PowMr 3000W 24V - 110/120V AC Güneş Enerjisi İnverteri Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and efficient operation of your PowMr 3000W 24V to 110/120V AC Off-Grid Pure Sine Wave Solar Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference.

1.1 Paket İçeriği

Paketi açtığınızda lütfen aşağıda listelenen tüm öğelerin mevcut ve hasarsız olduğundan emin olun:

• PowMr Solar Inverter (Model: POW-LVM3K-24V-H)
• Kullanıcı Kılavuzu
• Kurulum Kılavuzu Kartı
• Garanti Kartı
• Screw Accessories Set
• 2 x Terminal

Text Description: The package includes the main inverter unit, a user manual, an installation guide, a warranty card, a set of screws for mounting, and two electrical terminals for connections.

Video Description: This video demonstrates the unboxing of the PowMr Solar Inverter, showing the main unit and all included accessories such as the user manual, terminals, and screws.

1.2 Ürün Üzeriview

The PowMr POW-LVM3K-24V-H is an all-in-one solar inverter designed for off-grid applications. It integrates an inverter, an 80A MPPT solar charger, and a battery charger into a single unit. Key features include:

• Pure Sine Wave AC Output: Provides stable 110V/120V AC power up to 3000W.
• 24V Battery Compatibility: Supports both lead-acid (sealed, AGM, Gel, Flooded) and lithium batteries.
• Wide PV Input Range: Accepts photovoltaic input voltage from 120V to 450V DC, with a maximum PV input power of 4000W. A starting voltage greater than 150V is required.
• 80A MPPT Charge Controller: Maximizes solar power harvesting efficiency.
• Multiple Operating Modes: Features four charging modes (PV Priority, Utility Priority, Hybrid, Solar-Only) and three load output working modes (PV Priority, Utility Priority, Inverter Mode).
• Lithium Battery Activation: Includes a built-in function for activating lithium batteries.
• Comprehensive Protection: Equipped with short-circuit, over/under voltage, overload, and reverse polarity protection to ensure system safety and stability.
• User Interface: LCD display and three LED indicators provide dynamic system data and operating status.

Text Description: An image highlighting the key features of the PowMr 3000W Off-Grid Solar Inverter, including its 24V DC to 110/120V AC output, built-in 80A MPPT controller, maximum PV open circuit voltage of 450V, maximum PV input of 4000W, starting voltage requirement, 4 charging modes, 2 output modes, and support for utility, generator, and solar charging.

2. Güvenlik Bilgileri

Please observe the following safety precautions to prevent injury and damage to the inverter or connected equipment:

• Kalifiye Personel: Montaj ve bakım işlemleri sadece kalifiye personel tarafından yapılmalıdır.
• Güç Bağlantısının Kesilmesi: Always disconnect all power sources (AC, DC, and battery) before performing any wiring or maintenance.
• Havalandırma: Aşırı ısınmayı önlemek için invertörün etrafında yeterli havalandırma olduğundan emin olun.
• Çevre: İnverteri kuru, serin ve tozsuz bir ortamda, yanıcı maddelerden uzakta kurun.
• Topraklama: Doğru topraklama güvenlik için çok önemlidir. İnverterin doğru şekilde topraklanmış olduğundan emin olun.
• Pil Güvenliği: Work with batteries carefully. Wear eye protection and avoid contact with battery acid. Ensure batteries are properly sized and connected.
• Cilttage Hazards: İnverter yüksek volümde çalışırtages. Do not touch uninsulated terminals or components.

3. Kurulum ve Kurulum

Careful installation is crucial for the performance and safety of your solar inverter. Refer to the included Installation Guide Card for detailed, step-by-step instructions.

3.1 Bileşen Tanımlama

İnverterin bağlantı noktalarını ve göstergelerini tanıyın:

Text Description: An image illustrating the various ports and indicators on the PowMr Solar Inverter. Key components include AC input/output ports, CAN/USB/RS485 communication ports, dry contact port, grounding screw hole, overload protector, battery port, cooling fan, ON/OFF rocker switch, PV port, touch keys, LED indicators, and LCD screen.

1. AC Giriş Bağlantı Noktası
2. AC Çıkış Bağlantı Noktası
3. CAN İletişim Bağlantı Noktası
4. USB İletişim Portu
5. RS485 Haberleşme Portu
6. Kuru Kontak Portu
7. Grounding Screw Hole
8. Aşırı yük koruyucusu
9. Pil Bağlantı Noktası
10. Soğutma Fanı
11. AÇMA/KAPAMA Basmalı Anahtar
12. PV Bağlantı Noktası
13. Touch Keys (SET, UP, DOWN, ENT)
14. LED Göstergeleri
15. LCD Ekran

3.2 Kablolama Şeması

The following diagram illustrates the typical wiring connections for the inverter. Ensure all connections are secure and follow local electrical codes.

Text Description: A detailed wiring diagram for the PowMr Solar Inverter, showing connections for solar panels (PV input), battery, AC input (from generator or utility), and AC output (to household loads). It specifies wire gauges, voltage requirements, and emphasizes connecting the PE protective conductor to ground first.

3.2.1 Güneş Paneli Bağlantısı

• Connect solar panels in series to achieve a total open circuit voltage between 120V and 450V DC. The starting voltage 150V'tan büyük olmalıdır.
• A minimum of 4-6 solar panels are typically needed to initiate inverter operation, depending on individual panel specifications.
• Ensure the maximum PV input power does not exceed 4000W and the maximum input current is 13A.
• Use 12AWG wire for PV connections.

3.2.2 Akü Bağlantısı

• Connect a 24V battery bank (lithium or lead-acid) to the battery terminals.
• A recommended battery capacity is 200Ah.
• Use 2AWG wire for battery connections.
• Doğru kutupluluğu sağlayın (+ ile + ve - ile -).

Text Description: An image showing the compatibility of the PowMr Solar Inverter with various 24V battery types, including AGM, GEL, FLD (Flooded), LI (Lithium), and SLD (Sealed Lead-Acid).

3.2.3 AC Giriş/Çıkış Bağlantısı

• Connect the AC input from a utility grid or generator (120Vac, 50/60Hz) to the AC input port.
• Connect your AC loads (e.g., refrigerators, lamps, TVs) to the AC output port. The rated output power is 3000W at 120Vac.
• Use 10AWG wire for AC connections.
• Always connect the PE (Protective Earth) conductor to ground first.

4. Kullanım Talimatları

The inverter features an LCD display and LED indicators for monitoring, and touch keys for configuration.

4.1 Açma/Kapatma

1. Tüm kablo bağlantılarının doğru ve güvenli olduğundan emin olun.
2. Akü şalterini açın.
3. Turn on the PV input breaker (if applicable).
4. Flip the ON/OFF rocker switch on the inverter to the 'ON' position.
5. The LCD display will illuminate, and the inverter will begin its startup sequence.
6. To power off, reverse the sequence: turn off the inverter, then PV, then battery.

4.2 LCD Ekran ve LED Göstergeler

The LCD screen provides real-time system data, while the three LED indicators (AC/INV, CHARGE, FAULT) show the operational status.

• AC/INV LED: Indicates AC input status or inverter output.
• ŞARJ LED'i: Pil şarj durumunu gösterir.
• ARIZA LED'İ: Illuminates in case of system errors or faults.

4.3 Şarj Modu

İnverter dört farklı şarj modunu destekler:

Text Description: An image detailing the four charging modes (Solar Charging, Electricity Utility Priority, Solar Priority, Hybrid Charging) and three load output working modes (PV Priority, Utility Priority, Inverter Mode) available on the PowMr Solar Inverter.

1. Güneş Şarjı: Pil şarjı için güneş enerjisine öncelik verir.
2. Elektrik Dağıtım Şirketinin Önceliği: Prioritizes utility power for battery charging.
3. Güneş Enerjisine Öncelik: Öncelikle güneş enerjisini kullanır, güneş enerjisi yetersiz kalırsa şebeke elektriğini kullanır.
4. Hibrit Şarj: Combines solar and utility power for charging.

4.4 Yük Çıkışı Çalışma Modları

The inverter offers three load output working modes:

1. PV Önceliği: Loads are powered by solar first, then battery, then utility.
2. Hizmet Önceliği: Loads are powered by utility first, then battery, then solar.
3. İnvertör Modu: Loads are powered by the inverter (from battery/solar).

These modes can be configured via the LCD display using the touch keys (SET, UP, DOWN, ENT).

5. Bakım

Düzenli bakım, invertörünüzün optimum performans ve uzun ömürlü olmasını sağlar.

• Temizlik: Periodically clean the inverter's exterior and ventilation openings to prevent dust accumulation. Use a dry cloth.
• Bağlantılar: Tüm elektrik bağlantılarını sıkılık ve korozyon açısından yılda bir kez kontrol edin. Gevşek bağlantıları sıkın.
• Çevre: Kurulum ortamının belirtilen sıcaklık ve nem aralıklarında kalmasını sağlayın.
• Pil Denetimi: Regularly check battery terminals for corrosion and ensure proper electrolyte levels for flooded batteries.

6. Sorun Giderme

If the inverter is not operating as expected, refer to the following common issues. For complex problems or error codes not listed, consult the full user manual or contact customer support.

• Güç Çıkışı Yok: Check battery connections, DC input voltage from solar panels, and AC input from utility/generator. Ensure the inverter is switched ON.
• Şarj Sorunları: PV giriş hacmini doğrulayıntage and current. Check battery type settings on the inverter. Ensure the charging mode is correctly selected.
• Aşırı Yük Uyarısı: Reduce the connected load. The inverter has an overload protector that may trip.
• Arıza Göstergesi Açık: Note any error codes displayed on the LCD and refer to the detailed troubleshooting section in the complete user manual.

7. Özellikler

8. Garanti ve Destek

Your PowMr Solar Inverter comes with a warranty. Please refer to the included Warranty Card for specific terms and conditions, including warranty duration and coverage details. For technical support, troubleshooting assistance, or warranty claims, please contact PowMr customer service through their official channels or the retailer where the product was purchased.