1. Giriş
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ledvance LED Floodlight with Motion and Light Sensor. Please read these instructions carefully before installation and retain them for future reference.
The Ledvance LED Floodlight is a high-performance outdoor lighting solution featuring 41W power, 6000 lumens brightness, a 100-degree beam angle, and a cool white (4000K) light output. It is designed for outdoor use with an IP65 rating, ensuring protection against dust and water jets. Integrated motion and light sensors provide automated control for enhanced energy efficiency and security.
Image 1: Ledvance LED Floodlight with integrated motion and light sensor.
2. Güvenlik Talimatları
- Elektriksel Güvenlik: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
- Cilttage: Tedarik hacminin doğrulandığını doğrulayıntage matches the requirements specified on the product label (220-240V AC, 50/60Hz).
- Topraklama: The floodlight must be properly grounded to prevent electric shock.
- IP65 Derecesi: Bu ürün IP65 derecesine sahiptir, yani toz girişine ve her yönden gelen düşük basınçlı su jetlerine karşı korumalıdır. Dış mekan kullanımına uygundur ancak suya batırılmamalıdır.
- Sıcaklık: Do not operate the floodlight outside its specified operating temperature range.
- Sıcaklık: The floodlight surface may become hot during operation. Avoid direct contact.
- Işık kaynağı: Do not stare directly into the LED light source when it is illuminated, as this may cause eye damage.
3. Paket İçeriği
Carefully unpack the box and ensure all components are present and undamaged. The package should contain:
- Ledvance LED Floodlight with integrated motion sensor and light sensor
- Montaj braketi
- Installation screws and wall plugs (may vary by region)
- Kullanım Kılavuzu (bu belge)
4. Kurulum
4.1 Montaj Yeri
Choose a suitable mounting location that provides the desired illumination area and allows for optimal sensor performance. The floodlight can be surface-mounted on a wall, floor, or ceiling. Consider the following:
- Ensure the mounting surface is strong enough to support the weight of the floodlight.
- Avoid mounting near heat sources or reflective surfaces that could interfere with the motion sensor.
- For optimal motion detection, mount the floodlight at a height of 1.8 to 2.5 meters.
4.2 Montaj Adımları
- Gücü Kesin: İşe başlamadan önce, kurulum alanına giden ana güç kaynağının devre kesiciden kapatıldığından emin olun.
- Delme Noktalarını İşaretleyin: Montaj braketini şablon olarak kullanarak seçilen yüzey üzerinde delme noktalarını işaretleyin.
- Matkap Delikleri: Drill holes of appropriate size for the wall plugs. Insert the wall plugs.
- Braketi Takın: Birlikte verilen vidaları kullanarak montaj braketini yüzeye sabitleyin.
- Elektrik Bağlantısı: Connect the mains power cable to the floodlight's terminal block. Ensure correct polarity (Live, Neutral, Earth). Use a suitable waterproof junction box if necessary to maintain the IP65 rating.
- Projektörü takın: Secure the floodlight body to the mounting bracket. Adjust the angle of the floodlight and the sensor as desired.
- Gücü Geri Yükle: Kurulum tamamlandıktan ve tüm bağlantılar güvenli bir şekilde yapıldıktan sonra, devreye tekrar güç verin.
Image 2: Product dimensions (201mm x 56.5mm x 219mm).
5. Operasyon
The Ledvance LED Floodlight operates automatically using its integrated motion and light sensors. There is no manual on/off switch for daily operation. The floodlight will activate based on the sensor settings.
5.1 Sensor Adjustment
The motion and light sensors can be adjusted to suit your specific needs. Typically, adjustment dials or buttons are located on the sensor unit itself. Refer to the markings on the sensor for specific functions.
- TIME (Delay Time): This dial controls how long the light remains on after motion is detected and no further motion is sensed. Common settings range from a few seconds to several minutes.
- LUX (Işık Hassasiyeti): This dial determines the ambient light level at which the sensor becomes active. Set it to a low LUX value for the light to activate only in dark conditions, or a higher LUX value for activation even in twilight.
- SENS (Hassasiyet/Algılama Aralığı): This dial adjusts the sensitivity of the motion sensor, controlling the detection range. A higher sensitivity setting will detect motion over a wider area or at a greater distance.
Adjust these settings carefully to prevent false triggers or insufficient illumination. Test the settings after each adjustment.
6. Bakım
- Temizlik: Temizlemeden önce elektrik bağlantısını kesin. Yumuşak, kuru bir bez kullanın.amp cloth to wipe the floodlight's surface. Do not use abrasive cleaners or solvents, as they may damage the finish or seals.
- Denetleme: Periodically inspect the floodlight and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
- Sensör Alanı: Keep the sensor lens clean and free from obstructions (e.g., dirt, leaves, spiderwebs) to ensure optimal performance.
- LED Işık Kaynağı: The LED light source is not user-replaceable. If the LEDs fail, the entire fixture should be replaced by a qualified professional.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Işık açılmıyor. | No power supply. Incorrect wiring. LUX setting too high (daylight). Sensor obstructed. | Check power supply and circuit breaker. Verify wiring connections. Adjust LUX setting. Clear any obstructions from the sensor. |
| Işık sürekli açık kalır. | Continuous motion detected. TIME setting too long. LUX setting too low (always dark). Wiring fault. | Check for constant motion in the detection zone. Adjust TIME setting. Adjust LUX setting. Inspect wiring for shorts. |
| Light turns on and off frequently. | Intermittent motion. Sensor sensitivity too high. Interference from heat sources or reflections. | Adjust SENS setting. Relocate the floodlight if possible. Remove interfering objects. |
| Hareket sensörü algılamıyor. | Sensor obstructed. SENS setting too low. Incorrect mounting height/angle. | Clear obstructions. Adjust SENS setting. Re-evaluate mounting position and angle. |
If the problem persists after attempting these solutions, contact a qualified electrician or Ledvance customer support.
8. Teknik Özellikler
Image 3: Product packaging displaying key technical specifications.
| Şartname | Değer |
|---|---|
| Marka | Ledvance |
| Ürün Model Numarası | 4099854306884 |
| Ürün Boyutları | 20.1x5.7x21.9 cm |
| Malzeme | Alüminyum |
| Renk | Beyaz |
| Stil | Modern |
| Sona ermek | Beyaz |
| Dahil Bileşenler | Hareket Sensörü, Işık Sensörü |
| Belirli Kullanım | Path, Outdoor |
| Lampgölge Malzeme | Alüminyum |
| Işık Yönü | NEDEN OLMUŞ |
| Anahtar Stili | Hareket Sensörü |
| Kurulum Türü | Surface Mounted (Floor or Ceiling Mounting) |
| Piller Dahil Mi? | HAYIR |
| Lamp Tip | NEDEN OLMUŞ |
| AB Enerji Etiketi | 146 lm/W |
| Işık Akısı | 6000 lümen |
| Netage | 41 Vat |
| IP Derecelendirmesi | IP65 |
| IK Değerlendirmesi | IK07 |
| Renk Sıcaklığı | 4000K (Soğuk Beyaz) |
9. Garanti ve Destek
This Ledvance LED Floodlight comes with a 5 yıl garanti, as indicated on the product packaging. This warranty covers defects in materials and workmanship under normal use and service conditions.
For warranty claims, technical support, or further assistance, please contact Ledvance customer service through their official website or the retailer from whom you purchased the product. Please have your proof of purchase and the product model number (4099854306884) available when contacting support.
For more information, visit the official Ledvance webalan: www.ledvance.com