WINIX 5520 Hava Temizleyici Kullanım Kılavuzu

Ürün Bittiview

The Winix 5520 Air Purifier is designed to provide clean and healthy indoor air. It features a comprehensive 4-stage air purification system capable of capturing 99.99% of airborne allergens and pollutants as small as 0.01 microns. This includes dust, pollen, pet dander, and smoke. The unit incorporates Smart Sensors for real-time air quality monitoring and an Auto Mode for efficient operation. PlasmaWave® Technology further enhances air cleaning by breaking down pollutants at a molecular level.

Şekil 1: Ön view of the Winix 5520 Air Purifier.

Kurmak

1. Ambalajdan Çıkarma ve Filtre Hazırlığı

Before initial use, remove the air purifier from its packaging. Open the front panel to access the filters. The True HEPA filter and Carbon filter come sealed in plastic bags. It is crucial to remove these plastic bags before operating the unit. The washable Fine Mesh Pre-Filter does not come in a bag.

Figure 2: Filters being removed from the Winix 5520 Air Purifier for initial setup.

2. Filter Installation Order

1. Insert the True HEPA Filter first.
2. Place the Advanced Odor Control (AOC) Carbon Filter on top of the HEPA filter.
3. Finally, secure the Washable Fine Mesh Pre-Filter.

Ön paneli güvenli bir şekilde kapatın.

3. Yerleşim

Place the air purifier on a firm, level surface. Ensure there is at least 6-12 inches of space from walls or furniture to allow for optimal airflow. The unit is designed to clean rooms up to 1,882 sq ft in 1 hour (based on 1 Air Change Per Hour).

Figure 3: Optimal placement of the air purifier in a large room.

4. Güç Bağlantısı

Güç kablosunu standart bir elektrik prizine takın.

Kullanım Talimatları

Kontrol Paneli Bittiview

The Winix 5520 features capacitive touch buttons that illuminate upon touch. The control panel includes:

• Güç Düğmesi: Turns the unit On/Off. Plays a short tune when activated.
• Hava Kalitesi Göstergesi: An LED light bar on the front of the unit that visually displays real-time air quality.
• Fan Hızı Düğmesi: Toggles between four fan speed settings (Low, Medium, High, Turbo), Sleep Mode, and Auto Mode.
• Wi-Fi Düğmesi: Enables Wi-Fi connectivity for app control.
• PlasmaWave® Button: Activates or deactivates the PlasmaWave® Technology.
• Filtre Değişim Göstergesi: Illuminates when filters need replacement. Press and hold for 5 seconds to reset after filter replacement.

Hava Kalitesi Göstergesi

The air quality indicator provides immediate feedback on your indoor air quality:

• Kırmızı: Indicates poor air quality.
• Turuncu: Indicates fair air quality.
• Mavi: Indicates very good air quality.

Poor Air Quality (Red)

Fair Air Quality (Orange)

Good Air Quality (Blue)

Çalışma Modları

• Otomatik mod: The unit's built-in Smart Sensors detect and monitor the quality of air and automatically adjust fan speeds to ensure efficient cleaning.
• Uyku modu: Automatically activated when the room is darkened, providing quiet, energy-efficient operation by dimming LEDs and reducing fan speed.
• Manuel Fan Hızı: Cycle through Low, Medium, High, and Turbo speeds using the fan speed button.

Wi-Fi ve Uygulama Kontrolü

The Winix 5520 can be controlled remotely via the Winix Smart App. Press the Wi-Fi button on the unit to enable connectivity. Through the app, you can:

• Temizlik zamanlarını planlayın.
• Track air quality history in real-time.
• Toggle PlasmaWave® on/off.
• Fan hızlarını ayarlayın.
• Power the unit on/off.

Figure 4: Control your Winix 5520 via the Winix Smart App.

Bakım

Filtre Sistemi Üzerindenview

The Winix 5520 utilizes a 4-stage filtreleme sistemi:

1. Washable Fine Mesh Pre-Filter: Captures larger airborne particles. Clean approximately once a month.
2. Advanced Odor Control (AOC) Carbon Filter: Reduces VOCs and household odors. Helps prolong True HEPA Filter life.
3. Gerçek HEPA Filtre: Captures 99.99% of airborne allergens as small as 0.01 microns.
4. PlasmaWave® Technology: Breaks down pollutants at the molecular level.

Figure 5: Advanced 4-Stage Filtration with PlasmaWave® Technology.

Filtre Değişimi

The Filter Replacement Indicator LED will illuminate when the filters need to be replaced. The True HEPA and Carbon filters typically last up to one year, depending on usage and air quality.

1. Ön paneli açın.
2. Remove the used filters.
3. Insert the new filters in the correct order (HEPA first, then Carbon, then Pre-Filter).
4. Ön paneli kapatın.
5. Press and hold the Filter Replacement Indicator button for approximately 5 seconds to reset the indicator.

Sorun giderme

If your Winix 5520 Air Purifier is not operating as expected, please check the following:

• Güç Yok: Güç kablosunun çalışan bir elektrik prizine güvenli bir şekilde takıldığından emin olun.
• Azaltılmış Hava Akışı: Check if the filters are clean and properly installed. Ensure plastic bags have been removed from new filters.
• Alışılmadık Gürültü: Verify that no foreign objects are obstructing the fan.
• Hava Kalitesi Göstergesinde Değişiklik Yok: Ensure the air quality sensor is clean.
• Wi-Fi Bağlantı Sorunları: Refer to the Winix Smart App instructions for troubleshooting connection problems.

For persistent issues, please contact Winix customer support.

Özellikler

Figure 6: Dimensions of the Winix 5520 Air Purifier.

Garanti ve Destek

Garanti Bilgileri

The Winix 5520 Air Purifier is backed by a 2 yıllık garanti. Winix will repair or replace your unit if it meets the qualifying conditions.

Ek Destek

For further assistance, you may refer to the official user manual PDF: Winix 5520 User Manual (PDF).

Visit the official Winix Store for more products and support: Amazon'da Winix Mağazası.