanım Talimatları
4.1 User Interface and Control
The FLSUN S1 Pro utilizes a 7-inch Klipper firmware smart touch screen for intuitive control. The visual operation interface allows for smart adjustment and monitoring directly from the printer. Additionally, with advanced Microtac radar control and Wi-Fi connectivity, you can monitor and control your printer in real-time from mobile phones and PCs.
Image 4.1: Remote control and monitoring capabilities via the FLSUN World app on a mobile device.
- Uzaktan kumanda: Manage your printers remotely from anywhere.
- Tap it, Print it, Like it: Start printing tasks with a quick tap on the FLSUN World app, utilizing cloud storage for G-code files.
- Monitor in Pocket: Real-time checking of your printing progress.
- Smart Reminder: Receive notifications when print errors occur.
4.2 Baskı İşlemi
- Modeli Hazırlayın: Use compatible slicing software (FLSUN Slicer V2.0 or other slicers like PrusaSlicer, Cura) to prepare your 3D model. Ensure settings are optimized for the S1 Pro's capabilities, including its high speed and acceleration.
- Aktarım File: Dilimlenmiş G-kodunu aktarın file to the printer via USB or Wi-Fi (FLSUN World app).
- Yazdırmaya Başla: Seçin file on the touch screen or through the app and initiate the print.
- İzleme: Utilize the built-in camera for real-time monitoring and time-lapse recording. The printer's low noise level (55dB) ensures a quiet operating environment.
- Power-Off Resume: In case of power interruption, the printer supports power-off continuous printing, resuming from where it left off. Vibration compensation further ensures print quality.
Image 4.2: Illustration of the FLSUN S1 Pro's epic speed capabilities: 1200mm/s max printing speed, 40000mm/s² max acceleration, and 110mm³/s peak flow rate.
Image 4.3: Key features for smooth and consistent printing, including AI-powered functions, auto-leveling, spaghetti detection, and perfect first layer adhesion.
Image 4.4: Advanced features like the Air Filter, Filament Dryer, Built-in camera, Intelligent Zoned Heating, and 16GB EMMC storage.
5. Bakım
Regular maintenance ensures the longevity and optimal performance of your FLSUN S1 Pro 3D Printer.
- Temizlik: Regularly clean the print bed, nozzle, and internal components to prevent debris buildup. Use a soft cloth and appropriate cleaning solutions.
- Hava Filtresi: The printer is equipped with a combined HEPA + activated carbon air filter. Check and replace the filter periodically as needed to maintain air quality and prevent odors.
- Filament Dryer Box: Ensure the filament dryer box is functioning correctly to keep your filament dry, which is crucial for print quality.
- Nozul Denetimi: Periodically inspect the 0.4mm hardened steel nozzle for wear or clogs. Replace if necessary. The all-metal hot end can reach up to 350°C, supporting various high-temperature filaments.
- Yağlama: Refer to the detailed manual for any lubrication requirements for moving parts.
Image 5.1: Diagram illustrating the 350°C hotend, 50°C chamber, and 120°C hot bed for optimal material handling.
6. Sorun Giderme
Bu bölümde, işletim sırasında karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Baskı Yatağa Yapışmıyor | Improper bed leveling, dirty print surface, incorrect bed temperature. | Re-run auto-leveling. Clean the print surface with isopropyl alcohol. Adjust hot bed temperature according to filament type (Max 120°C). |
| Filament Tıkanması | Dust in filament, incorrect hotend temperature, worn nozzle, heat creep. | Ensure filament is dry (use filament dryer). Verify hotend temperature (Max 350°C). Clean or replace nozzle. Check cooling fan operation. |
| "Spaghetti" Prints | Poor bed adhesion, model detaching, extrusion issues. | The S1 Pro features Spagetti Algılama. Ensure proper bed adhesion. Monitor print progress via the built-in camera. |
| Yazıcı Yanıt Vermiyor | Software glitch, loose connection, power issue. | Restart the printer. Check all cable connections. Ensure stable power supply. |
| Kötü Baskı Kalitesi | Incorrect slicing settings, worn nozzle, vibration, wet filament. | Optimize slicing parameters. Replace nozzle if worn. The printer has Titreşim Telafisi; ensure it's active. Use filament dryer. |
Image 6.1: Features like the 55dB quiet fan and Power Off Resume Print (UPS) contribute to a reliable printing experience.
7. Teknik Özellikler
| Kategori | Şartname | Detaylar |
|---|---|---|
| Genel | Maksimum Baskı Hızı | 1200mm/s |
| Maks Hızlanma | 40000mm/s² | |
| Tepe Akış Hızı | 110 mm³/s | |
| Hacim Oluştur | Φ320*320*430 mm³ (Maximum height of the cylinder: 383mm) | |
| Oda | Kapalı | |
| Gürültü Seviyesi | 55dB | |
| Takım Başlığı | Nozul | 0.4mm Hardened Steel Nozzle (supports various nozzle sizes) |
| Max Hot End Temp | 350℃ | |
| Filament Çapı | 1.75mm | |
| Filament | Desteklenen Filament | Ideal: PLA, PETG, TPU. Satisfactory: ABS, ASA, PA, PC, PET. Capable: Carbon/Glass Fiber Reinforced PLA, PPS-CF, PPA-CF/GF. |
| Active Heating Dry Box | Evet | |
| Filament Tıkanıklığının Tespiti | Evet | |
| Heatbed | Plaka Yap | Dokulu PEI Plaka |
| Max Build Plate Temp | 120℃ | |
| Akıllı Bölge Isıtma | Inner Circle Ø220mm, Outer Ring 220-320mm | |
| Elektronik | Görüntülemek | 7" Color Touch Screen |
| Depolamak | 16GB EMMC, 32GB USB Flash | |
| Güç Kaynağı | 110-240V, 50/60Hz | |
| Açık modda Güç Tüketimi | 400 watt | |
| Yazılım | Yazılım Yükseltmesi | OTA (Kablosuz) |
| Dilimleme Yazılımı | FLSUN Slicer V2.0, Other Slicers | |
| Desteklenen İşletim Sistemi | MacOS, Windows | |
| Özellikler | İzleme Kamerası | Realtime, Timelapse |
| Filament Algılama | Evet | |
| Titreşim Telafisi | Evet | |
| Enkaz Tespiti | Evet | |
| Spagetti Algılama | Evet | |
| Screen Auto Sleep | Evet | |
| Printer Auto Power Off | Evet | |
| Otomatik Tesviye | Evet | |
| Güç Kaybının Kurtarılması | Yes (Z lift, Backup Battery) | |
| Hava Filtresi | HEPA + Activated Carbon | |
| Fiziksel Boyutlar | Ürün Boyutları (D x G x Y) | Yaklaşık 600 mm x 870 mm x 240 mm (23.62"D x 34.25"G x 9.45"Y) |
| Physical Dimension (Printer) | 550*596*1030mm | |
| Ürün Ağırlığı | 113 pound (yaklaşık 51.2 kg) | |
| Renk | Siyah |
Image 7.1: Comprehensive technical specifications for the FLSUN S1 Pro 3D Printer.
8. Garanti ve Destek
FLSUN is committed to providing reliable products and excellent customer service.
- İade: The product is eligible for 30-day easy returns. Please refer to the retailer's return policy for specific details.
- Müşteri Desteği: For technical assistance, troubleshooting, or warranty inquiries, please contact FLSUN Customer Support. You can often find support resources and contact information on the official FLSUN website veya ürünün satın alındığı perakendeci aracılığıyla.
- Koruma Planları: Extended protection plans, such as a 4-Year Protection Plan, may be available for purchase separately to provide additional coverage beyond the standard warranty.
- Çevrimiçi Kaynaklar: Ziyaret edin FLSUN Store on Amazon Ek ürün bilgileri, SSS ve destek için.
