Önemli Güvenlik Bilgileri
Please read and understand all instructions before installing or operating this water heater. Failure to follow these instructions may result in property damage, personal injury, or death.
- This appliance must be installed by a qualified plumber or electrician in accordance with all local codes and regulations.
- Ensure the power supply matches the specifications of the unit (120V, 1440W).
- Do not operate the water heater if it is not filled with water.
- Install a temperature and pressure relief (T&P) valve as specified in the installation instructions.
- Engelleme veya tamper with the T&P valve.
- Maintain proper clearances around the unit for ventilation and service.
- Herhangi bir bakım veya servis işlemi yapmadan önce elektrik bağlantısını kesin.
Ürün Bittiview
The Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater is designed to provide instant hot water at the point of use, reducing wait times and conserving energy. Its compact design allows for versatile installation in various settings.
Temel Özellikler
- 2.5 Galon Kapasite: Stores heated water for immediate use.
- 1440W Isıtma Elemanı: Provides rapid heating for on-demand hot water.
- Dayanıklı Paslanmaz Çelik Tank: Resists corrosion for extended product life.
- Üç Katmanlı Yalıtım: Features enamel coating, high-density insulation foam, and a reinforced decarburized steel plate for superior heat preservation and reduced energy loss.
- Ayarlanabilir Termostat: Allows precise temperature control up to 85°C (185°F).
- Gelişmiş Güvenlik: Includes high-temperature resistance, high-pressure resistance (up to 1.0 MPa), dry-burn protection, IPX4 waterproof rating, and advanced leakage prevention.
- Çok Yönlü Kurulum: Can be installed under-sink, on a wall, or floor-mounted.
Birim Bileşenleri
The water heater includes the main unit, a temperature and pressure relief (T&P) valve, mounting brackets, and screws.
Resim: Ön view of the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater, showing the control knob and inlet/outlet connections.
Özellikler
Detailed technical specifications for the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater.
| Şartname | Değer |
|---|---|
| Marka | Ranein |
| Model Numarası | RC25G-W |
| Kapasite | 2.5 Galon |
| Cilttage | 120 Volt |
| Netage | 1440 Watt |
| Maksimum Sıcaklık | 85°C (185°F) |
| Maksimum Çalışma Basıncı | 100 PSI (1.0 MPa) |
| Su Geçirmezlik Derecesi | IPX4 |
| Ürün Boyutları (G x Y x D) | 13.39" x 13.39" x 11.42" |
| Ürün Ağırlığı | 17.63 pound |
| Montaj Tipi | Zemin, Duvar |
Image: Visual representation of the water heater's dimensions and key specifications, including capacity, voltage, güç, maksimum su basıncı, ağırlık, ampve su geçirmezlik derecesi.
Kurulum
Kurulumdan Önce
- Verify that the installation location is suitable for the unit's size and weight when full.
- Ensure access to a standard 120V electrical outlet.
- Confirm that water supply lines are accessible and can be connected to the unit.
- Tesisat alanına giden ana su ve elektrik vanalarını kapatın.
Montaj Seçenekleri
The Ranein WarmCube 2.5 can be installed in several configurations:
- Under-Sink: Ideal for kitchens and bathrooms where space is limited.
- Duvara monte: Use the provided mounting brackets and screws to secure the unit to a sturdy wall surface.
- Zemine Monte: Üniteyi sabit, düz bir yüzeye yerleştirin.
Image: Depicts the water heater installed under a sink and wall-mounted in a bathroom vanity, illustrating versatile placement options.
Tesisat Bağlantıları
- Install the provided Temperature and Pressure (T&P) relief valve into the designated port on the top of the water heater. Ensure a watertight seal using appropriate sealant (e.g., PTFE tape).
- Connect the cold water inlet (blue port) to your cold water supply line.
- Connect the hot water outlet (red port) to your hot water faucet or fixture.
- Open the hot water faucet at the fixture to allow air to escape from the tank as it fills with water.
- Once water flows steadily from the hot water faucet, close the faucet. Check all connections for leaks.
Video: Demonstrates the installation of the pressure relief valve onto the Ranein mini tank water heater, showing the proper threading and tightening process.
Elektriksel bağlantı
- Plug the water heater's power cord into a grounded 120V electrical outlet.
- Ensure the outlet is dedicated and properly rated for the appliance's wattage (1440W).
Operasyon
Ilk başlangıç
- After plumbing and electrical connections are complete and checked, turn on the electrical power to the unit.
- Su ısıtıcısının suyu aktif olarak ısıttığını gösteren ısıtma gösterge ışığı yanacaktır.
- Allow sufficient time for the water to reach the desired temperature.
Sıcaklık Ayarı
- The water heater features a front-mounted rotary knob for temperature adjustment.
- Sıcaklığı artırmak için düğmeyi saat yönünde, azaltmak için ise saat yönünün tersine çevirin.
- The temperature range is typically between 55°F (13°C) and 145°F (63°C). Adjust to a comfortable and safe level.
- For energy efficiency, consider setting the temperature to the lowest comfortable setting.
Image: Illustrates the temperature adjustment knob on the water heater, with examples of suitable temperatures for various uses like washing dishes, vegetables, brushing teeth, and washing face.
Bakım
Düzenli bakım, su ısıtıcınızın optimum performans göstermesini sağlar ve kullanım ömrünü uzatır.
Rutin Bakım
- Yıllık inceleme: Have a qualified professional inspect the unit annually for any signs of wear, corrosion, or leaks.
- T&P Vana Testi: Test the T&P relief valve at least once a year by lifting the lever. Ensure water flows freely and then reseats properly. If it does not, replace the valve.
- Dış Temizlik: Ünitenin dışını yumuşak bir bezle temizleyin.amp bezle silin. Aşındırıcı temizleyiciler kullanmayın.
Tankın Boşaltılması
If the unit will be unused for an extended period or if there is a risk of freezing, drain the tank:
- Turn off the electrical power to the water heater.
- Turn off the cold water supply to the unit.
- Open a hot water faucet at a nearby fixture to relieve pressure.
- Carefully open the drain valve (if equipped) or disconnect the cold water inlet to allow the tank to drain.
- Once drained, leave the faucet open and the cold water inlet disconnected until ready to refill.
Sorun giderme
Yaygın sorunlar ve olası çözümleri için aşağıdaki tabloya bakın.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sıcak su yok | Güç yok; Termostat çok düşük ayarlı; Isıtma elemanı arızalı | Güç kaynağını/sigortayı kontrol edin; Termostatı ayarlayın; Müşteri desteğiyle iletişime geçin. |
| Su yeterince sıcak değil | Thermostat set too low; High hot water demand; Cold water mixing | Increase thermostat setting; Allow time for recovery; Check for cross-connection |
| Su çok sıcak | Termostat çok yüksek ayarlanmış | Decrease thermostat setting |
| Leaking from T&P valve | Excessive pressure; Faulty valve | Check water pressure; Replace T&P valve |
| Ünite gürültü yapıyor | Tankta tortu birikmesi | Drain and flush the tank (refer to maintenance section) |
Garanti ve Destek
Ranein products are manufactured to high-quality standards and are backed by a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Ranein customer support through the retailer where the product was purchased or visit the official Ranein webiletişim bilgileri için site.
