GAMDIAS Aura GC10m V2 WH Mikro-Kule Bilgisayar Kasası Kullanım Kılavuzu

giriiş

The GAMDIAS Aura GC10m V2 WH is a micro-tower computer case designed for Micro-ATX and Mini-ITX motherboards. It features a dual-chamber design, panoramic tempered glass panels, and comes equipped with three Addressable RGB (ARGB) fans to enhance system aesthetics and cooling. This manual provides essential information for the proper installation, operation, and maintenance of your computer case.

Resim: Ön view of the GAMDIAS Aura GC10m V2 WH Micro-Tower Computer Case, showcasing its tempered glass panels and pre-installed ARGB fans.

Kurulum ve Yükleme

Kurulum işlemine başlamadan önce, gerekli tüm bileşenlere ve aletlere sahip olduğunuzdan emin olun. Kurulum talimatları için anakartınızın ve bileşenlerinizin kılavuzlarına bakın.

1. Davayı Hazırlama

Carefully remove the tempered glass side and front panels. These are typically secured with thumbscrews or a latch mechanism. Place them on a soft, flat surface to prevent scratches.

Resim: Açısal view of the case with the tempered glass side panel removed, showing the internal structure and fan mounts.

2. Anakart Kurulumu

• G/Ç kalkanını (anakartınıza önceden takılı değilse) kasanın arka açıklığına takın.
• Micro-ATX veya Mini-ITX anakartınızı kasanın içindeki destek ayaklarıyla hizalayın.
• Verilen vidaları kullanarak anakartı sabitleyin.

Resim: Dahili view of the case, highlighting the motherboard tray area and fan mounting points.

3. Güç Kaynağı Ünitesi (PSU) Kurulumu

• Install your PSU into its designated compartment, typically at the rear bottom of the case.
• PSU'yu kasanın arkasından vidalarla sabitleyin.
• Ensure the PSU fan faces the correct direction for optimal airflow (usually downwards if there's a vent, or upwards if not).

Image: Rear internal view of the case, showing the PSU mounting area and cable routing options.

4. Sürücü Kurulumu

• 3.5" / 2.5" Drive Bay (HDD Cage): Locate the HDD cage. Install one 3.5" HDD or one 2.5" SSD/HDD.
• 2.5" Drive Bays: The case supports three additional 2.5" SSDs/HDDs. Mount these drives to the designated brackets or locations within the case.

5. Fan ve Radyatör Montajı

The case comes with three pre-installed ARGB fans (two side, one rear). Additional fans or radiators can be installed in the following locations:

• Tepe: Supports 3 x 120mm or 2 x 140mm fans; 360mm or 280mm radiators.
• Taraf: Supports 2 x 120mm or 2 x 140mm fans; 240mm radiators. (Pre-installed 2 x 120mm ARGB fans)
• Alt: 3 adet 120 mm veya 2 adet 140 mm fanı destekler.
• Arka: Supports 1 x 120mm or 1 x 140mm fan; 120mm radiators. (Pre-installed 1 x 120mm ARGB fan)

Resim: Dahili view showing the pre-installed ARGB fans on the side and rear, illustrating fan placement.

6. Connecting Front I/O Ports and ARGB

Connect the following cables from the case to your motherboard:

• USB 2.0: Connect the USB 2.0 header cable.
• Tip-C: Connect the USB Type-C header cable (if your motherboard supports it).
• HD Ses: Connect the HD Audio header cable.
• Güç/Sıfırlama/LED'ler: Connect the front panel power, reset, HDD LED, and power LED cables according to your motherboard manual.
• ARGB Hayranları: Connect the ARGB fan cables to your motherboard's 5V ARGB header or to the integrated ARGB controller (if applicable). The case includes an LED Switch Button for controlling ARGB lighting if connected to the case's internal controller.

Resim: Üst view of the case, showing the front I/O panel with USB ports and the LED switch button.

Operasyon

Güç Açık

Once all components are installed and connected, close the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel of the case to start your system.

ARGB Aydınlatma Kontrolü

The pre-installed ARGB fans can be controlled in two ways:

• LED Anahtar Düğmesi: If the ARGB fans are connected to the case's internal controller, press the dedicated LED Switch Button on the front I/O panel to cycle through various lighting effects and colors.
• Anakart Yazılımı: If the ARGB fans are connected directly to a compatible 5V ARGB header on your motherboard, you can control the lighting effects using your motherboard's proprietary RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).

Bakım

Düzenli bakım, bilgisayar bileşenlerinizin optimum performans göstermesini ve uzun ömürlü olmasını sağlamaya yardımcı olur.

• Toz Filtreleri: The case features removable dust filters (e.g., on the top and bottom). Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Kasa Temizleme: Yumuşak bir d kullanınamp cloth to clean the exterior surfaces of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth. Avoid abrasive cleaners.
• İç Toz Giderme: Every few months, open the case and use compressed air to remove dust from internal components, especially fan blades and heatsinks.

Sorun giderme

Sorunlarla karşılaşırsanız, aşağıdaki yaygın çözümleri göz önünde bulundurun:

• Sistem Açılmıyor:
  • Güç kaynağının açık olduğundan ve duvar prizine doğru şekilde bağlı olduğundan emin olun.
  • Tüm güç kablolarının (24 pinli ATX, CPU, GPU, sürücüler) güvenli bir şekilde bağlı olduğundan emin olun.
  • Ön panel güç düğmesi kablosunun anakarta doğru şekilde bağlı olduğundan emin olun.
• ARGB Fans Not Lighting Up/Spinning:
  • Confirm ARGB cables are securely connected to a 5V ARGB header on the motherboard or the case's controller.
  • Ensure fan power cables are connected to appropriate fan headers on the motherboard or PSU.
  • If using motherboard software, verify it is installed and configured correctly.
• Ön Giriş/Çıkış Portları Çalışmıyor:
  • Check that the USB and HD Audio cables from the front panel are correctly connected to their respective headers on the motherboard.

For persistent issues, consult your motherboard manual or contact GAMDIAS support.

Özellikler

Garanti Bilgileri

For detailed warranty terms and conditions, please refer to the official GAMDIAS webSatın alma belgenizi veya ürününüzle birlikte verilen garanti belgesini saklayın. Garanti talepleriniz için satın alma belgenizi saklayın.

Müşteri Desteği

If you require further assistance or have questions regarding your GAMDIAS Aura GC10m V2 WH computer case, please contact GAMDIAS customer support.

• Üretici: GAMDIAS TAIWAN
• Adres: No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
• İthalatçı (Hindistan): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi , Bengaluru- 560004
• İthalatçı İletişim Bilgileri (Hindistan): 8904307700
• Resmi Webalan: www.gamdias.com (Lütfen resmi bilgileri kontrol edin) website for the most up-to-date support contact information and resources.)