VGR 880C

VGR 880C Professional Cordless Hair Clippers

Kullanıcı Kılavuzu

giriiş

This manual provides essential information for the safe and effective use of your VGR 880C Professional Cordless Hair Clippers. Please read all instructions carefully before first use and retain this manual for future reference.

Güvenlik Bilgileri

Elektrik çarpması, yaralanma veya cihazda hasar riskini azaltmak için, her zaman şu temel güvenlik önlemlerine uyun:

Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

The complete VGR 880C hair cutting kit, including the clipper, charging base, guide combs, oil, brush, and cables, neatly arranged.

Image: The VGR 880C hair cutting kit with all included accessories.

Diagram showing all components included in the VGR 880C package: hair clipper, 10 guide combs, oil, brush, USB cable, Type-C cable, and charging dock.

Image: Visual representation of 'What's Included' with the VGR 880C.

Ürün Özellikleri

Close-up of the VGR 880C hair clipper's ceramic and MIM blades, highlighting their sharpness and precision.

Image: Detail of the ceramic and MIM blades for precise cutting.

Diagram illustrating the VGR 880C's external rotor BLDC motor, emphasizing its high efficiency and low noise operation at 7200 RPM.

Image: External Rotor BLDC Motor for powerful and quiet operation.

Kurmak

  1. Paketi aç: Carefully remove all components from the packaging. Inspect the clipper and accessories for any damage.
  2. Başlangıç ​​ücreti: Before first use, fully charge the clipper. Refer to the 'Charging' section for detailed instructions.
  3. Bıçakları Yağlayın: Apply a few drops of the included lubricating oil to the blades. Turn on the clipper for a few seconds to distribute the oil, then wipe off any excess. This ensures optimal performance and blade longevity.

Kullanım Talimatları

  1. Güç Açma/Kapatma: Tıraş makinesinin ön tarafında bulunan güç düğmesine basarak cihazı açıp kapatabilirsiniz.
  2. Kılavuz Tarakların Takılması: Select the desired guide comb (1.5mm to 25mm). Align the comb with the clipper blade and push it firmly until it clicks into place. Ensure it is securely attached before use.
  3. Adjusting Taper Lever: The taper lever on the side of the clipper allows for fine adjustments to cutting length without a comb, from 0.8mm (fully closed) to 2mm (fully open). Use this for blending and precise detailing.
  4. Saç Kesimi: For best results, use the clipper on clean, dry hair. Start with a longer guide comb than desired and gradually reduce the length. Move the clipper against the direction of hair growth for an even cut.
  5. Removing Guide Combs: Gently pull the comb away from the blade to remove it.
A person using the VGR 880C hair clipper to trim hair on the side of a head, demonstrating its ergonomic design.

Image: VGR 880C in use for hair trimming.

Diagram showing the VGR 880C hair clipper's 5-level adjustable taper lever, indicating cutting lengths from 0.8mm to 2mm without a guide comb.

Image: Taper lever adjustment for precise cutting lengths.

Assortment of 10 color-coded guide combs for the VGR 880C hair clipper, ranging from 1.5mm to 25mm, displayed next to the clipper.

Image: Guide combs for various hair lengths.

Şarj etme

The VGR 880C hair clipper is equipped with a 2500mAh lithium battery, providing up to 150 minutes of cordless operation. A full charge takes approximately 3 hours.

  1. Şarj Yöntemleri: You can charge the clipper directly using the USB or Type-C cable, or by placing it on the included charging dock.
  2. LED Göstergesi: The integrated LED display will show the charging status. It typically indicates battery percentage or a charging animation. Once fully charged, the indicator will show 100% or a steady light.
  3. Güç Kaynağı: Connect the USB or Type-C cable to a compatible USB power adapter (not included) or a computer USB port.
Image of the VGR 880C hair clipper on its charging base, showing USB and Type-C charging ports and an LED indicator for battery status.

Image: VGR 880C charging on its dock with dual charging options.

Diagram showing the USB and Type-C charging options for the VGR 880C hair clipper, highlighting the 2500mAh battery and LED display.

Image: USB charging details and battery information.

Bakım

Regular maintenance ensures the longevity and optimal performance of your VGR 880C hair clipper.

  1. Temizleme Bıçakları: After each use, turn off and unplug the clipper. Use the included cleaning brush to remove loose hairs from the blades. For a more thorough cleaning, the blades can be rinsed under running water (ensure the clipper body remains dry). Allow blades to air dry completely before reattaching or storing.
  2. Bıçakların Yağlanması: After cleaning and drying, apply 1-2 drops of the provided lubricating oil across the top of the blades. Turn on the clipper for a few seconds to distribute the oil evenly. Wipe off any excess oil with a soft cloth. This should be done after every few uses or as needed to maintain smooth operation.
  3. Depolamak: Store the clipper and its accessories in a dry, cool place, away from direct sunlight and moisture. Use the original packaging or a suitable storage case to protect the blades.

Sorun giderme

If you encounter any issues with your VGR 880C hair clipper, refer to the following table for common problems and solutions:

SorunOlası NedenÇözüm
Clipper açılmıyor.Pil bitmiş.Tıraş makinesini tam şarj edin.
Saç kesme makinesi saçları çekiyor veya düzensiz kesiyor.Blades are dull or dirty; insufficient oil; guide comb not properly attached.Clean and oil the blades. Ensure guide comb is securely attached. If blades are dull, consider professional sharpening or replacement.
Clipper alışılmadık bir ses çıkarıyor.Blades require lubrication; foreign object caught in blades.Clean and oil the blades. Inspect for any obstructions and carefully remove them.
Şarj göstergesi çalışmıyor.Charging cable or adapter faulty; poor connection.Check cable and adapter. Ensure secure connection to clipper and power source. Try a different cable or adapter.

Özellikler

ÖzellikDetay
ÖrnekVGR 880C
Bıçak MalzemesiCeramic and MIM (Metal Injection Molding)
Motor TipiExternal Rotor BLDC Motor
Motor Hızı7200 RPM
Pil TürüLityum İyon
Pil Kapasitesi2500mAh
Kablosuz Kullanım Süresi150 dakikaya kadar
Şarj SüresiYaklaşık 3 saat
Şarj ArayüzüUSB, Type-C (via charging dock or direct)
Konik Kol Ayarı0.8 mm - 2 mm
Kılavuz Tarak Uzunlukları1.5 mm, 3 mm, 4.5 mm, 6 mm, 10 mm, 13 mm, 16 mm, 19 mm, 22 mm, 25 mm
Overall Adjustable Cutting Lengths0.8mm - 27mm (with guide combs)
Güç KaynağıPil ile çalışır
ÜreticiVGR
Menşei ülkeÇin

Garanti ve Destek

The VGR 880C Professional Cordless Hair Clippers come with a 1 Yıllık Garanti from the date of purchase, covering manufacturing defects. For technical assistance, product inquiries, or warranty claims, please contact VGR customer support. We aim to provide 24/XNUMX destek to address your needs.

VGR logo with 'NAVIGATOR' text below.Customer support representative with headset, indicating 24-hour support and 1-year warranty.

Image: VGR brand and customer support information.

İlgili Belgeler - 880C

Önview VGR V-063 Hair Trimmer User Manual - Features, Usage, and Maintenance
Comprehensive user manual for the VGR V-063 hair trimmer. Learn about its components, safety warnings, usage instructions, USB charging, cleaning, maintenance, technical specifications, and disposal guidelines.
Önview VGR V-990 Kablosuz Saç Kesme Makinesi Kullanım Kılavuzu
8000 RPM hıza, berber sınıfı performansa ve erkekler için kolay saç kesimi özelliğine sahip VGR V-990 profesyonel kablosuz saç kesme makinesinin kullanımına ilişkin kapsamlı kılavuz.
Önview VGR V-668 Hair Clipper User Manual - Safety and Instructions
Official user manual for the VGR V-668 Hair Clipper. Find important safety information, operating instructions, and charging details for your VGR hair clipper.
Önview VGR V-282 Profesyonel Saç Kesme Makinesi Kullanım Kılavuzu ve Teknik Özellikleri
VGR V-282 Voyager Profesyonel Saç Kesme Makinesi için kapsamlı kullanım kılavuzu. Bileşenler, güvenlik talimatları, kullanım, şarj, bakım, teknik özellikler ve imha talimatları hakkında ayrıntılı bilgiler içerir.
Önview VGR V-906 Profesyonel Saç Kesme Makinesi Kullanım Kılavuzu
VGR V-906 elektrikli saç kesme makinesinin kapsamlı kullanıcı kılavuzu, profesyonel ve evde bakım için ayrıntılı özellikler, çalıştırma, şarj, bakım ve sorun giderme.
Önview VGR V-085 Profesyonel Saç Kesme Makinesi Kullanım Kılavuzu ve Güvenlik Talimatları
Bu belge, VGR V-085 Profesyonel Saç Kesme Makinesi için kapsamlı güvenlik talimatları, bileşen listesi, kullanım yönergeleri, temizlik ve bakım prosedürleri ve teknik özellikler sağlar.