ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Giriş

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Resim 1.1: Ön view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Güvenlik Bilgileri

Yangın, elektrik çarpması veya kişisel yaralanma riskini azaltmak için her zaman şu temel güvenlik önlemlerine uyun:

• UYARI: Elektrik Çarpması Riski. Montajdan veya servisten önce sigorta veya devre kesicideki gücü kesin.
• Bu ürün, ürünün yapısı ve işletimi ile ilgili tehlikeleri bilen bir kişi tarafından geçerli kurulum koduna uygun olarak kurulmalıdır.
• Use only 120V AC, 60Hz circuits.
• Cihazı sökmeye veya üzerinde değişiklik yapmaya çalışmayın. İçinde kullanıcı tarafından onarılabilecek hiçbir parça bulunmamaktadır.
• Tüm bağlantıların güvenli ve düzgün bir şekilde yalıtıldığından emin olun.
• Bu armatür yalnızca iç mekanda kullanıma uygundur.

3. Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Montaj Donanımı (vidalar, kablo bağlantı somunları)
• E26 Adapter Accessories (for recessed can installation)
• Kullanım Kılavuzu (bu belge)

Resim 3.1: Kurulum için gerekli aksesuarlar.

4. Ürün Özellikleri

• 3CCT Selectable: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Hareket Sensörü: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Ayarlanabilir Zaman Gecikmesi: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Işık Sensörü: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Enerji Verimliliği: 16W LED provides 1000 lumens of brightness.
• Çok Yönlü Kurulum: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Kurulum ve Kurulum

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Lensi saat yönünde çevirerek çıkarın.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Lensi saat yönünde çevirerek çıkarın.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Kullanım Talimatları

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Hareket Sensörü İşlevselliği

• Gündüz: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Gücün kapalı olduğundan emin olun.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Gücün kapalı olduğundan emin olun.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Bakım

The ECOELER LED ceiling light requires minimal maintenance.

• Temizlik: Temizlemeden önce elektriğin kapalı olduğundan emin olun. Armatürü yumuşak, kuru veya hafif nemli bir bezle silin.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Mercek: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Sorun Giderme

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Özellikler

10. Garanti ve Destek

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webalan.

Üretici: ECOELER ELECTRIC INC