1. Giriş
This user manual provides essential information for the safe and effective operation of your Monport 50W Fiber Laser Engraver, Model YXF50. This integrated mini fiber laser marking machine is designed for high-precision engraving and marking on various metal and non-metal materials. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.
Figure 1.1: Monport 50W Fiber Laser Engraver, Model YXF50.
2. Güvenlik Bilgileri
WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always follow safety precautions.
2.1 Genel Güvenlik Yönergeleri
- Göz Koruması: Always wear certified laser safety glasses appropriate for the laser's wavelength (1064nm) when the machine is in operation.
- Cilt Koruması: Cildin lazer ışınına doğrudan maruz kalmasından kaçının.
- Havalandırma: Ensure adequate ventilation in the work area to remove fumes and particles generated during engraving. Consider a fume extractor.
- Yangın Güvenliği: Keep a fire extinguisher nearby. Do not engrave flammable materials without proper precautions.
- Nezaret: Çalışma sırasında makineyi asla gözetimsiz bırakmayın.
- Yetkili Personel: Only trained and authorized personnel should operate the laser engraver.
- Acil durdurma: Acil durdurma butonunun yerini ve çalışma şeklini öğrenin.
2.2 Elektrik Güvenliği
- Makinenin uygun şekilde topraklandığından emin olun.
- Islak ellerle veya ıslakken çalıştırmayın.amp koşullar.
- Herhangi bir bakım veya ayarlama yapmadan önce gücü kesin.
3. Kurulum ve Kurulum
The Monport 50W Fiber Laser Engraver is designed for straightforward setup. Follow these steps to prepare your machine for operation.
3.1 Paketin Açılması ve Muayene
- Tüm bileşenleri dikkatlice ambalajından çıkarın.
- Inspect the machine for any signs of damage during transit. Report any damage to Monport support immediately.
- Verify all accessories listed in the packing list are present.
3.2 Montaj
The integrated design minimizes assembly. Typically, this involves securing the laser head column to the base unit.
- Place the base unit on a stable, level surface.
- Attach the vertical column with the laser head to the designated mounting points on the base. Secure it firmly using the provided screws.
- Connect any necessary cables (power, USB) as indicated in the quick start guide included with your machine.
Figure 3.1: Compact design and key specifications of the Monport 50W Fiber Laser Engraver.
3.3 Yazılım Kurulumu
Your Monport 50W Fiber Laser Engraver is compatible with LightBurn and BSLcad software. Installation files and backup parameters are typically provided on a USB drive included in the packaging.
- Verilen USB belleği bilgisayarınıza takın.
- Follow the instructions on the USB drive to install your preferred software (LightBurn or BSLcad).
- Install the necessary drivers for the laser engraver to communicate with your computer.
- Configure the software according to the provided parameters for your specific machine model (YXF50).
4. Kullanım Talimatları
This section outlines the basic steps for operating your Monport 50W Fiber Laser Engraver.
4.1 Açma ve İlk Kontroller
- Lazer güvenlik gözlüğü takmak da dahil olmak üzere tüm güvenlik önlemlerinin alındığından emin olun.
- Connect the power cable and turn on the main power switch on the machine.
- Launch the engraving software (LightBurn or BSLcad) on your computer.
- Verify that the software recognizes the laser engraver.
4.2 Malzeme Yerleşimi ve Odaklama
- Place your material on the work platform.
- Adjust the Z-axis (height of the laser head) until the laser is properly focused on the material surface. The machine features a red dot pointer to assist with focusing and positioning.
- Önemli: Remember to remove the lens cap before operation.
Figure 4.1: Optimal marking area of 150x150mm for the 50W fiber laser.
4.3 Software Operation and Engraving
- Tasarımı yazılıma aktarın veya yazılım içinde oluşturun.
- Set engraving parameters such as power, speed (up to 10000mm/s), frequency, and passes based on the material and desired effect.
- Use the software's framing function to preview the engraving area on your material.
- Initiate the engraving process. Monitor the machine closely during operation.
Şekil 4.2: Üzeriview of key features including 10000mm/s speed and 50W power.
Figure 4.3: Illustration of the 0.01mm ultra-fine spot precision.
4.4 Uyumlu Malzemeler
The Monport 50W Fiber Laser Engraver is suitable for marking and engraving a wide range of materials:
- Metaller: Gold, Silver, Copper, Stainless Steel, Brass, Titanium, Aluminum, Platinum, etc.
- Plastikler: Certain types of plastics.
- Diğer: Some ceramics, leather, painted metals.
Şekil 4.4: Ör.amples of materials compatible with the fiber laser engraver.
5. Bakım
Regular maintenance ensures optimal performance and extends the lifespan of your Monport 50W Fiber Laser Engraver.
5.1 Lensin Temizlenmesi
The F-theta field lens is a critical component. Keep it clean to maintain engraving quality.
- Sıklık: Clean the lens regularly, especially if you notice a decrease in engraving quality or power.
- İşlem: Use a specialized lens cleaning solution and lint-free wipes. Avoid touching the lens surface with bare hands.
5.2 Genel Temizlik
- Keep the work area and the machine's exterior free of dust and debris.
- Ensure ventilation grilles are not obstructed.
5.3 Yazılım Güncellemeleri
Periodically check for software updates for LightBurn or BSLcad to benefit from new features and performance improvements.
6. Sorun Giderme
Bu bölüm karşılaşabileceğiniz yaygın sorunları ele alıyor ve olası çözümler sunuyor.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Lazer çıkışı yok | Lens cap still on, emergency stop engaged, power issue, software not connected. | Remove lens cap, disengage emergency stop, check power connections, verify software connection. |
| Kötü gravür kalitesi | Incorrect focus, dirty lens, incorrect power/speed settings, material not suitable. | Adjust focus, clean lens, optimize engraving parameters, ensure material compatibility. |
| Machine not recognized by software | USB cable issue, driver not installed, software configuration error. | Check USB cable, reinstall drivers, verify software settings. |
| Red dot pointer not visible | Pointer disabled in software, hardware malfunction. | Enable pointer in software settings. If issue persists, contact support. |
7. Özellikler
Key technical specifications for the Monport 50W Fiber Laser Engraver (Model YXF50):
- Modeli: YXF50
- Lazer Tipi: Fiber Lazer
- Lazer Gücü: 50W (50000 mW output power)
- Lazer Sınıfı: Sınıf 4
- Maks. Markalama Hızı: 10000 mm/s
- Gravür Doğruluğu: 0.01mm
- Çalışma Alanı: 150 mm x 150 mm (5.9" x 5.9")
- Max Z-Height: 350mm
- Ömür: 100,000 saate kadar
- Uyumlu Yazılım: LightBurn, BSLcad
- Uyumlu İşletim Sistemleri: Windows, macOS
- Ürün Ağırlığı: 14.5 kg (34 lbs)
- Malzeme: Alüminyum
- Renk: Gri
- Çalışma Modu: Manuel
Figure 7.1: Speed capabilities of the Monport 50W Fiber Laser Engraver.
8. Garanti ve Destek
8.1 Garanti Bilgileri
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Monport webSite. Satın alma belgenizi garanti talepleriniz için saklayın.
8.2 Müşteri Desteği
If you encounter any issues not covered in this manual or require technical assistance, please contact Monport customer support. You can find contact information on the official Monport websiteniz veya satın alma platformunuz aracılığıyla.
Monport Direct: Satıcı Bilgileri
Figure 8.1: Optional accessories for enhanced functionality and safety.
