FrSky Tandem X18R Radio Controller User Manual

giriiş

This manual provides comprehensive instructions for the setup, operation, and maintenance of your FrSky Tandem X18R Radio Controller. The X18R is a 24-channel radio system featuring a built-in TD-ISRM RS dual-band internal RF module, an 800x480 outdoor high brightness touchscreen, and MC18 high-precision Hall-sensor gimbals. Please read this manual thoroughly before using your device to ensure safe and optimal performance.

Şekil 1: Ön view of the FrSky Tandem X18R Radio Controller.

Güvenlik Önlemleri

• Always ensure the transmitter battery is fully charged before operation.
• Perform a range check before each flight session.
• Operate your radio controller in open areas, away from obstacles, people, and power lines.
• Do not operate the radio controller in adverse weather conditions (rain, strong winds).
• Cihazı su ve nemden uzak tutunuz.
• Only use genuine FrSky replacement parts and accessories.

Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

• FrSky Tandem X18R Radio Controller
• USB-C Kablosu
• Neck Strap (may vary by region)
• Hızlı Başlangıç ​​Kılavuzu

Ürün Bittiview

The FrSky Tandem X18R is designed for precision control and advanced functionality. Key components include:

• 800x480 Touchscreen Display: High-resolution screen for clear visibility and intuitive menu navigation.
• MC18 Hall-Sensor Gimbals: High-precision gimbals with 10 ball-bearings for smooth and accurate control.
• Dual-Band RF Module (TD-ISRM RS): Supports multiple RF modes for low-latency and long-range communication.
• External LoRa Antenna Connectors: For 900M/2.4G frequencies, enhancing signal reliability.
• Customizable Buttons and Switches: 2 knobs and 6 front custom buttons, along with various switches (SA, SB, SC, SD, SE, SF, SG, SH).
• Bağlantı: USB Type-C for data and charging, Micro SD card slot, Training Port, Earphone Port, Smart Port.

Figure 2: Detailed diagram illustrating the front controls and rear ports of the X18R.

Şekil 3: Arka view of the FrSky Tandem X18R, showing the module bay and battery compartment.

Kurmak

1. Pil Kurulumu

The X18R uses an internal battery. To access the battery compartment:

1. Locate the battery cover on the back of the transmitter (refer to Figure 3).
2. Kapağı açmak için mandalı kaydırın.
3. Carefully connect the battery to the designated connector inside the compartment.
4. Place the battery securely and close the cover.

Şekil 4: View of the battery compartment with the cover removed.

Şekil 5: Ör.ample of the internal battery for the X18R.

2. Pilin Şarj Edilmesi

Connect the supplied USB Type-C cable to the USB-C port on the transmitter and to a suitable USB power adapter (not included). The charging indicator will show the charging status.

3. Açma/Kapama

Press and hold the power button located on the front panel to turn the transmitter on or off. The touchscreen will illuminate upon power-on.

4. External Antenna Installation (Optional)

For enhanced 900M/2.4G LoRa mode performance, external antennas can be connected:

1. Locate the external LoRa antenna connectors on the top rear of the transmitter.
2. Carefully screw the external antennas onto the connectors.

Şekil 6: Yakın çekim view of the 900M/2.4G external antenna interfaces.

Kullanım Talimatları

1. Dokunmatik Ekran Navigasyonu

The 800x480 touchscreen allows for intuitive interaction with the operating system. Tap icons to select, swipe to navigate menus, and use the physical buttons (SYS, MDL, DISP, RTN) for quick access to common functions.

2. Gimbal Control

The MC18 Hall-sensor gimbals provide precise control. These gimbals feature 10 ball-bearings for smooth movement. The vertical travel limit switch is adjustable from 45° to 60° range.

Figure 7: Illustration of the MC18 Hall-Effect Joystick with adjustable vertical travel.

3. Switches and Knobs

The X18R is equipped with various switches and two rotary knobs (S1, S2) for auxiliary functions. The switches include:

• Güney Afrika: 3 pozisyon; Kısa Kol
• SB: 3 pozisyon; Uzun Kol
• SC: 3 pozisyon; Uzun Kol
• SD: 3 pozisyon; Kısa Kol
• Türkçe: 3 pozisyon; Kısa Kol
• SF: 2 pozisyon; Uzun Kol
• ÇG: 3 pozisyon; Kısa Kol
• Ş: 2 positions; Momentary, Long Lever

You can customize the function and position of these switches within the HARDWARE menu of the radio's operating system.

4. Internal RF Module (TD-ISRM RS)

The built-in TD-ISRM RS module supports multiple RF modes, providing super low-latency and long-range control. Ensure your receiver is compatible with the selected RF mode. Refer to the receiver's manual for binding procedures.

5. External Module Bay

The X18R includes an external module bay on the rear, allowing for the use of additional RF modules or other compatible accessories.

Figure 8: Close-up of the external module bay.

6. Bağlantı Noktaları

The bottom of the transmitter features several ports:

• Mikro SD Kart Bağlantı Noktası: For expanding storage and firmware updates. (Micro SD card not provided)
• Type-C USB Bağlantı Noktası: For data transmission, system upgrading, reading/writing Micro SD card contents, internal memory access, and charging.
• Training Port: For connecting to another transmitter for training purposes.
• Kulaklık portu: For audio output, including voice speech outputs.
• Akıllı Liman: For firmware upgrades of FrSky S.Port devices.

Figure 9: Illustration of the various connectivity ports.

Bakım

1. Temizlik

Wipe the transmitter with a soft, dry cloth. Do not use solvents or abrasive cleaners. For the touchscreen, use a screen-specific cleaning solution and a microfiber cloth.

2. Ürün Yazılımı Güncellemeleri

FrSky'ın resmi hesabını düzenli olarak kontrol edin. website for the latest firmware updates. Firmware updates can be performed via the USB Type-C port or by loading files onto a Micro SD card and updating through the system menu.

3. Pil Bakımı

To prolong battery life, avoid fully discharging the battery. Store the transmitter in a cool, dry place when not in use for extended periods. Do not expose the battery to extreme temperatures.

Sorun giderme

For further assistance, please visit the official FrSky support websitesine gidin veya müşteri hizmetleriyle iletişime geçin.

Özellikler

• Modeli: Tandem X18R
• Kanallar: 24 Kanal
• Çalışma Hacmitage Aralık: 6.5-8.4V (2S Li-Po)
• Çalışma Akımı: 240mA@7.4V (tip)
• Görüntülemek: 800x480 Color Touchscreen
• Dahili RF Modülü: TD-ISRM RS Çift Bant (900M/2.4G)
• Gimballer: MC18 All CNC High-Precision Hall-Sensor with 10 Ball-Bearings
• Flash Storage: 512MB
• Sensörler: 6 eksenli Jiroskop
• Uyarılar: Dokunsal Titreşim, Sesli Konuşma Çıkışları
• Bağlantı: USB Type-C, Micro SD Card Slot, Training Port, Earphone Port, Smart Port, External LoRa Antenna Connectors (900M/2.4G)
• Boyutlar: Approximately 3 x 3 x 3 inches (Note: This dimension is typically for packaging; actual product dimensions may vary.)

Garanti ve Destek

FrSky products are typically covered by a limited warranty against manufacturing defects. Please refer to the warranty card included with your product or visit the official FrSky website for detailed warranty terms and conditions. For technical support, firmware downloads, and FAQs, please visit the FrSky support page:

Resmi FrSky Webalan: www.frsky-rc.com