1. Önemli Güvenlik Bilgileri
Please read and understand all instructions before attempting to install, operate, or maintain this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage, personal injury, or death.
- UYARI: Elektrik çarpması riski. Kurulum veya bakım işlemlerinden önce sigorta veya devre kesiciden elektriği kesin.
- UYARI: Risk of fire. Keep combustible materials away from the lamp.
- Bu ürün, ürünün yapısı ve işletimi ile ilgili tehlikeleri bilen bir kişi tarafından geçerli kurulum koduna uygun olarak kurulmalıdır.
- Kurulum ve servis sırasında koruyucu gözlük ve eldiven kullanın.
- Ensure all connections are secure and correct to prevent electrical hazards.
2. Ürün Bittiview
The Lithonia Lighting GTX 2x4 LED Flat Panel Light is a high-performance commercial ceiling fixture designed for various applications including offices, schools, and retail spaces. It provides superior illumination with minimal glare, featuring an A12 prismatic lens and an extruded aluminum frame for durability and excellent light shielding.
Temel özellikler şunlardır:
- Yüksek Parlaklık: 5000 lümen ışık çıkışı sağlar.
- Renk Sıcaklığı: 4000K cool white light for a crisp, clear environment.
- Enerji Verimliliği: Long-life LED technology with a high-efficiency external driver.
- Kısılabilir: 0-10V dimmable driver allows smooth dimming down to 10%.
- Sertifikalar: CSA certified, IC rated, IP5X rated, NSF/ANSI Standard 2 rated, and DLC qualified.
- Düşük Profesyonelfile Tasarım: Ideal for installation in restricted plenum spaces.
Image: The Lithonia Lighting GTX 2x4 LED Flat Panel Light, showcasing its sleek, low-profile tasarım.
Video: Bir fazlaview of the Lithonia Lighting GTX LED Panel's features, highlighting its design and performance benefits.
3. Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:
- GTX 2x4 LED Flat Panel Light Fixture
- Mounting Hardware (integral T-bar clips)
- Kurulum Talimatları
4. Özellikler
| Özellik | Şartname |
|---|---|
| Marka | Lithonia Aydınlatma |
| Model Adı | GTX |
| Parça Numarası | GTX 2X4 5000LM 40K A12 M2 |
| Boyutlar (U x G x Y) | 47.7" x 23.7" x 1.4" |
| Parlaklık | 5000 Lümen |
| Renk Sıcaklığı | 4000K (Soğuk Beyaz) |
| Cilttage | 120-277 Volts (MVOLT) |
| Karartma | 0-10V Dimmable (down to 10%) |
| Malzeme | Aluminum (frame), Plastic (lens) |
| Lens Türü | A12 Prismatic Lens |
| Montaj Tipi | Ceiling Mount (T-grid ceilings) |
| İç/Dış Mekan Kullanımı | Indoor (Certified for damp konumlar) |
| Sertifikalar | CSA, IC Rated, IP5X Rated, NSF/ANSI Standard 2, DLC Qualified, NOM Certified |
| Ağırlık | 8.68 pound |
5. Kurulum Talimatları
Before starting, ensure power is turned off at the circuit breaker. Wear appropriate personal protective equipment, including safety glasses and gloves.
Gömme Tavan Montajı
- Prepare Wiring Compartment: To begin, remove the access plate on the fixture and remove the plastic bushing. Then, replace the access plate and secure it with a screw.
- Connect Pre-wire Whip: Snap the fixture end of the pre-wire whip into the access plate.
- Pozisyon Fikstürü: Carefully install the fixture into the T-Bar ceiling opening.
- Güvenli Fikstür: From above the ceiling, secure the panel to the T-bar by bending the built-in T-bar clips on all four corners of the fixture.
- Elektrik Bağlantıları: Make all necessary electrical connections according to local electrical codes. If connecting to a 0-10V low voltage dimmer, consult the wiring diagram included with your dimmer for specific instructions.
Video: Detailed installation guide for the Lithonia Lighting GTX LED Panel in a recessed ceiling mounting configuration.
6. Kullanım Talimatları
Once installed and wired correctly, the GTX LED Flat Panel Light operates like a standard lighting fixture. It can be controlled via a wall switch or a compatible 0-10V dimmer switch.
- Güç Açma/Kapatma: Duvara bağlı anahtarı kullanarak aydınlatma armatürünü açıp kapatabilirsiniz.
- Karartma: If connected to a 0-10V dimmer, adjust the dimmer switch to control the light output from 100% down to 10%.
7. Bakım
The Lithonia Lighting GTX LED Flat Panel Light requires minimal maintenance. Ensure power is disconnected before performing any maintenance.
- Temizlik: Clean the fixture and lens with a soft, damp Bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın, çünkü bunlar yüzeye veya lense zarar verebilir.
- LED Uzun Ömürlülüğü: The integrated LED lights are designed for long life and do not require replacement.
- Denetleme: Armatürde herhangi bir hasar veya gevşek bağlantı belirtisi olup olmadığını periyodik olarak kontrol edin.
8. Sorun Giderme
If you experience issues with your GTX LED Flat Panel Light, refer to the following common troubleshooting steps:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Işık yanmıyor | No power to the fixture, loose wiring, faulty switch | Check circuit breaker, ensure all wiring connections are secure, test the switch. |
| Işık titriyor veya vızıldıyor. | Incorrect dimmer type, loose wiring, power fluctuations | Ensure a compatible 0-10V dimmer is used, check wiring, consult an electrician for power issues. |
| Işık çıkışı çok düşük/yüksek | Dimmer setting, incorrect wiring for dimming | Adjust dimmer to desired level, verify 0-10V wiring connections. |
If the problem persists after attempting these solutions, contact a qualified electrician or Lithonia Lighting customer support.
9. Garanti ve Destek
This Lithonia Lighting GTX LED Flat Panel Light is backed by a 5 yıllık sınırlı garantiBu garanti, normal kullanım ve servis koşulları altında malzeme ve işçilik kusurlarını kapsar.
For warranty claims, technical support, or further assistance, please refer to the contact information provided with your purchase documentation or visit the official Lithonia Lighting webalan.
