1. Giriş
This manual provides detailed instructions for the installation, operation, and maintenance of your Cooler Master Elite 481 Wood Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe usage. Keep this manual for future reference.
Resim 1.1: Ön view of the Cooler Master Elite 481 Wood Computer Case.
2. Güvenlik Bilgileri
- Always disconnect the power supply from the wall outlet before installing or servicing any components inside the computer case.
- Avoid exposing the case to moisture, dust, or extreme temperatures.
- Temperli cam panelleri dikkatli kullanın. Kırılgandırlar ve düşürüldüklerinde veya darbe aldıklarında kırılabilirler.
- Ensure all cables are routed properly and secured to prevent interference with fans or other moving parts.
- Kasanın veya bileşenlerinin değiştirilmesine kalkışmayın, çünkü bu garantinizi geçersiz kılabilir ve güvenlik riski oluşturabilir.
3. Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:
- Cooler Master Elite 481 Wood Computer Case
- Aksesuar kutusu (vidalar, ara parçalar, kablo bağları vb.)
- 3 x Pre-installed ARGB Fans (2 reverse-blade side intake, 1 rear exhaust)
- Kullanım Kılavuzu (bu belge)
4. Kurulum ve Kurulum
4.1 Davanın Hazırlanması
Carefully remove the case from its packaging. Place it on a stable, flat surface. Remove the tempered glass side panels by unscrewing the retaining screws and gently sliding them off. Store them safely to prevent damage.
Image 4.1: The case features dual tempered glass panels for a panoramic view.
4.2 Anakart Kurulumu
The Elite 481 Wood supports mATX motherboards. Install the necessary standoffs for your motherboard form factor. Carefully place your motherboard into the case, aligning it with the standoffs, and secure it with screws.
4.3 Güç Kaynağı Ünitesi (PSU) Kurulumu
The case features a top-mounted PSU chamber in the right compartment. Install your PSU into this designated area and secure it with screws. Route the necessary power cables through the cable management cutouts.
4.4 Depolama Sürücüsü Kurulumu
Utilize the available mounting points for 2.5-inch SSDs and 3.5-inch HDDs. Secure drives using the provided screws or tool-less mechanisms where applicable.
4.5 Grafik Kartı (GPU) Kurulumu
The case supports GPUs up to 410mm in length. Remove the necessary PCIe slot covers, insert your graphics card into the PCIe slot on your motherboard, and secure it with the retaining clip and screw.
Image 4.2: The case accommodates large graphics cards up to 410mm.
4.6 Cooling System Installation (Fans & Radiators)
The Elite 481 Wood supports up to 9 fans and offers extensive radiator support:
- Önceden yüklenmiş Fanlar: 2 x 120mm reverse-blade ARGB fans (side intake), 1 x 120mm ARGB fan (rear exhaust).
- Radyatör Desteği: Dual 360mm radiators (top and bottom), and a 280mm side radiator.
Install additional fans or radiators as needed, ensuring proper airflow direction for optimal cooling.
Image 4.3: Vertical cooling configuration with multiple fan mounts and radiator support.
4.7 Kablo Yönetimi
The dual-chamber architecture provides 95mm of cable management space in the right chamber. Utilize the cable cutouts and included cable ties to route and secure cables neatly, ensuring unobstructed airflow and a clean build appearance.
4.8 Connecting Front I/O Panel
Connect the front I/O panel cables (USB 3.0, USB 3.2 Gen 2x2 Type-C, audio, power, reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.
Image 4.4: The upgraded high-speed I/O panel features USB 3.2 Gen 2x2 Type-C and dual USB 3.0 ports.
5. Kullanım Talimatları
5.1 Açma/Kapatma
Press the power button on the front I/O panel to turn your system on or off. A short press typically powers on, while a longer press (usually 4-5 seconds) will force a shutdown.
5.2 ARGB Fan Kontrolü
The pre-installed ARGB fans are compatible with major motherboard ARGB software for synchronized lighting control. Connect the fan ARGB cables to your motherboard's 3-pin 5V ARGB header. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting effects.
Image 5.1: Pre-installed ARGB fans with motherboard sync support.
6. Bakım
- Toz Filtreleri: The case features mesh panels on the top and bottom for ventilation. Regularly clean these dust filters to maintain optimal airflow and prevent dust buildup inside the system. Dust filters can typically be removed, cleaned with compressed air or water, and reinstalled.
- Dış Temizlik: Dış yüzeyleri yumuşak, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish or the wood panel.
- İç Temizlik: Periodically use compressed air to remove dust from internal components, especially fan blades and heatsinks. Ensure the system is powered off and unplugged before cleaning.
7. Sorun Giderme
- Sistem Açılmıyor:
- Check if the power supply is properly connected to the wall outlet and the PSU switch is in the 'ON' position.
- Güç kaynağı ünitesinden gelen tüm güç kablolarının anakarta ve bileşenlere güvenli bir şekilde bağlı olduğundan emin olun.
- Ön panel güç düğmesi kablosunun anakartın güç girişine doğru şekilde bağlı olduğundan emin olun.
- Fanlar dönmüyor/ARGB çalışmıyor:
- Check if fan power cables are securely connected to the motherboard or fan controller.
- Ensure ARGB cables are connected to a compatible 3-pin 5V ARGB header on the motherboard.
- Confirm that ARGB software is installed and configured correctly on your operating system.
- Yüksek Sıcaklıklar:
- Verify that all case fans are spinning and oriented correctly for optimal airflow (bottom-to-top is recommended for this case).
- Clean any dust buildup on filters, fans, and heatsinks.
- Ensure proper thermal paste application on CPU cooler.
8. Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | E481-KHNN-S00 |
| Marka | Soğutucu Ustası |
| Dava Türü | Orta kule |
| Anakart Uyumluluğu | Mikro ATX |
| Renk | Siyah |
| Boyutlar (U x G x Y) | 53.1x54.4x26.1 cm |
| Ürün Ağırlığı | 13 kilo |
| GPU Açıklığı | 410mm'ye kadar |
| Radyatör Desteği | Üst: 360 mm, Alt: 360 mm, Yan: 280 mm |
| Önceden yüklenmiş Fanlar | 3 x ARGB (2x side intake, 1x rear exhaust) |
| G/Ç Bağlantı Noktaları | 2 x USB 3.0 Type-A, 1 x USB 3.2 Gen 2x2 Type-C |
| Kablo Yönetim Alanı | 95mm |
9. Garanti Bilgileri
Cooler Master products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Cooler Master webSite. Satın alma belgenizi garanti talepleriniz için saklayın.
10. Destek
For technical support, product inquiries, or assistance with installation, please visit the official Cooler Master support website or contact their customer service department. You can find contact information and FAQs on their webalan.
Cooler Master Resmi Webalan: www.coolermaster.com
