1. Giriş
The JOYO Orthros Selector JF-24 is a versatile line selector guitar pedal designed to enhance your guitar rig by offering two independent effect loops and multiple looping modes. This device allows for flexible integration of various effects pedals and digital devices, providing greater control over your sound. This bundle also includes a JOYO DC 9V 500mA power adapter, ensuring reliable power for your pedal.
Image 1: JOYO Orthros Selector JF-24 Guitar Pedal
2. Paket İçeriği
Lütfen paket içeriğini kontrol ederek tüm öğelerin mevcut olduğundan emin olun:
- JOYO Line Selector Guitar Pedal (ORTHROS SELECTOR JF-24)
- JOYO DC 9V 500mA Pedal Power Supply Adapter
3. Kontroller ve İşlevler
The JF-24 features intuitive controls for managing your effect loops:
- 1. LINE A LEVEL Control Knob: Adjusts the output level of Line A.
- 2. LINE B LEVEL Control Knob: Adjusts the output level of Line B.
- 3. LINE Mode Selection Control Knob: Selects one of the six available looping modes.
- Ayak pedalı: Engages or bypasses the selected effect loop(s) or switches between outputs depending on the mode.
- Giriş jakı: Connect your guitar or the output of previous pedals in your signal chain here.
- ÇIKIŞ Jakı: Bağlanın amplifier or the input of subsequent pedals.
- SEND A / RETURN A Jacks: For connecting effects pedals to Line A.
- SEND B / RETURN B Jacks: For connecting effects pedals to Line B.
- DC 9V Girişi: For connecting the included 9V DC power adapter.
Image 2: Labeled controls of the JF-24 pedal
4. Kurulum
4.1. Güç Bağlantısı
Connect the included DC 9V 500mA power adapter to the DC 9V input jack on the pedal. Ensure the adapter is center-negative. Using an incorrect power supply can damage the unit.
4.2. Enstrüman Bağlantısı
Connect your guitar to the INPUT jack of the JF-24. Connect the OUTPUT jack of the JF-24 to your ampAmplifikatör veya sinyal zincirinizdeki bir sonraki pedal.
Image 3: JF-24 connected in a basic setup
4.3. Connecting Effect Loops
The JF-24 features two independent effect loops, Line A and Line B. To connect pedals to a loop:
- Bağlan GÖNDER jack to the input of the first pedal in your Line A effect chain.
- Connect the output of the last pedal in your Line A effect chain to the RETURN A kriko.
- Repeat the process for Line B using the SEND B Ve RETURN B krikolar.
Image 4: Diagram showing two line loops (A and B) for connecting effects
5. Çalışma Modları
The JF-24 offers six looping modes, selectable via the LINE Mode Selection Control Knob. These modes allow for various configurations of your effect loops:
- 1. A/B: Switches between Line Loop A and Line Loop B.
- 2. A/BYPASS: Switches between Line Loop A and a bypassed signal (dry guitar signal).
- 3. B/BYPASS: Switches between Line Loop B and a bypassed signal (dry guitar signal).
- 4. A/B/BYPASS: Cycles through Line Loop A, Line Loop B, and a bypassed signal.
- 5. A+B/BYPASS: Switches between both Line Loop A and Line Loop B engaged simultaneously, and a bypassed signal.
- 6. A/B/OUT SELECT: This mode allows you to use the SEND A, SEND B, and OUTPUT jacks as three independent outputs. Your guitar signal goes into the INPUT, and you can switch between sending it to SEND A, SEND B, or the main OUTPUT. This is useful for routing your signal to different amplifiers (e.g., guitar amp, bas amp, tuner) or other destinations. In this mode, the RETURN A and RETURN B jacks are not used for effect loops.
Image 5: Diagram illustrating the 6 looping modes
6. Özellikler
- Modeli: JF-24
- Bağlantı Tipi: 1/4" Mono Jack, 2.1mm Barrel Connector
- Sinyal Formatı: Analog
- Güç Kaynağı: Corded Electric (DC 9V, center negative)
- Cilttage: 9 Volt (DC)
- Güncel Tüketim: 22mA
- Kontrol Türü: Footswitch, Rotary Knobs
- Boyutlar (yaklaşık): 120 mm (4.72 inç) x 97 mm (3.81 inç) x 55 mm (2.17 inç)
Image 6: Dimensions and power supply tips for the JF-24
7. Güç Adaptörü Bilgileri
The included JOYO DC 9V 500mA Pedal Power Adapter is designed with smart and professional IC chips for noise reduction and isolated safe protection performance. It is compatible with most pedals requiring a tip-negative 9V power supply.
Image 7: Features of the included DC 9V 500mA power adapter
7.1. Uyumluluk
The JF-24 is designed to work with a wide range of effect pedals. The power adapter is also compatible with most brands of pedals requiring a tip-negative 9V power supply.
Image 8: JF-24 compatibility with various pedal brands
8. Sorun Giderme
- Ses Yok: Ensure all cables are securely connected to the correct input/output jacks. Verify the power adapter is properly connected and supplying power. Check the volume levels on your guitar, pedal, and ampcankurtaran.
- Unexpected Noise: Ensure all connections are tight. Use a high-quality, isolated power adapter to minimize noise. If using multiple pedals, ensure they are properly grounded.
- Pedal Devreye Girmiyor: Check the selected operating mode. Some modes may require specific configurations for the footswitch to activate loops.
- Tone Loss: If you experience tone loss when a pedal is off but still in a loop, consider placing that pedal in one of the JF-24's loops and using the selector to bypass it completely when not in use.
9. Bakım
To ensure the longevity and optimal performance of your JOYO Orthros Selector JF-24:
- Pedalı temiz tutun ve tozdan ve kirden arındırın. Temizlik için yumuşak, kuru bir bez kullanın.
- Pedalları aşırı sıcaklıklara, neme veya doğrudan güneş ışığına maruz bırakmaktan kaçının.
- Do not attempt to disassemble or modify the pedal, as this may void the warranty and cause damage.
- Always use the correct power supply (DC 9V, center negative) to prevent damage.
10. Garanti ve Destek
For warranty information, technical support, or service inquiries, please refer to the official JOYO website or contact your authorized JOYO dealer. Keep your purchase receipt as proof of purchase for warranty claims.
