RAB Lighting B17 LED Direk Aydınlatma Kullanım Kılavuzu

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Temel özellikler şunlardır:

• Energy-efficient LED with a 50,000-hour lifespan.
• Ayarlanabilir sutage: 24W, 19W veya 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• Islak mekanlar için UL onaylıdır.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Güvenlik Bilgileri

UYARI: Elektrik çarpması riski vardır. Kurulum veya bakım işlemlerinden önce elektriği kesin. Kurulum, geçerli tüm ulusal ve yerel elektrik yönetmeliklerine uygun olarak yetkili bir elektrikçi tarafından yapılmalıdır.

• Tedarik hacmini sağlayıntage, armatür için doğrudur.
• Do not handle live components.
• Uygun kişisel koruyucu ekipman (KKE) giyin.
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Aydınlatma armatüründe herhangi bir değişiklik yapmayın. Yapılacak her türlü değişiklik garantiyi geçersiz kılabilir ve güvenlik tehlikeleri oluşturabilir.

3. Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Kullanım Kılavuzu (bu belge)

4. Kurulum ve Kurulum

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Kurulum Sitesini Hazırlayın: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Gücü Kesin: Herhangi bir elektrik işine başlamadan önce sigortadan elektriği kesin.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Elektrik Bağlantılarını Yapın: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Tüm bağlantıların güvenli ve yalıtılmış olduğundan emin olun.
5. Seçin Wattage ve CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Gücü Geri Yükle: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Kullanım Talimatları

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24W: Maksimum parlaklık.
• 19W: Medium brightness, reduced energy use.
• 14W: Lower brightness, maximum energy savings.

Ayarlamak için: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Selectable Color Temperature (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

Ayarlamak için: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. 0-10V Dimming

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Bakım

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Temizlik: Armatürün dış yüzeyini periyodik olarak yumuşak bir bezle temizleyin.amp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• Denetleme: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• LED Değişimi: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting webBelirli garanti koşulları ve iletişim bilgileri için siteye veya satın alma belgelerinize bakın.

RAB Lighting Contact: www.rablighting.com