RAINPOINT Irrigation Computer User Manual

1. Giriş

Thank you for choosing the RAINPOINT Irrigation Computer. This device is designed to simplify your garden watering tasks with its advanced features and user-friendly interface. It allows for precise control over watering schedules across multiple zones, ensuring optimal hydration for your plants while conserving water.

Please read this manual thoroughly before operating the device to ensure proper installation, programming, and maintenance. Keep this manual for future reference.

2. Ürün Bittiview

2.1 Bileşenler

The RAINPOINT Irrigation Computer features a robust design with a large LCD display and intuitive controls. Key components include:

• Ana Ünite: Houses the control panel, LCD display, and battery compartment.
• Brass Inlet: Durable connection point for your water source, compatible with 3/4 and 1-inch hoses/taps.
• Üç Bağımsız Satış Noktası: Allows for connection of up to three separate watering zones.
• Kontrol Kadranı: Used for navigating through settings and modes.
• Düğmeler: OK/Manual, Delay/+, Zone/-, used for specific functions and adjustments.

Şekil 2.1: Ön view of the RAINPOINT Irrigation Computer, showing the large LCD display, control dial, and three outlets at the bottom.

Şekil 2.2: Ayrıntılı view of the enhanced water inlet, featuring a reinforced brass connection and an integrated metal filter for durability and clean water flow.

2.2 Temel Özellikler

• 3 Independent Zones: Program distinct watering schedules for up to three different areas.
• Enhanced Timer Performance: Durable brass inlet and reinforced solenoid valve for stable water flow.
• Yağmur Geciktirme Fonksiyonu: Pause watering for 24, 48, or 72 hours to prevent overwatering during rainfall.
• Manuel Sulama Modu: Initiate immediate watering without affecting programmed schedules.
• Büyük LCD Ekran: Clear and easy-to-read screen for programming and monitoring.
• Düşük Pil Koruması: Alerts for low battery and automatically shuts off the valve to prevent water waste.

3. Kurulum

3.1 Pil Kurulumu

The irrigation computer requires 4 AA 1.5V batteries (not included). To install:

1. Ünitenin arkasındaki pil bölmesini bulun.
2. Gently pull up the two tabs on the back cover to open the compartment.
3. 4 adet AA pili, kutupların doğru olmasına dikkat ederek (+/-) takın.
4. Close the battery compartment securely, pressing down until the tabs click into place.

Note: The LCD screen will activate upon successful battery installation.

3.2 Installation to Faucet

Before connecting, ensure your faucet is clean and free of debris.

1. Attach the brass inlet of the irrigation computer to your outdoor faucet. Ensure the included sealing washer is properly seated to prevent leaks.
2. Tighten the connection by hand until secure. Do not overtighten.
3. Connect your garden hoses to the three independent outlets at the bottom of the unit. Ensure each hose is securely fastened.

Figure 3.1: Installation of the irrigation computer to a standard outdoor faucet, highlighting the ergonomic design for easy handling.

4. Kullanım Talimatları

4.1 Saati Ayarlama

1. Kontrol kadranını konumuna çevirin SAAT AYARLA.
2. Kullanın +/- buttons to adjust the current hour. Press Tamam/MANUEL onaylamak için.
3. Kullanın +/- buttons to adjust the current minute. Press Tamam/MANUEL onaylamak için.
4. Saat artık ayarlanmıştır.

4.2 Programming Watering Schedules (Automatic Mode)

Each of the three zones can be programmed independently. The device will execute plans for one zone at a time to maintain water pressure.

Figure 4.1: The LCD display illustrating the customizable settings for watering schedules, including start time, duration, and frequency.

1. Kontrol kadranını konumuna çevirin BAŞLANGIÇ ZAMANI.
2. Basın ZONE +/- button to select the zone you wish to program (ZONE 1, 2, or 3).
3. Kullanın +/- buttons to set the desired start time for the selected zone. Press Tamam/MANUEL onaylamak için.
4. Kontrol kadranını konumuna çevirin NE KADARDIR.
5. Ensure the correct zone is selected using ZONE +/-. Kullanın +/- buttons to set the watering duration (from 1 minute to 4 hours). Press Tamam/MANUEL onaylamak için.
6. Kontrol kadranını konumuna çevirin NE SIKLIKTA.
7. Ensure the correct zone is selected using ZONE +/-. Kullanın +/- buttons to set the watering frequency (from 1-12 hours or 1-7 days). Press Tamam/MANUEL onaylamak için.
8. Repeat steps for other zones as needed.
9. Kontrol kadranını konumuna çevirin ON to activate the programmed schedules.

Important Note: The device can only execute the plan for one zone at a time. If there is a conflict in activation plans for multiple zones, only one zone will operate, and the others will wait for the previous zone's execution to complete before starting. This ensures optimal water pressure for each zone.

4.3 Manuel Sulama

To initiate immediate watering without affecting your programmed schedules:

Figure 4.2: A user demonstrating manual watering, with the display showing options to select and activate specific zones for immediate watering.

1. Kontrol kadranını konumuna çevirin ON.
2. Basın Tamam/MANUEL button. The display will show "MANUAL".
3. Kullanın ZONE +/- button to select the zone you wish to water manually.
4. Kullanın +/- buttons to set the desired manual watering duration (from 1 minute to 8 hours).
5. Basmak Tamam/MANUEL Manuel sulamayı başlatmak için.
6. Manuel sulamayı durdurmak için basın. Tamam/MANUEL tekrar veya kadranı çevirin KAPALI.

4.4 Yağmur Geciktirme Fonksiyonu

The rain delay function allows you to temporarily suspend your watering schedule for a set period, preventing overwatering during rainy conditions.

Figure 4.3: The irrigation computer displaying the rain delay options, allowing users to pause watering for 24, 48, or 72 hours.

1. Kontrol kadranını konumuna çevirin ON.
2. Basın GECİKME/+ button. The display will show "DELAY".
3. Kullanın +/- buttons to select the desired delay duration (24H, 48H, or 72H).
4. Basmak Tamam/MANUEL to activate the rain delay. The timer will automatically resume its schedule after the selected delay period.
5. Yağmur nedeniyle oyunun ertelenmesini iptal etmek için tuşuna basın. GECİKME/+ again and select "0H" or turn the dial to KAPALI ve sonra geri dön ON.

4.5 Turning Off the Device

To stop all watering and programming, turn the control dial to KAPALI. This will suspend all active schedules until the dial is turned back to ON.

5. Bakım

• Pil Değişimi: Replace batteries when the low battery indicator appears on the LCD. The valve will automatically shut off when batteries are critically low to prevent water waste.


Figure 5.1: The display indicating a low battery reminder and the automatic shut-off feature to conserve water.

• Temizlik: Periodically clean the brass inlet filter to prevent debris from entering the unit and affecting water flow. Remove the filter, rinse it under running water, and reinsert.
• Kış Deposu: During freezing temperatures, remove the irrigation computer from the faucet and store it indoors in a dry, frost-free location. Remove batteries before storage.
• Vana Bakımı: The improved coil valve design minimizes shock and ensures smoother water flow. No specific user maintenance is required for the internal valve beyond keeping the inlet filter clean.

Figure 5.2: Visual comparison highlighting the structural design improvements of the upgraded coil valve, leading to less water pressure loss compared to older valve types.

6. Sorun Giderme

7. Özellikler

8. Garanti ve Destek

RAINPOINT offers lifetime support for this product. If you require further assistance, have questions, or encounter any issues not covered in this manual, please contact RAINPOINT customer service.

For warranty information and to register your product for a 5-year guarantee, please refer to the contact details provided with your purchase or visit the official RAINPOINT webalan.