AXA Model 7508 Sürgülü Kollu Kapı Kapatma Mekanizması - Kullanım Kılavuzu

giriiş

This manual provides comprehensive instructions for the installation, operation, and maintenance of the AXA Model 7508 Door Closer with Slide Arm. Designed for various applications including communal housing, schools, offices, commercial spaces, and hospitality, this door closer ensures reliable and automatic door closing. It complies with European Standard EN 1154 and accessibility standard NEN 1814, making it suitable for areas frequented by individuals with disabilities and children. It is also tested and approved for fire doors according to EN 1634.

The AXA Model 7508 helps prevent heat loss and drafts, contributing to energy efficiency.

Paket İçeriği

Kuruluma başlamadan önce lütfen tüm bileşenlerin mevcut olduğundan emin olun:

• 1x AXA Model 7508 Door Closer unit
• Montaj donanımı (vidalar, dübeller vb.)
• Installation template (A3 size)
• Kullanım Kılavuzu

Şekil 1: Package contents, including the door closer, mounting materials, and the installation manual.

Kurulum ve Yükleme

The AXA Model 7508 door closer is designed for surface mounting. A detailed A3-sized installation template is included to facilitate correct positioning and drilling.

1. Hazırlık: Ensure the door and frame are clean and free from obstructions. Determine the desired mounting position (push side or pull side, standard or parallel arm installation). Refer to the included A3 installation template for specific measurements and drilling points.
2. İşaretleme: Use the provided A3 template to accurately mark the drilling points on the door and door frame.
3. Delme: Drill pilot holes at the marked positions according to the template's specifications.
4. Kapatma Gövdesinin Montajı: Secure the main door closer body to the door or frame using the supplied mounting hardware. Ensure it is firmly attached and level.
5. Attaching the Slide Arm: Attach the slide arm to the door closer body and the slide channel to the door frame. Ensure all connections are secure.
6. İlk Ayarlama: After installation, perform an initial check of the door's closing function. Fine-tune the closing speed and end stroke as described in the "Operating" section.

Şekil 2: The AXA Model 7508 Door Closer correctly installed on a door frame.

Şekil 3: Example of the AXA Model 7508 Door Closer installed on a contemporary door.

İşletme ve Ayarlamalar

The AXA Model 7508 offers adjustable closing speed, end stroke, opening damping, and closing delay to suit various door types and user preferences.

Şekil 4: Key adjustable features of the door closer.

Şekil 5: Ayrıntılı view of adjustable parameters and their effects on door movement.

• Ayarlanabilir Kapanma Hızı: This setting controls how quickly the door closes from its fully open position until it reaches the final closing phase. Use a hex key or screwdriver (depending on the model) to turn the adjustment valve. Turning clockwise typically decreases speed (slower close), while counter-clockwise increases speed (faster close).
• Adjustable End Stroke (Latching Speed): This controls the speed of the door during the last few degrees of closing, ensuring it latches securely without slamming. Adjust this independently from the main closing speed.
• Adjustable Opening Damping (Backcheck): If present, this feature provides resistance when the door is opened forcefully beyond a certain point, preventing damage to the door or wall.
• Adjustable Closing Delay: If present, this feature holds the door open for a set period before it begins to close, useful for high-traffic areas or for allowing passage of equipment.

Always make small adjustments and test the door's operation after each change to achieve the desired closing behavior.

Bakım

The AXA Model 7508 Door Closer is designed for durability and requires minimal maintenance. Regular checks can ensure optimal performance and longevity.

• Temizlik: Periodically wipe the door closer body and slide arm with a soft, damp Toz ve kiri temizlemek için bir bez kullanın. Aşındırıcı temizleyicilerden kaçının.
• Bağlantı Elemanı Kontrolü: Annually inspect all mounting screws and fasteners to ensure they are tight. Re-tighten if necessary.
• İşlevsellik Kontrolü: Test the door closer's operation periodically to ensure the closing speed and end stroke remain as desired. Readjust if needed.
• Yağlama: The internal mechanisms are factory-lubricated and generally do not require additional lubrication. If unusual noises or stiffness occur, consult a professional.

Sorun giderme

If you encounter issues with your AXA Model 7508 Door Closer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact AXA customer support.

Özellikler

Detailed technical specifications for the AXA Model 7508 Door Closer:

• Model Numarası: 7508
• Parça Numarası: 750813564
• Marka: AXA (Allegion Netherlands B.V.)
• Renk: Siyah
• Malzeme: Döküm demir
• Ürün Ölçüleri (U x G x Y): 24 x 5.2 x 6 cm (9.45 x 2.05 x 2.36 inç)
• Ürün Ağırlığı: 2.27 kg (2270 gram)
• Maksimum Kapı Ağırlığı: 60 kg'a kadar
• Kurulum Türü: Yüzeye Monte Edilmiş
• Dahil Bileşenler: Door closer unit, mounting hardware
• Uyumluluk: EN 1154, NEN 1814, EN 1634 (for fire doors)
• Önerilen Uygulamalar: Communal housing, schools, offices, commercial spaces, hospitality, suitable for areas with individuals with disabilities and children, fire doors.

Şekil 6: Technical dimensions of the AXA Model 7508 Door Closer.

Garanti ve Destek

For warranty information or technical support regarding your AXA Model 7508 Door Closer, please contact Allegion Netherlands B.V. (AXA Home Security) directly. Refer to the product packaging or the official AXA webEn güncel iletişim bilgileri için sitemizi ziyaret edin.

Üretici: Allegion Netherlands B.V. (AXA Home Security)

Daha fazla yardım için şu adresi ziyaret edebilirsiniz: AXA Store on Amazon.