giriiş
Thank you for choosing the BESTTEN Super Slim Dimmer Switch. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new dimmer switch. Please read all instructions carefully before installation and retain this manual for future reference.
Image: Six BESTTEN Super Slim Dimmer Switches.
Güvenlik Bilgileri
- UYARI: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that the power is off before wiring.
- Tüm ulusal ve yerel elektrik kurallarına uygun olarak kurun.
- Yalnızca bakır tel kullanın.
- Bu cihaz yalnızca iç mekanda kullanıma uygundur.
- Kısılabilir özelliği olmayan ampullerle kullanmayın.
- Maximum load: 300W for dimmable LED/CFL, 600W for incandescent/halogen.
- Only one dimmer switch can be installed per 3-way circuit.
Paket İçeriği
- BESTTEN Super Slim Dimmer Switch (Quantity as purchased, e.g., 6 switches)
- Montaj Vidaları
Note: Wall plates are not included and must be purchased separately.
Özellikler
| Parametre | Değer |
|---|---|
| Cilttage | 120V, 60Hz |
| Dimmable LED/CFL Max. Load | 300W |
| Incandescent/Halogen Max. Load | 600W |
| Anahtar Türü | Single Pole / 3-Way |
| Kablolama Türü | Wire Pigtails |
| Çalışma Sıcaklığı | 32°F – 104°F (0°C – 40°C) |
| Sertifikalar | ETL/cETL Listelendi |
| Boyutlar (U x G x Y) | 4.13 x 1.73 x 0.87 inç |
Image: Detailed specifications for the dimmer switch.
Image: Super Slim Design dimensions.
Image: Bulb compatibility and wattage derecelendirme.
Kurulum ve Yükleme
Before beginning installation, ensure the power is turned off at the circuit breaker. This dimmer switch is designed for both single-pole and 3-way applications and does not require a neutral wire, making it suitable for older electrical systems.
Image: No neutral wire required feature.
Kablolama Talimatları
- Gücü kapatın: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltage test cihazı.
- Mevcut anahtarı kaldırın: Eski şalteri duvar kutusundan dikkatlice çıkarın.
- Kabloları tanımlayın: Identify the Line (Hot), Load, Ground, and Traveler wires (for 3-way installations). It is recommended to take a picture of the existing wiring before disconnecting.
- Kabloları bağlayın: Refer to the wiring diagrams below for single-pole and 3-way installations. Use wire nuts to secure connections.
- Siyah tel: Connect to the Line (Hot) wire.
- Kırmızı kablo: Connect to the Load wire.
- Yeşil kablo: Topraklama kablosuna bağlayın.
- Red & White wire: This wire is used only in 3-way installations. For single-pole installations, cap this wire with a wire nut. In 3-way installations, connect it to one of the Traveler wires.
- Mount the dimmer: Gently push the wired dimmer switch into the wall box and secure it with the provided screws.
- Duvar plakasını takın: Attach your desired wall plate (not included).
- Gücü geri yükleyin: Sigortadan elektriği tekrar açın.
Image: Single Pole and 3-Way Wiring Diagrams.
3 Yollu Uygulamalar İçin Önemli
For 3-way switches, there are three terminals besides the ground. One terminal is typically a different color than the other two. Label this wire as the Line/Load. The other two terminals connect to the Traveler wires. Caution: Only one dimmer switch can be installed in a 3-way circuit.
Kullanım Talimatları
The BESTTEN Super Slim Dimmer Switch features a rocker switch for ON/OFF control and a slide dimmer for brightness adjustment.
- AÇMA/KAPATMA: Press the bottom part of the rocker switch to turn the lights ON, and the top part to turn them OFF.
- Parlaklığın Ayarlanması: Use the vertical slider on the side of the rocker switch to adjust the light level. Slide up for brighter light and down for dimmer light.
Dimming Range Setting (Sensitivity Dial)
To optimize performance and eliminate flickering with certain bulb types, you may need to adjust the dimmer's sensitivity dial. This small dial is located on the side of the dimmer switch, accessible after removing the wall plate.
- Turn on the switch and move the slide dimmer to its lowest (all the way down) setting.
- Rotate the Sensitivity Dial clockwise all the way down. NOT: If the dial stops in either direction, do not continue to turn it.
- Rotate the Sensitivity Dial counter-clockwise slowly until the preferred lowest light level is achieved and the lights are not flickering.
Image: Dimming Range Setting with Sensitivity Dial.
Bakım
To maintain your dimmer switch, ensure power is off before cleaning. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or internal components. Regular inspection for loose connections or damage is recommended.
Sorun giderme
- Işıklar yanmıyor:
- Devre kesiciyi kontrol edin ve elektriğin geri geldiğinden emin olun.
- Tüm kablo bağlantılarının güvenli olduğunu doğrulayın.
- Ensure the bulb is functional and correctly installed.
- Lights flicker, hum, or buzz:
- Adjust the dimming range using the sensitivity dial as described in the 'Operating Instructions' section.
- Ensure your bulbs are specifically rated as 'dimmable'. Non-dimmable bulbs will not function correctly with a dimmer.
- Some dimmable LED/CFL bulbs may not be fully compatible with all dimmers. Consider trying a different brand or type of dimmable bulb.
- Toplam su miktarını sağlayıntage of connected bulbs does not exceed the dimmer's maximum load capacity.
- Dimmer switch is warm to the touch:
- It is normal for dimmer switches to feel warm during operation. If the dimmer feels excessively hot, ensure the load does not exceed the maximum wattage derece.
Image: Information on eliminating flickering.
Garanti ve Destek
BESTTEN products are designed for reliability and performance. For warranty information or technical support, please refer to the manufacturer's official webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Satın alma belgenizi saklayın.
Daha fazla bilgi ve iletişim ayrıntılarını şu adresten edinebilirsiniz: BESTTEN Mağazası Amazon'da.
