giriiş
This manual provides detailed instructions for the installation, usage, and maintenance of the NARWAL Freo S Robot Vacuum Accessories Kit. This kit includes essential replacement parts to ensure your NARWAL Freo S robot vacuum cleaner maintains optimal performance.
Paket İçeriği
Please verify that all items are present in your accessory kit:
- 1 x Rulo Fırça
- 2 x Side Brushes (Left and Right)
- 2 x Filtre

Image: Contents of the NARWAL Freo S Robot Vacuum Accessories Kit.
Kurulum Talimatları
Ensure the robot vacuum is powered off and disconnected from its charging station before performing any installation or replacement procedures.
1. Replacing the Roller Brush
- Turn the robot vacuum upside down on a flat, stable surface.
- Locate the brush guard cover, usually secured by two tabs or screws. Press the tabs or unscrew to remove the cover.
- Lift out the old roller brush.
- Insert the new roller brush, ensuring the square end fits into the corresponding slot and the round end with the bearing clicks into place.
- Replace the brush guard cover and secure it.

Image: Underside of the robot vacuum, illustrating the roller brush area.
2. Yan Fırçaların Değiştirilmesi
- Robot süpürgeyi ters çevirin.
- Yan fırçaları bulun. Bunlar genellikle tek bir vida ile yerinde tutulur.
- Use a screwdriver to remove the screw and detach the old side brush.
- Align the new side brush with the post and secure it with the screw. Ensure the correct brush (L for left, R for right) is installed if marked.

Image: Robot vacuum in operation, showing the side brushes.
3. Filtrelerin Değiştirilmesi
- Open the top cover of the robot vacuum to access the dustbin.
- Robotun çöp kutusunu çıkarın.
- Open the dustbin cover to reveal the filter compartment.
- Eski filtreyi dışarı çekerek çıkarın.
- Insert the new filter into the compartment, ensuring it is seated correctly.
- Close the dustbin cover, reinsert the dustbin into the robot, and close the top cover.

Image: Accessing the dustbin and filter compartment of the robot vacuum.
Usage Guidelines and Replacement Frequency
To maintain optimal cleaning performance and extend the lifespan of your NARWAL Freo S robot vacuum, it is recommended to replace accessories regularly.
- Rulo Fırça: Replace every 6-12 months, or sooner if visible wear or damage occurs.
- Yan Fırçalar: Replace every 3-6 months, or sooner if bristles are bent, worn, or missing.
- Filtreler: Replace every 2-3 months, or more frequently if you have pets or experience high dust levels.
Actual replacement frequency may vary based on usage habits and environment.
Bakım
Regular cleaning of your accessories will help prolong their effectiveness between replacements.
- Rulo Fırça: Remove hair and debris tangled around the brush and its ends weekly. A cleaning tool (often included with the robot) can assist.
- Yan Fırçalar: Check for tangled hair or debris weekly and remove as needed.
- Filtreler: Tap the filter gently over a trash can to remove dust and debris weekly. Do not wash filters with water unless explicitly stated by the manufacturer, as this can damage them.
Sorun giderme
If you encounter issues after replacing accessories, consider the following:
- Brush not spinning: Ensure the roller brush and side brushes are correctly installed and free from obstructions. Check if the brush guard cover is properly secured.
- Azaltılmış emme gücü: A clogged filter is a common cause. Ensure the new filter is clean and properly seated.
- Olağandışı sesler: Check all brushes for tangled hair or foreign objects. Ensure all parts are securely in place.
- Robot error messages: Refer to your main NARWAL Freo S robot vacuum manual for specific error codes. Ensure genuine NARWAL accessories are used.
Özellikler
| Bileşen | Quantity in Kit | Malzeme |
|---|---|---|
| Rulo Fırça | 1 | Plastik, Kıllar |
| Yan Fırçalar | 2 | Plastic, Nylon Bristles |
| Filtreler | 2 | HEPA-type material, Plastic frame |
Model Adı: YJCC023
Marka: NARWAL
Ürün Ölçüleri: Approximately 2.54 x 2.54 x 2.54 cm (individual components vary)
Ürün Ağırlığı: 180 grams (total kit)
Garanti ve Destek
NARWAL accessories are designed for durability and performance. For specific warranty information regarding this accessory kit, please refer to the warranty policy provided with your original NARWAL Freo S robot vacuum or visit the official NARWAL webalan.
For technical support, troubleshooting assistance, or to purchase additional genuine NARWAL accessories, please contact NARWAL customer service or visit their official support channels. Using non-genuine parts may void your robot vacuum's warranty and affect its performance.
NARWAL Official Webalan: www.narwal.com





