ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

1. Giriş

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

Resim: Üzeriview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. Ürün Özellikleri

• Eller Serbest Kontrolü: Automatically detects presence and ambient light to activate or deactivate lights.
• Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
• Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
• Evrensel Uyumluluk: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
• Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
• Kolay Kurulum: Fits standard junction boxes and requires a neutral wire.
• Dayanıklı Tasarım: Constructed with tough thermoplastic housing for impact and scratch resistance.

Resim: Ayrıntılı view of the product features and adjustable settings on the dimmer switch.

3. Güvenlik Bilgileri

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

• Bu cihaz, Ulusal Elektrik Yasasına ve yerel yönetmeliklere uygun olarak kurulmak üzere tasarlanmıştır.
• Bu kurulumu kalifiye bir elektrikçinin yapması tavsiye edilir.
• Sadece bakır kablo kullanın.
• A neutral wire is required for proper operation.
• This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. Paket İçeriği

• ECOELER Motion Sensor Dimmer Switch
• Duvar Plakası
• Kurulum Talimatları (bu kılavuz)
• Montaj Vidaları
• Kablo Kapakları

Görsel: Ürün boyutları ve dahil aksesuarlar.

5. Özellikler

Image: Universal compatibility with various bulb types and their wattage derecelendirme.

6. Kurulum

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 Ön Kurulum

1. Gücü Kapatın: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltage test cihazı.
2. Eski Anahtarı Kaldır: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
3. Kabloları Tanımlayın: Elektrik kutunuzdaki aşağıdaki kabloları belirleyin:
   • Hot (Line) Wire: Devre kesiciden gelen gücü taşır.
   • Yük Teli: Aydınlatma armatürüne bağlanır.
   • Nötr Tel: (Required) Typically white, often capped together with other neutral wires.
   • Topraklama kablosu: (Recommended) Typically bare copper or green.

6.2 Kablolama Talimatları

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

• Bağlan Siyah wire from the switch to the Hot (Line) Duvardan tel.
• Bağlan Kırmızı wire from the switch to the Yük Duvardan tel.
• Bağlan Beyaz wire from the switch to the Doğal Duvardan tel.
• Bağlan Yeşil wire from the switch to the Zemin Duvardan tel.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Montaj ve Son İşlemler

1. Carefully push all wired connections into the electrical box.
2. Mount the switch into the electrical box using the provided screws.
3. Duvar plakasını takın.
4. Devre kesiciden gücü tekrar AÇIN.