Önemli Güvenlik Bilgileri
WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.
- Kullanmadan önce tüm vida ve cıvataların iyice sıkıldığından emin olun.
- Sandalyenin üzerine çıkmayın.
- Avoid placing heavy objects on the chair that could cause instability.
- Regularly inspect the chair for loose parts or damage.
Paket İçeriği
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Hbada P2 Ergonomic Office Chair components
- Montaj donanım kiti
- Welcome guide (this manual)
Image: Fully assembled Hbada P2 Office Chair in a home office setting.
Montaj Talimatları
Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Bileşenleri Paketinden Çıkarın: Tüm parçaları ambalajından dikkatlice çıkarın ve serin.
- Tekerlekleri Tabana Takın: Insert the casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Gazlı Asansörü Takın: Place the gas lift cylinder into the center hole of the chair base.
- Koltuk Mekanizmasını Monte Edin: Attach the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
- Kolçakları takın: Secure the armrests to the seat cushion using the designated screws.
- Connect Backrest to Seat: Attach the backrest to the seat assembly.
- Mount Seat Assembly to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder.
- Baş Desteğini Takın: Slide the headrest into the slots at the top of the backrest.
- Son Kontrol: Verify all connections are secure and the chair functions correctly.
Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.
Kullanım Talimatları
Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.
1. Koltuk Yükseklik Ayarı
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.
2. Yatırma Fonksiyonu
The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.
Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.
3. 3D Adjustable Lumbar Support
The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.
- Yükseklik Ayarı: Push the lumbar support up or down.
- Derinlik Ayarı: Rotate the knob (if present) or push the support forward/backward.
- Side-to-Side Motion: The lumbar support offers 10° side-to-side motion for dynamic support.
Resim: Ayrıntılı view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.
4. 2 Boyutlu Ayarlanabilir Başlık
The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.
Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.
5. Kolçak Ayarı
The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.
Resim: View of the armrest, indicating the mechanism for height adjustment.
Bakım
Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.
- Temizlik:
- For mesh and fabric surfaces, use a soft cloth dampYumuşak sabun ve su ile yıkayın. Sert kimyasallardan kaçının.
- For plastic and metal parts, wipe with a clean, damp Kumaş.
- Do not saturate the chair with water.
- Denetleme: Tüm vida ve cıvataların sıkılığını düzenli olarak kontrol edin. Gerekirse tekrar sıkın.
- Tekerlekler: Keep casters clean from hair and debris to ensure smooth movement.
- Gaz Kaldırma: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.
Image: Diagram illustrating the layered construction of the elastic foam seat cushion.
Sorun giderme
If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sandalyenin yüksekliği ayarlanmıyor. | Gazlı kaldırma mekanizması arızalı veya kol devreye girmemiş. | Ensure the height adjustment lever is fully engaged. If the issue persists, contact customer service. |
| Sandalye sallanıyor veya dengesiz. | Gevşek vidalar veya düzgün olmayan montaj. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Tekerlekler düzgün bir şekilde dönmüyor | Tekerleklere sıkışan döküntüler. | Clean any hair, dust, or debris from the caster wheels. |
| Sırt dayanağı yatırılmıyor veya kilitlenmiyor | Recline mechanism not engaged or damaged. | Ensure the recline lever is fully engaged. If the mechanism is stuck, try gently rocking the chair while adjusting. Contact customer service if it remains unresponsive. |
Özellikler
| Özellik | Detay |
|---|---|
| Marka | hbada |
| Model Numarası | P2 |
| Renk | Beyaz |
| Genel Yükseklik | 105.5 - 126.5 cm (41.5 - 49.8 inç) |
| Taban Genişliği | 70 cm (27.6 inç) |
| Koltuk Genişliği | 51 cm (20.1 inç) |
| Oturma derinliği | 52 cm (20.5 inç) |
| Koltuk Yüksekliği Aralığı | 40 - 48 cm (15.7 - 18.9 inç) |
| Ürün Ağırlığı | 43 pound |
| Sırt Stili | Fileli Sırt |
| Dolgu Malzemesi | Hafızalı Köpük |
| Yatar Pozisyonlar | 3 (90°, 110°, 135°) |
| Bel Desteği | 3D Adjustable (Height, Depth, Width, 10° Side-to-Side Motion) |
| Baş dayanağı | 2D Adjustable (Height, 40° Swivel) |
| Kolçaklar | Height Adjustable (7.5 cm / 3 inches range) |
| Maksimum Ağırlık Kapasitesi | 264 kilo |
Garanti ve Müşteri Desteği
Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.
- Garanti: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
- İade: A 30-day free return policy is available.
- Price Match: A 15-day price match guarantee is offered.
- Müşteri Hizmetleri: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada webiletişim bilgileri için site.
