GOOLOO GP3000 Jump Starter and AP150 PRO Tire Inflator User Manual

1. Giriş

This manual provides essential information for the safe and effective operation of your GOOLOO GP3000 Jump Starter and GOOLOO AP150 PRO Portable Tire Inflator. Please read all instructions carefully before use and retain this manual for future reference.

2. Önemli Güvenlik Bilgileri

Always observe the following safety precautions to prevent injury or damage to the devices:

• Do not immerse the devices in water or expose them to rain.
• Do not operate the devices if they are damaged.
• Çocukların erişemeyeceği yerde saklayınız.
• Do not disassemble the devices. Refer all servicing to qualified personnel.
• Yalnızca birlikte verilen veya onaylanan aksesuarları kullanın.
• Kullanım ve şarj sırasında uygun havalandırmayı sağlayın.
• Cl'nin kısa devre yapmasını önleyinamps of the jump starter.
• Donmuş bir aküyü atlayarak çalıştırmayın.
• Wear eye protection when operating the jump starter.
• The tire inflator can become hot during prolonged use. Allow it to cool before handling.

3. Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

• GOOLOO GP3000 Atlama Marşı
• Akıllı Jumper Clamps
• GOOLOO AP150 PRO Portable Tire Inflator
• Air Nozzle Adapters (various types)
• USB-C Şarj Kablosu
• Kullanıcı Kılavuzu
• Depolama Kasası

4. Ürün Bittiview

4.1 GOOLOO GP3000 Jump Starter

The GP3000 is a powerful 3000A peak current jump starter designed for 12-volt vehicles (up to 9-liter gasoline and 7-liter diesel engines). It also functions as a portable power bank and an emergency LED light.

Image: The GOOLOO GP3000 Jump Starter unit shown with its smart jumper clamps. The unit is black and yellow, featuring a power button and battery indicator lights.

Temel Özellikler:

• 3000A Tepe Akımı: Capable of starting large engines.
• "BOOST" Function: Tamamen ölü veya düşük sesli olanlar içintage piller.
• Çoklu Koruma Sistemi: Includes over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltagAşırı yük ve ters şarj koruması.
• Taşınabilir Güç Bankası: USB output ports for charging mobile devices.
• LED El Feneri: With Normal, Strobe, and SOS modes.

Image: The GOOLOO GP3000 Jump Starter highlighting its comprehensive safety features, including icons for over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltagAşırı yük ve ters şarj koruması.

4.2 GOOLOO AP150 PRO Portable Tire Inflator

The AP150 PRO is a portable air compressor designed for fast and precise tire inflation. It features a dynamic LED display, multiple inflation modes, and also serves as a power bank and emergency light.

Image: The GOOLOO AP150 PRO Portable Tire Inflator shown with its various nozzle adapters and examples of vehicles and items it can inflate, such as cars, motorcycles, bicycles, and balls.

Temel Özellikler:

• Super-Fast Inflation: High-performance motor for quick inflation.
• Dynamic Progress LED Display: Real-time tracking of inflation progress, visible even in bright sunlight.
• 5 Inflation Modes: Car, motorcycle, bicycle, ball, and custom.
• 3 Pressure Units: PSI, KPA, BAR.
• Akıllı Otomatik Kapanma: Önceden belirlenen basınca ulaşıldığında otomatik olarak durur.
• High-Efficiency Battery Management System (BMS): Ensures safe and reliable operation.
• 45 Minutes Wireless Continuous Inflation: Uzun ömürlü pil performansı.
• 3'si 1 arada Çok Fonksiyonlu Tasarım: Air pump, mobile power supply, and emergency LED light (lighting and SOS modes).

Image: The GOOLOO AP150 PRO Tire Inflator's large LED screen, illustrating its five different inflation modes (car, motorcycle, bicycle, ball, and custom) with corresponding icons and color changes.

5. Kurulum ve Şarj

5.1 Charging the GOOLOO GP3000 Jump Starter

Before first use, fully charge the GP3000. Connect the provided USB-C charging cable to the input port on the jump starter and to a USB wall adapter (not included). The battery indicator lights will illuminate to show charging progress. All lights will be solid when fully charged.

5.2 Charging the GOOLOO AP150 PRO Tire Inflator

Fully charge the AP150 PRO before initial use. Connect the provided USB-C charging cable to the charging port on the inflator and to a USB power source. The LED display will indicate the charging status. The device is fully charged when the battery icon shows full.

6. Kullanım Talimatları

6.1 Operating the GOOLOO GP3000 Jump Starter

1. Akü takviye cihazının en az %50 şarjlı olduğundan emin olun.
2. Bağlan kırmızı clamp aracın pozitif (+) akü terminaline.
3. Bağlan siyah clamp aracın negatif (-) akü terminaline.
4. cl'yi sağlayınamps are securely connected and the smart cable indicator light is green.
5. If the indicator light is not green, or the vehicle battery is completely dead, press the ARTIRMAK button on the smart cable. Wait for the indicator light to turn green.
6. Aracın motorunu çalıştırın.
7. Motor çalıştıktan hemen sonra akıllı kilidi çıkarın.amps from the vehicle battery, first the black clampsonra kırmızı clamp.

Taşınabilir Güç Bankası Olarak Kullanımı:

Connect your USB-powered devices to the USB output ports on the GP3000 using appropriate charging cables. The jump starter will automatically begin charging your devices.

Image: The GOOLOO GP3000 Jump Starter demonstrating its function as a portable power bank, charging various electronic devices like smartphones, tablets, and smartwatches.

LED Işığını Kullanma:

Press and hold the power button on the GP3000 to turn on the LED flashlight. Press again to cycle through Normal, Strobe, and SOS modes. Press and hold to turn off.

Image: A user operating the GOOLOO GP3000 Jump Starter's LED light function in a dark engine bay, illustrating its utility as an emergency light source with Normal, Strobe, and SOS modes.

6.2 Operating the GOOLOO AP150 PRO Tire Inflator

1. Ensure the AP150 PRO is sufficiently charged.
2. Connect the air hose to the inflator and securely screw the nozzle onto the tire valve stem.
3. Press the power button to turn on the inflator. The LED display will show the current tire pressure.
4. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball, or custom).
5. Hedef basıncı ayarlamak için '+' ve '-' düğmelerini kullanın.
6. Press the inflation button (often indicated by a fan icon) to start inflation. The display will show real-time pressure.
7. The inflator will automatically shut off once the preset pressure is reached.
8. Unscrew the nozzle from the tire valve and disconnect the air hose.

Image: The GOOLOO AP150 PRO Portable Tire Inflator actively inflating a car tire, demonstrating its cordless and fast inflation capability. The digital display shows the pressure reading.

Image: The GOOLOO AP150 PRO Tire Inflator's display showing both the real-time tire pressure and the preset target pressure, with clear visibility even in bright sunlight, and highlighting its auto shut-off feature.

Using as a Portable Power Bank and LED Light:

The AP150 PRO can also charge small electronic devices via its USB output port. It includes an integrated LED light with lighting and SOS modes, activated by a dedicated button, for use in emergencies or low-light conditions.

7. Bakım ve Saklama

• Clean the devices with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Store both devices in a cool, dry place, away from direct sunlight and extreme temperatures.
• For optimal battery life, charge both devices every 3-6 months, even if not in use.
• Keep the charging ports and air nozzle free from dust and debris.

8. Sorun Giderme

8.1 GP3000 Jump Starter Issues

• Araç çalışmıyor: cl'yi sağlayınamps are connected correctly and securely. Check if the jump starter has sufficient charge. Try using the ARTIRMAK function if the battery is completely dead.
• akıllı clamp indicator light is red: This indicates a reverse polarity connection or a short circuit. Disconnect and reconnect the clampdoğru.

8.2 AP150 PRO Tire Inflator Issues

• Şişirme pompası çalışmıyor: Cihazın şarj edildiğinden emin olun.
• Inflator does not start pumping: Check if the hose is securely connected to both the inflator and the tire valve. Ensure a target pressure is set and the inflation button is pressed.
• Yanlış basınç okuması: Ensure the nozzle is tightly screwed onto the tire valve to prevent air leakage.

9. Özellikler

9.1 GOOLOO GP3000 Jump Starter

9.2 GOOLOO AP150 PRO Portable Tire Inflator

10. Garanti ve Destek

GOOLOO products come with a standard warranty. For detailed warranty information, product support, or to report any issues, please visit the official GOOLOO website or contact their customer service directly. Contact information can typically be found on the product packaging or the GOOLOO brand store on Amazon.