1. Giriş
The DIGITEN THT1032 is a versatile temperature and humidity controller designed for precise environmental management. It features three independent outlets for controlling heating/cooling, humidification/dehumidification, and timed operations. Equipped with dual high-precision probes, this device is suitable for various applications including reptile enclosures, mushroom cultivation, plant seeding, and home brewing.
2. Temel Özellikler
- Tak ve Çalıştır İşlemi: Simple setup with intuitive buttons for quick configuration.
- Dual High-Precision Probes: Separate probes for temperature (accuracy: ±0.4°C/±0.7°F) and humidity (accuracy: ±3%).
- Triple-Zone Precision Control: Three independent outlets for temperature, humidity, and timed devices.
- Büyük LCD Ekran: Clear, real-time monitoring with switchable Fahrenheit/Celsius units.
- Climate Customization: Combine heating/cooling with humidification/dehumidification, and program the third outlet for timers.
3. Paket İçeriği
- DIGITEN THT1032 Controller Unit
- Sıcaklık Probu
- Nem Probu
- Kullanıcı Kılavuzu
4. Ürün Bittiview
The DIGITEN THT1032 controller features a main unit with a large LCD display, control buttons, three power outlets, and two external probes for temperature and humidity sensing.
Resim 1: Ön view of the DIGITEN THT1032 controller, showing the display, buttons, and three power outlets.
4.1. Kontrol Paneli ve Ekran
The front panel includes an LCD screen and four control buttons: SET, MODE, Up (▲), and Down (▼).
Resim 2: Ayrıntılı view of the controller's outlets and control buttons. OUT1 is for temperature, OUT2 for humidity, and OUT3 for timer functions.
- Ayarlama düğmesi: Used to select an outlet for configuration or confirm settings.
- MOD Düğmesi: Used to change the operating mode (e.g., heating/cooling, humidification/dehumidification, timer program).
- Up (▲) Button: Increases values or navigates menu options.
- Down (▼) Button: Decreases values or navigates menu options.
- ÇIKIŞ1: Temperature controlled outlet.
- ÇIKIŞ2: Humidity controlled outlet.
- ÇIKIŞ3: Timer controlled outlet.
4.2. Problar
The controller comes with two separate probes: one for temperature and one for humidity. These probes are essential for accurate environmental monitoring.
Image 3: The temperature probe (left) and humidity probe (right) connected to the controller, illustrating their distinct functions.
5. İlk Kurulum
- Probları Bağlayın: Plug the temperature probe and humidity probe into their respective ports on the controller. Ensure they are securely connected.
- Atama: Position the probes in the environment you wish to monitor and control. Ensure they are not directly exposed to heat sources, moisture, or airflow that could skew readings.
- Güç Açık: Plug the controller into a standard 120V AC power outlet. The display will illuminate, showing current temperature, humidity, and time.
- Cihazları Bağlayın: Plug your heating/cooling device into OUT1, your humidification/dehumidification device into OUT2, and any timed appliance (e.g., lights, misters) into OUT3.
6. Kullanım Talimatları
6.1. Setting Temperature Control (OUT1)
- Basın AYARLAMAK button repeatedly until OUT1 is selected (indicated by a flashing OUT1 icon or similar).
- Kullanın Yukarı (▲) or Aşağı (▼) İstenilen hedef sıcaklığı ayarlamak için düğmeler.
- Basmak MOD to cycle through heating (HEAT) or cooling (COOL) modes. Select the appropriate mode for your connected device.
- Basmak AYARLAMAK to confirm the temperature and mode.
- To set the temperature differential (hysteresis), press and hold AYARLAMAK for a few seconds when OUT1 is selected. Use Yukarı/Aşağı to adjust the difference between the set point and when the device turns on/off. Press AYARLAMAK onaylamak için.
6.2. Setting Humidity Control (OUT2)
- Basın AYARLAMAK button repeatedly until OUT2 is selected.
- Kullanın Yukarı (▲) or Aşağı (▼) buttons to adjust the desired target humidity percentage.
- Basmak MOD to cycle through humidification (HUMIDIFICATION) or dehumidification (DEHUMIDIFICATION) modes. Select the appropriate mode.
- Basmak AYARLAMAK to confirm the humidity and mode.
- To set the humidity differential, press and hold AYARLAMAK for a few seconds when OUT2 is selected. Use Yukarı/Aşağı Ayarlamak için. Basın AYARLAMAK onaylamak için.
6.3. Setting Timer Control (OUT3)
- Basın AYARLAMAK button repeatedly until OUT3 is selected.
- Basmak MOD to enter the timer programming interface.
- Kullanmak Yukarı (▲) or Aşağı (▼) to set the ON time (hour and minute). Press AYARLAMAK Bir sonraki ayara geçmek için.
- Set the OFF time (hour and minute) using Yukarı/Aşağı Ve AYARLAMAK.
- The controller supports multiple ON/OFF programs for OUT3. Refer to the on-screen prompts for additional program slots.
- Basmak AYARLAMAK to save and exit the timer settings.
6.4. Sıcaklık Birimlerinin Değiştirilmesi (°C/°F)
To switch between Celsius and Fahrenheit, press and hold the Yukarı (▲) button for approximately 3 seconds. The display will change accordingly.
7. Bakım
- Temizlik: Kontrol ünitesini yumuşak, kuru bir bezle silin. Aşındırıcı temizleyiciler kullanmayın veya üniteyi suya batırmayın.
- Prob Bakımı: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables. If probes become dirty, gently clean them with a damp cloth and allow them to dry completely before re-use.
- Depolamak: Kullanılmadığı zamanlarda kumanda cihazını serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
8. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Ekran boş veya açılmıyor. | Güç kaynağı yok; bağlantı gevşek. | Kontrol cihazının çalışan bir elektrik prizine güvenli bir şekilde takılı olduğundan emin olun. Güç kaynağını kontrol edin. |
| OUT1/OUT2/OUT3 not activating connected device. | Incorrect settings; device malfunction; power issue. | Verify temperature/humidity/timer settings. Check if the connected device is working independently. Ensure the controller's set point is met for activation. |
| Humidity probe shows "ERR" reading. | Probe malfunction; damaged cable; sensor error. | Check the humidity probe connection. Inspect the probe cable for damage. If the error persists, the probe may need replacement. |
| Yanlış sıcaklık/nem ölçümleri. | Probe placement; dirty probe; probe malfunction. | Relocate probes away from direct heat/moisture/airflow. Clean probes gently. If issues persist, consider probe replacement. |
9. Teknik Özellikler
| Şartname | Değer |
|---|---|
| Model Numarası | THT1032 |
| Güç Gereksinimi | 100-240VAC |
| Yük Kapasitesi | 10A per outlet (1100W@110V, 2200W@220V) |
| Sıcaklık Kontrol Aralığı | -10°C ila 120°C / 14°F ila 248°F |
| Sıcaklık Doğruluğu | ±0.4°C / ±0.7°F |
| Nem Doğruluğu | ±%3 |
| Prob Sensör Tipi | Digital Signal Output, I2C Interface |
| Çalışma Ortamı Sıcaklığı | 0-50°C / 32-122°F |
| Operating Environment Relative Humidity | <85% |
| Görüntü Türü | LCD |
| Malzeme | Plastik |
| Renk | Gri |
| Ürün Ağırlığı | 1.04 pound |
| Paket Boyutları | 6.85 x 6.34 x 1.93 inç |
10. Garanti ve Müşteri Desteği
DIGITEN provides a one-year warranty for any quality-related issues with this product. For technical assistance, troubleshooting, or warranty claims, please contact DIGITEN customer support through the retailer where the product was purchased or visit the official DIGITEN webiletişim bilgileri için site.
Lütfen garanti hizmeti için satın alma belgenizi saklayın.
