1. Giriş
This manual provides detailed instructions for the setup, operation, and maintenance of your STRICH PB-S22 Guitar Pedal Board. This pedal board features an integrated power supply, a lightweight yet durable aluminum alloy construction, and an ergonomic design to enhance your musical performance setup. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.
2. Paket İçeriği
Aşağıda listelenen tüm öğelerin paketinizde bulunduğunu doğrulayın:
- STRICH PB-S22 Guitar Pedal Board (22" x 11") with Built-in Power Supply
- High-Quality Gig Bag
- 18V DC Güç Adaptörü
- 8 x DC Power Cables for Pedals
- Hook-and-Loop Strips for Pedal Attachment
Figure 2.1: Complete package contents including the pedal board, gig bag, power adapter, power cables, and hook-and-loop strips.
3. Kurulum
3.1 Attaching Pedals
The pedal board comes with pre-applied hook-and-loop strips on its surface. Additional strips are provided for the bottom of your effects pedals. To attach a pedal:
- Clean the bottom surface of your effects pedal.
- Cut a suitable length of the provided hook-and-loop strip.
- Peel off the adhesive backing and firmly press the strip onto the bottom of your pedal.
- Align the pedal with the desired position on the pedal board and press down firmly to secure it.
Figure 3.1: Demonstrates the process of attaching an effects pedal to the pedal board using the provided hook-and-loop strips.
3.2 Powering the Pedal Board
The STRICH PB-S22 features a built-in power supply. To power the unit:
- Connect the provided 18V DC power adapter to the 'DC 18V In 2000mA' port on the side of the pedal board.
- Plug the power adapter into a standard electrical outlet. A red indicator light will illuminate next to the input port, confirming power is supplied to the board.
Video 3.1: Bir overview of the STRICH Guitar Pedal Board with Built-in Power Supply, demonstrating its features and power connections.
3.3 Connecting Pedals to Power Supply
The pedal board offers 10 independent power output ports for your effects pedals:
- Ports 1-5: 9V DC Out, 100mA each (standard low-current pedals)
- Port 6: 9V DC Out, 300mA (medium-current pedals)
- Port 7: 9V DC Out, 700mA (high-current 9V pedals)
- Port 8: 12V DC Out, 500mA (12V pedals)
- Port 9: 18V DC Out, 500mA (18V pedals)
- Port 10: USB Out, DC5V/800mA (for charging smartphones or other USB-powered devices)
Use the provided DC power cables to connect your pedals to the appropriate output ports. Ensure the voltage and current requirements of your pedals match the output specifications to prevent damage. Each port has an individual blue LED indicator that illuminates when a pedal is connected and receiving power.
4. Kullanım Talimatları
4.1 Kablo Yönetimi
The pedal board's design allows for efficient cable management. Power and patch cables can be routed underneath the board through the open channels, keeping your setup tidy and reducing clutter on the playing surface. This helps prevent accidental disconnections and provides a cleaner aesthetic.
4.2 Ergonomik Tasarım
The pedal board features a slight ergonomic incline (approximately 10 degrees). This tilt is designed to improve comfort and facilitate precise foot placement when engaging or disengaging effects pedals during performances.
Figure 4.1: Illustrates the ergonomic tilt of the pedal board, designed for comfortable and precise foot operation.
5. Bakım
5.1 Temizlik
To clean the pedal board, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish and electronic components.
5.2 Depolama ve Taşıma
When not in use or during transport, store the pedal board in the provided high-quality gig bag. The gig bag is designed to protect the pedal board and attached pedals from dust, scratches, and minor impacts. Ensure all pedals are securely fastened to the board before placing it in the bag.
Figure 5.1: The included gig bag provides protection and ease of transport for your pedal board and effects pedals.
6. Sorun Giderme
6.1 No Power to Pedals
- Ensure the 18V DC power adapter is securely connected to the pedal board and a live electrical outlet. The red indicator light should be on.
- Check that the DC power cables are firmly connected to both the pedal board's output ports and your effects pedals.
- Vol'ün doğru olduğunu doğrulayıntage and current requirements of your pedals match the specifications of the connected output port. Each port has individual short-circuit protection; if a pedal draws too much current or has a short, that specific port may temporarily shut down. Disconnect and reconnect the pedal to reset.
6.2 Unwanted Noise/Hum
- The built-in power supply is designed to deliver clean, noise-free power. However, ensure all patch cables are in good condition and properly shielded.
- Check for any ground loops by ensuring all equipment is connected to the same power circuit if possible.
- Ensure no power cables are running parallel to audio patch cables for extended distances, which can induce noise.
7. Özellikler
| Örnek | PB-S22 |
| Boyutlar | 22 x 11 inç (56 x 28 cm) |
| Ağırlık | 3.31 lbs (1.5 kg) |
| Malzeme | Premium Alüminyum Alaşımı |
| Güç Girişi | DC 18V, 2000mA |
| Power Outputs (9V DC) | 5 x 100mA, 1 x 300mA, 1 x 700mA |
| Power Output (12V DC) | 1 adet 500mA |
| Power Output (18V DC) | 1 adet 500mA |
| USB Çıkışı | DC 5V, 800mA |
| Koruma | Independent Short-Circuit Protection per channel |
8. Garanti ve Destek
8.1 Garanti Bilgileri
Specific warranty details are not provided in the product information. Please refer to the product packaging or contact STRICH customer service for warranty terms and conditions.
8.2 Müşteri Desteği
For technical assistance, troubleshooting, or any inquiries regarding your STRICH Guitar Pedal Board, please contact STRICH customer support through their official webÜrünün satın alındığı site veya perakendeci.
