BRITA 1043450

BRITA P1000 3-Way Integrated Water Filtration System

Brand: BRITA | Model: 1043450

giriiş

The BRITA P1000 3-Way Integrated Water Filtration System offers a convenient and sustainable solution for accessing filtered, cold, and hot water directly from a single tap. This system features high-quality BRITA filtration, capable of processing up to 1,200 liters, effectively reducing chlorine, limescale, and other impurities to enhance water taste and protect your appliances. Its premium stainless steel design provides both functionality and an elegant aesthetic for any modern kitchen.

BRITA P1000 3-Way Integrated Water Filtration System with tap and P1000 filter

Image: The BRITA P1000 3-Way Integrated Water Filtration System, showcasing the sleek stainless steel tap and the compact P1000 filter unit.

Güvenlik Bilgileri

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.

  • Herhangi bir kurulum veya bakım işlemine başlamadan önce ana su kaynağını mutlaka kapatın.
  • Ensure all connections are tight to prevent leaks. Check for leaks periodically after installation.
  • This system is designed for use with high-pressure boilers (2-8.6 bar). Do not use with low-pressure systems.
  • Sistemden önce veya sonra yeterli dezenfeksiyon yapılmadan mikrobiyolojik olarak güvenli olmayan veya kalitesi bilinmeyen su ile kullanmayınız.
  • Keep the filter unit away from direct heat sources and freezing temperatures.
  • Only use genuine BRITA replacement filters to ensure optimal performance and safety.

Paket İçeriği

Kurulum işlemine başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

  • BRITA 3-Way Tap (Square Style, Stainless Steel)
  • BRITA P1000 Filter Cartridge
  • Filter Head with Smart Filter Change Indicator (LED)
  • Mounting Accessories (hoses, connectors, seals, etc.)
Installation kit for BRITA 3-Way Integrated Water Filtration System

Image: A selection of tools and components typically included or required for the installation of the BRITA 3-Way Integrated Water Filtration System.

Kurulum ve Yükleme

The BRITA P1000 3-Way Integrated Water Filtration System is designed for easy installation under the sink, fitting most kitchens without the need for countertop drilling or electrical connection. Follow these steps for a successful setup:

  1. Kurulum Alanını Hazırlayın: Ensure you have sufficient space under your sink. The system requires a mounting hole of ø 35 mm and a minimum distance of 60 mm to the rear wall.
  2. Su Kaynağını Kapatın: Locate and turn off the main water supply to your kitchen sink.
  3. Musluğu Monte Edin: Insert the 3-way tap into the designated hole on your countertop. Secure it from underneath using the provided mounting accessories.
  4. Su Hortumlarını Bağlayın: Connect the hot and cold water supply lines to the corresponding inlets on the tap. Connect the filtered water line from the tap to the filter head.
  5. Install the Filter Head: Secure the filter head to the cabinet wall under the sink. Ensure it is easily accessible for filter changes.
  6. Insert the P1000 Filter: Insert the BRITA P1000 filter cartridge into the filter head.
  7. Turn On Water Supply & Flush: Slowly turn the main water supply back on. Open the filtered water tap and let the water run for at least 3 minutes to flush the system and remove any air or carbon fines. Check all connections for leaks.

Görsel kılavuz için lütfen aşağıdaki kurulum videosuna bakın:

Video: Detailed installation guide for the BRITA My Pure water filter tap system, demonstrating step-by-step setup.

Visual aids for installation:

Under-sink installation of BRITA P1000 filter

Image: An illustration showing the BRITA P1000 filter unit installed neatly under a kitchen sink, connected to the tap and water supply lines.

Diagram of under-sink filter connection

Image: A diagram illustrating the connection points of the BRITA filter head and cartridge to the water supply and the 3-way tap under the sink.

BRITA 3-Way Tap dimensions diagram

Image: A technical drawing showing the dimensions of the BRITA 3-Way Tap, including height, width, base ring diameter, and mounting hole size, crucial for planning installation.

Kullanım Talimatları

Your BRITA 3-Way Integrated Water Filtration System provides three types of water: filtered, cold, and hot. The tap features separate levers or controls for each function.

  • Filtrelenmiş Su: Use the dedicated lever (often marked or with a blue indicator) to dispense filtered water.
  • Cold & Hot Water: Use the standard mixer lever to dispense unfiltered cold or hot water, just like a conventional kitchen tap.
  • Smart Filter Change Indicator: The filter head includes an LED indicator that signals when it's time to replace the filter cartridge. Refer to the maintenance section for details on interpreting the indicator.
BRITA 3-Way Tap dispensing filtered and unfiltered water

Image: The BRITA 3-Way Tap demonstrating the simultaneous dispensing of filtered water from one spout and unfiltered cold/hot water from another, highlighting its versatility.

Close-up of BRITA filter change LED indicator

Resim: Yakın çekim view of the BRITA tap's smart filter change indicator, showing the LED light that signals filter status.

Bakım

Regular maintenance ensures optimal performance and longevity of your BRITA P1000 system.

Filtre Kartuşu Değişimi

The BRITA P1000 filter cartridge should be replaced periodically, typically every 6-12 months, or when the smart filter change indicator signals. The indicator light will change color (e.g., green to yellow to red) to prompt replacement.

  1. Turn off the water supply to the filter unit.
  2. Eski filtre kartuşunu filtre başlığından çıkarmak için saat yönünün tersine çevirin.
  3. Insert the new BRITA P1000 filter cartridge into the filter head and twist clockwise until it clicks into place.
  4. Turn the water supply back on and flush the new filter for 3 minutes.
  5. Reset the smart filter change indicator according to its specific instructions (usually by pressing and holding a button).

Temizlik

Clean the exterior of the tap and filter unit regularly with a soft, damp Bez ve yumuşak deterjan kullanın. Cilaya zarar verebilecek aşındırıcı temizleyicilerden veya çözücülerden kaçının.

Sorun giderme

If you encounter any issues with your BRITA P1000 system, refer to the table below for common problems and solutions:

SorunOlası NedenÇözüm
Low water flow from filtered tapTıkalı filtre kartuşuFiltre kartuşunu değiştirin.
Bağlantılardan su sızıntılarıGevşek bağlantılar veya hasarlı contalarTurn off water supply, check and tighten all connections. Replace seals if damaged.
Unpleasant taste/odor in filtered waterExpired filter cartridge or improper flushingReplace filter cartridge and flush thoroughly. Ensure proper installation.
No water from filtered tapWater supply off or filter incorrectly installedCheck main water supply and filter unit connections. Reinstall filter if necessary.

Özellikler

ÖzellikDetay
ÜreticiBRİTA
Model Numarası1043450
Ürün Ağırlığı5.74 kilo
Ürün Boyutları (U x G x Y)22.7x18.1x40 cm
RenkPaslanmaz çelik
StilKare
Güç KaynağıManuel
Kurulum YöntemiKendin Yap (Kendin Yap)
Gerekli Delik Sayısı1
Tutma YeriMerkez
Kol Sayısı2
Sap MalzemesiPaslanmaz çelik
Montaj TipiGüverte Dağı
Özel ÖzelliklerEntegre Su Filtresi
Piller GerekliHAYIR
Kapasite1.2 Liters (Filter)
Arıtma YöntemiKarbon Blok
Menşei ülkeAlmanya

Garanti ve Destek

For warranty information and customer support, please refer to the documentation included with your product or visit the official BRITA webSite. Satın alma belgenizi garanti talepleriniz için saklayın.

Ayrıca ziyaret edebilirsiniz BRITA Store on Amazon Daha fazla ürün ve bilgi için.

İlgili Belgeler - 1043450

Önview BRITA ON TAP and ON TAP Pro Faucet Water Filter User Manual
Comprehensive user manual for BRITA ON TAP and ON TAP Pro faucet water filter systems, covering installation, operation, maintenance, and troubleshooting. Learn about filter replacement, safety notes, and proper disposal.
Önview BRITA ON TAP & ON TAP Pro: Kullanım ve Kurulum Kılavuzu
Daha temiz ve daha taze tada sahip su için BRITA ON TAP ve ON TAP Pro su filtreleme sistemlerinin kurulumu, çalıştırılması, bakımı ve sorun giderme konularını kapsayan kapsamlı kılavuz.
Önview BRITA ON TAP & ON TAP Pro Kurulum ve Kullanım Kılavuzu
Daha temiz ve daha taze tada sahip su elde etmek için BRITA ON TAP ve ON TAP Pro su filtreleme sistemlerinin kurulumu ve kullanımı, özellikleri, bakımı ve sorun giderme konularını kapsayan kapsamlı bir kılavuz.
Önview BRITA AquaAroma Crema Su Filtresi Kartuşu: Kurulum, Kullanım ve Güvenlik Kılavuzu
BRITA AquaAroma Crema su filtresi kartuşu için kurulum, aroma kadranı ayarı, kartuş değişimi, kapasite ve kahve ve espresso makineleri için temel güvenlik talimatlarını kapsayan kapsamlı kılavuz. BRITA'nın dünya çapındaki iletişim bilgilerini de içerir.
Önview BRITA Su Filtre Sürahisi Kullanım Kılavuzu
BRITA MAXTRA PRO su filtreli su arıtma sürahileri için kapsamlı kullanım kılavuzu; kurulum, çalıştırma, bakım ve filtre değişimini ayrıntılı olarak anlatmaktadır. Gelişmiş filtreleme teknolojisi, sürdürülebilirlik ve ürün özellikleri hakkında bilgi edinin.
Önview BRITA Su Filtresi Sürahileri: Kullanım Kılavuzu ve Rehberi
BRITA su filtresi sürahileri için kurulum, kullanım, bakım ve sorun giderme dahil kapsamlı talimatlar ve kılavuzlar. MAXTRA+ filtre teknolojisi, filtre değişim göstergeleri ve optimum performans hakkında bilgi edinin.