giriiş
Thank you for choosing the RAINPOINT Automatic Watering System. This system is designed to provide effortless and precise watering for your indoor plants, balcony plants, or up to 10 potted plants. With programmable settings and adjustable water flow, it ensures your plants receive the optimal amount of water, saving you time and effort.
This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your new watering system.
Kutuda Neler Var?
Lütfen paketinizin içeriğini aşağıdaki listeye göre kontrol edin:
- 1x RAINPOINT Water Pump
- 1x 10m Hoses
- 10x Micro-Drippers
- 10x Water Flow Control Valves
- 10x T-Connectors
- 3x Straight Connectors
- 3x Cross Connectors
- 3x End Plugs
- 1x Filtre
- 1 adet geri dönüşsüz valf
- 1x USB Şarj Kablosu
- 1x Kanca
- 1x Kullanım Kılavuzu
Kurulum ve Yükleme
Follow these steps to set up your RAINPOINT Automatic Watering System. For a visual guide, please refer to the installation video below.
Kurulum Video Kılavuzu
Güç Kaynağı Bağlantısı
Insert 4 AA batteries (not included) into the battery compartment or connect the system using the provided USB cable. For continuous operation, both options can be used simultaneously.
Image: Demonstrates inserting AA batteries and connecting the USB cable for power. Tüp Hazırlama
Measure and cut the 10-meter hose into appropriate lengths based on the distance between your water source and each plant, and between plants. Connect the cut hose segments using the straight, T-shaped, and cross connectors as needed to create your desired irrigation layout.
Image: Shows different types of connectors (straight, T-shaped, cross) for flexible tube connections. Micro-Dripper and Flow Valve Assembly
Attach a micro-dripper to the end of each tube segment that will go into a plant pot. Connect a water flow control valve to each micro-dripper. These valves allow you to precisely adjust the water output for individual plants.
Image: Illustrates how to adjust the water flow using the blue control valve on the micro-dripper. Filter and Check Valve Installation
Install the filter at the end of the inlet pipe (the pipe drawing water from the reservoir) to prevent impurities from entering the pump. Connect the check valve to the outlet pipe (the pipe leading water out of the pump) to prevent backflow and siphoning, ensuring proper system function.
Image: Highlights the anti-siphon valve and filter components, crucial for preventing water backflow and ensuring clean water delivery. Pompa Yerleşimi
Place the water pump unit with its inlet pipe and filter into your water reservoir (e.g., a bucket or container filled with water). Use the integrated hook to secure the pump unit to the edge of the reservoir.
Image: The main unit of the RAINPOINT watering system attached to a water reservoir, with tubes leading to potted plants.
Kullanım Talimatları
Automatic Watering Program
The system allows you to set a watering frequency and duration. Use the buttons on the unit to navigate the menu and adjust settings.
- Sulama Süresi: Set how long the pump runs for each watering cycle (20 seconds to 30 minutes).
- Sulama Sıklığı: Set how often the system waters (every 1 hour to 7 days).
- Gecikme Süresi: You can set a delay (1 to 24 hours) to postpone watering, useful for rainy days to avoid overwatering.
Manuel Sulama
To water your plants immediately without interrupting the set program, press and hold the "OK" button. The system will water for a duration between 20 seconds and 30 minutes, depending on your manual setting.
Adjusting Water Flow for Individual Plants
Each micro-dripper is equipped with a flow control valve. Rotate this valve to precisely adjust the water volume delivered to each plant, catering to different plant types and sizes.
Bakım
- Filtre Temizleme: Regularly check and clean the water filter to prevent blockages and ensure optimal pump performance. A clogged filter can reduce water flow or damage the pump.
- Pil Değişimi: If using batteries, replace them when the low battery indicator appears on the display. Ensure to use 4 new AA batteries.
- Tüp Muayenesi: Periodically inspect the hoses and connections for any leaks or damage. Ensure all connections are secure to prevent water loss.
- Kış Deposu: If using outdoors, drain all water from the system and store it in a dry, frost-free location during winter months to prevent damage.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Su akışı yok veya çok zayıf. | Clogged filter; Low water level in reservoir; Kinked or blocked hose; Low battery. | Clean the filter; Refill water reservoir; Check hoses for kinks or blockages; Replace batteries or connect USB power. |
| Bağlantılarda su kaçağı | Hoses not fully inserted into connectors; Damaged connectors or hoses. | Ensure hoses are firmly pushed into connectors (try soaking hose ends in warm water for easier insertion); Replace any damaged components. |
| System not responding to button presses | Low battery; System malfunction. | Replace batteries or connect USB power; If problem persists, contact customer support. |
| Pompa çalışıyor ama su gelmiyor. | Air in the system; Inlet pipe not fully submerged; Check valve installed incorrectly. | Ensure inlet pipe is fully submerged; Prime the pump by running it manually until water flows; Verify check valve orientation. |
Özellikler
- Modeli: AB-SD001-M
- Malzeme: Plastik
- Boyutlar (U x G x Y): 21x14x10 cm
- Ürün Ağırlığı: 690 gr
- Maksimum Su Akışı: 24 L/saat
- Max. Pump Height: 3m
- Güç Kaynağı: 4x AA Batteries (not included) or USB 5V/1A
- Çalışma Sıcaklığı: 0-50°C
- Maks. Alan sayısı Su basıncı: 0.3 Bar
Garanti ve Destek
RAINPOINT offers a 45-day money-back guarantee and a 36-month replacement offer for this product. If you encounter any issues or have questions, please contact RAINPOINT customer support for assistance.
For further information or support, please visit the official RAINPOINT store on Amazon: RAINPOINT Mağazası
