1. Ürün Bittiview
The Waveshare Industrial 8-Channel ESP32-S3 WiFi Relay Module is a high-performance control unit designed for industrial automation and IoT applications. It integrates an ESP32-S3 microcontroller, offering robust wireless communication capabilities (Wi-Fi and Bluetooth LE), multiple isolation protection circuits, and versatile connectivity options including isolated RS485 and an Ethernet port with optional Power over Ethernet (PoE).
This module features 8 high-quality relays and 8 digital inputs, making it suitable for controlling various devices and monitoring industrial signals. Its design emphasizes reliability and safety in demanding environments.
2. Temel Özellikler
- ESP32-S3 Microcontroller: Equipped with an Xtensa 32-bit LX7 dual-core processor, operating at up to 240 MHz for efficient processing.
- Kablosuz bağlantı: Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode communication for flexible network integration.
- 8-Channel Relays: High-quality relays with a contact rating of ≤10A 250V AC / 30V DC, suitable for various loads.
- 8-Channel Digital Inputs: Supports both passive (dry contact) and active (wet contact) digital inputs with bi-directional optocoupler isolation.
- Isolated RS485 Interface: For reliable connection to Modbus industrial modules or sensors, featuring hardware automatic control and protection circuits (TVS diode, surge protection, ESD protection).
- Ethernet Bağlantı Noktası: Onboard W5500 Ethernet chip for 10/100Mbps network communication.
- Ethernet Üzerinden Güç (PoE): Optional version supports IEEE 802.3af standard for combined power and data over a single Ethernet cable.
- Esnek Güç Girişi: Supports USB Type-C (5V) for power, debugging, and firmware, and a wide 7-36V DC screw terminal input for industrial applications.
- RTC Çipi: Onboard Real-Time Clock for scheduled tasks and time-sensitive operations.
- Multiple Isolation Protection: Includes optocoupler isolation, power isolation, and digital isolation to prevent interference and ensure stable operation.
- Durum Göstergeleri: Built-in RGB LED, PWR, TXD, and RXD indicators for monitoring device status.
- Ek: Rail-mounted ABS protective case for easy installation and enhanced safety.
3. Paket İçeriği
Paketi açtığınızda tüm ürünlerin mevcut ve iyi durumda olduğundan emin olun.
- ESP32-S3-POE-ETH-8DI-8RO Module x 1
- 2.4G 4dBi SMA Antenna x 1
- Tornavida x 1
4. Kurulum ve Kurulum
4.1 Güç Kaynağı Bağlantısı
Bu modül, birden fazla güç giriş yöntemini destekler:
- USB Tip-C: Connect a 5V USB power source to the USB Type-C port for power, debugging, and firmware uploading.
- Vidalı terminal: Connect a 7-36V DC power supply to the designated screw terminals. Ensure correct polarity.
- Ethernet Üzerinden Güç (PoE): For the PoE version, connect an 802.3af compliant PoE switch or router to the Ethernet port. This provides both power and network connectivity through a single cable.
4.2 Ağ Bağlantısı
- Wifi: Attach the provided 2.4G SMA antenna to the external antenna connector. Configure Wi-Fi settings via firmware.
- Bluetooth LE'si: The module supports Bluetooth LE for short-range wireless communication.
- Ethernet: Connect a standard Ethernet cable to the RJ45 port for wired network access.
4.3 Röle Bağlantıları
The module provides 8 relay channels. Each relay has Normally Open (NO) and Common (COM) contacts. Refer to the diagram for wiring examples.
4.4 Digital Input Connections
The 8 digital inputs support both passive (dry contact) and active (wet contact) signals. Ensure proper wiring based on the sensor type.
4.5 RS485 Arayüzü
Connect RS485 devices (e.g., Modbus modules, sensors) to the isolated RS485 screw terminals. The interface features hardware automatic control for data direction and includes protection circuits.
4.6 Enclosure and Mounting
The module is housed in a rail-mounted ABS protective case, designed for easy installation in industrial control cabinets using a 35mm DIN rail.
5. Kullanım Talimatları
5.1 İlk Çalıştırma ve Yapılandırma
After connecting the power supply, the PWR LED should illuminate. The module can be configured via its Wi-Fi interface (AP mode), Ethernet, or through a serial connection via the USB Type-C port. Refer to the Waveshare Wiki for detailed programming and configuration guides.
5.2 Röle Kontrolü
The 8 relays can be controlled programmatically via the ESP32-S3 microcontroller. This allows for switching AC or DC loads based on logic defined in the firmware.
5.3 Digital Input Monitoring
Monitor the status of the 8 digital inputs to detect external events from sensors, switches, or other industrial signals. The bi-directional optocoupler isolation ensures signal integrity and protection.
5.4 RS485 İletişimi
Utilize the isolated RS485 interface for communication with other industrial devices, typically using the Modbus protocol. This enables data exchange and control within an industrial network.
5.5 Firmware Upload and Debugging
Connect the module to a computer via the USB Type-C port. Use the appropriate development environment (e.g., Arduino IDE, ESP-IDF) to upload custom firmware and debug applications.
6. Devre Kartı Düzeni ve Bileşenleri
Understanding the board layout is crucial for proper connection and operation. The following diagrams highlight key components and their functions.
6.1 Üst View
- ESP32-S3-WROOM-1U-N16R8 (ESP32-S3 module)
- 8-channel quality relays
- Optocoupler isolation for relays
- SIFIRLAMA düğmesi
- PoE header (for PoE module)
- ÖNYÜKLEME düğmesi
- Güç IC'si
- Digital isolation
- Power supply isolation
- Bi-directional optocoupler isolation
- RTC pil tutucu
- Buzzer
- Digital input screw terminals
- Pin header (for other devices)
- LED indicators (PWR, RXD, TXD)
- USB Type-C bağlantısı
- WS2812 RGB LED
- Ethernet portu
- Harici anten konektörü
- Power supply screw terminal
- RS485 iletişim arabirimi
- RS485 matching resistor jumper
- Relay screw terminals
6.2 Alt View
- Yerleşik TV'ler (Geçici Hacimtage Suppressor)
- RS485 conversion chip
- MP1605GTF-Z (DC-DC power module)
- PCF85063ATL (RTC chip)
- TCA9554PWR (GPIO expansion chip)
- W5500 (Ethernet chip)
- TF kart yuvası
7. Özellikler
| Kategori | Parametre | Değer |
|---|---|---|
| Mikrodenetleyici | Modül | ESP32-S3-WROOM-1U-N16R8 (ESP32-S3) |
| İşlemci | Xtensa 32-bit LX7 dual-core, up to 240 MHz | |
| Kablosuz İletişim | Wifi | 2.4 GHz (802.11 b/g/n) |
| Bluetooth | Bluetooth 5, BLE | |
| USB | Bağlayıcı | USB Tip-C |
| Güç Kaynağı | 5V | |
| Isolated Communication Interface | Arayüz | RS485 |
| Koruma | TVS diode, surge protection & ESD protection | |
| Ethernet Arayüzü | Liman | PoE Ethernet port (IEEE 802.3af standard for PoE version) |
| Dijital Giriş | Giriş Kanalları | 8 |
| Giriş Voltage | 5V-36V | |
| Giriş Türü | Passive input / active input (NPN or PNP type) | |
| İzolasyon Tipi | Bi-directional optocoupler isolation | |
| Röle | Röle Kanalları | 8 |
| İletişim Derecelendirmesi | ≤10A 250V AC / 30V DC | |
| İletişim Formu | 1NA 1NK | |
| İzolasyon | Optokuplör izolasyonu | |
| LED Göstergeleri | RGB | Programmable color LED |
| PWR | Kırmızı güç göstergesi | |
| Teksas | Green TX indicator | |
| RXD | Blue RX indicator | |
| Power Supply Screw Terminal | Cilttage Aralık | 7-36V |
| Dış görünüş | Muhafaza | Rail-mount ABS protective case |
| Boyutlar | 175 × 90 × 40 (mm) |
8. Bakım
The Waveshare Industrial 8-Channel ESP32-S3 WiFi Relay Module is designed for robust industrial use. To ensure its longevity and reliable operation:
- Çevresel Koşullar: Operate the module within specified temperature and humidity ranges. Avoid exposure to excessive dust, moisture, or corrosive substances.
- Temizlik: Gerekirse, modülün dış yüzeyini yumuşak, kuru bir bezle nazikçe temizleyin. Sıvı temizleyiciler veya çözücüler kullanmayın.
- Donanım Yazılımı Güncellemeleri: Regularly check the Waveshare Wiki for firmware updates to ensure optimal performance and access to new features.
- Bağlantılar: Periodically inspect all screw terminal connections to ensure they are secure and free from corrosion.
9. Sorun Giderme
If you encounter issues with your Waveshare Industrial 8-Channel ESP32-S3 WiFi Relay Module, consider the following troubleshooting steps:
- Güç Yok:
- Check if the power supply (USB-C or 7-36V terminal) is correctly connected and providing the specified voltage.
- Ensure the PWR LED is illuminated. If not, verify the power source.
- For PoE versions, confirm the Ethernet cable is connected to an active PoE switch/injector.
- No Network Connectivity (Wi-Fi/Ethernet):
- Wifi: Ensure the antenna is securely attached. Verify Wi-Fi credentials and network availability. Try resetting the module.
- Ethernet: Check the Ethernet cable connection. Confirm the network switch/router is operational.
- Relays Not Actuating:
- Verify the control logic in your firmware.
- Check the power supply to the module and the load connected to the relay.
- Ensure the load current and voltage do not exceed the relay's contact rating.
- Digital Inputs Not Responding:
- Confirm correct wiring for passive (dry contact) or active (wet contact) sensors.
- Check the sensor's functionality independently.
- Giriş hacmini doğrulayıntage range for active inputs (5V-36V).
- RS485 Communication Issues:
- Check wiring polarity (A/B).
- Ensure the RS485 matching resistor jumper is correctly set if needed.
- Verify baud rate and communication parameters in your software.
For further assistance, consult the official Waveshare Wiki resources or contact Waveshare technical support.
10. Destek ve Kaynaklar
Waveshare provides comprehensive resources to assist users with their products:
- Official Wiki: The Waveshare Wiki is the primary source for detailed documentation, programming guides, sample code, and technical specifications. Visit the Waveshare store page and look for the Wiki link.
- Teknik Destek: For specific technical inquiries or issues not covered in the documentation, please contact Waveshare customer support through their official channels.
10.1 Garanti Bilgileri
Warranty terms and conditions for this product are provided by Waveshare. Please refer to the product packaging or the official Waveshare webayrıntılı garanti bilgileri için site.
