RDINSCOS MT28C Pinless Moisture Meter User Manual

1. Giriş

The RDINSCOS MT28C is a non-invasive, pinless moisture meter designed for quick and accurate detection of moisture content in various building materials and wood. This device utilizes advanced sensor technology to measure moisture up to 0.75 inches (19mm) deep without causing damage to surfaces. Its large color LCD and LED bar graph provide clear, easy-to-read data, making it an essential tool for homeowners, contractors, and DIY enthusiasts for identifying potential moisture problems.

2. Güvenlik Bilgileri

• Cihazı kullanmadan önce tüm talimatları dikkatlice okuyun.
• Cihazı aşırı sıcaklıklara, neme veya doğrudan güneş ışığına maruz bırakmayın.
• Cihazınızı su ve diğer sıvılardan uzak tutunuz.
• Cihazı açmaya veya değiştirmeye çalışmayın. Tüm servis işlemlerini yetkili personele yaptırın.
• Pilleri yerel düzenlemelere göre atın.
• Avoid placing the meter near strong electromagnetic fields, as this may affect readings.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• 1 x RDINSCOS MT28C Pinless Moisture Meter
• 1 x 9V Pil
• 1 x Kullanım Kılavuzu
• 1 x Saklama Çantası

4. Ürün Özellikleri

• Pinless Measurement: Non-invasive detection of moisture up to 0.75 inches (19mm) deep, preventing damage to surfaces.
• Geniş Uygulama: Suitable for various materials including walls, masonry, softwood, hardwood, plaster, and concrete.
• Ekranı Temizle: Large color LCD with backlight and a three-color LED bar graph for easy data interpretation (Dry, Mid, Wet).
• Over-range Alarm: Automatic alarm indicates when moisture levels exceed predefined thresholds.
• Veri Tutma Fonksiyonu: Allows users to lock abnormal readings for later review ve analiz.
• Entegre El Feneri: Built-in LED for improved visibility in dimly lit areas.
• Pil ile çalışır: Operates on a 9V battery for portability.

5. Kurulum

5.1 Pil Kurulumu

1. Cihazın arkasındaki pil bölmesi kapağını bulun.
2. Open the battery compartment. No screws are typically needed for access.
3. Insert the included 9V battery, ensuring correct polarity (+/-).
4. Pil bölmesi kapağını sıkıca kapatın.

Şekil 5.1: Arka view of the MT28C meter, indicating the battery compartment. Ensure the 9V battery is installed correctly.

6. Kullanım Talimatları

6.1 Açma/Kapatma

Press the power button (usually marked with a power symbol) to turn the device on. Press and hold the power button to turn it off. The device may also have an auto-off feature to conserve battery life.

6.2 Ölçüm Modunun Seçilmesi

Press the "MODE" button to cycle through different material types: Wall, Masonry, Softwood, Hardwood. Select the mode that best matches the material you are testing for accurate readings.

Figure 6.1: The MT28C meter can measure moisture up to 0.75 inches (19mm) deep and supports various material types including wall, masonry, softwood, and hardwood.

6.3 Bir Ölçüm Yapma

1. Doğru malzeme modunun seçildiğinden emin olun.
2. Place the back of the meter flat against the surface you wish to measure.
3. Apply a consistent, firm pressure (approximately 2.5 KG is recommended for accurate results, as shown in Figure 6.3).
4. nem yüzdesitagLCD ekranda e görüntülenecektir.

Figure 6.2: Scan an area by moving the meter across the surface to compare relative moisture content.

Figure 6.3: For accurate results, apply approximately 2.5 KG of pressing force when taking measurements.

6.4 Interpreting Readings

The color LCD and LED bar graph provide visual indicators of moisture levels:

• Green (DRY): Indicates low moisture content.
• Yellow (MID): Indicates moderate moisture content.
• Red (WET): Indicates high moisture content, potentially requiring further investigation.

Figure 6.4: The display clearly indicates moisture levels as DRY, MID, or WET using color-coded indicators.

Note: The measured value is relative. When scanning an area quickly to detect moisture, use the HOLD key to lock abnormal readings for recording and analysis.

Important: Testing on pure drywall is not recommended as its low density can lead to inaccurate readings. Actual readings vary with moisture and material density.

6.5 Tutma İşlevi

Press the "HOLD" button to freeze the current reading on the display. This is useful for noting down specific measurements or when measuring in hard-to-reach areas. Press the "HOLD" button again to release the reading and resume live measurement.

7. Bakım

• Temizlik: Cihazı yumuşak ve kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Depolamak: Store the meter in its provided storage bag in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.
• Pil Değişimi: Ekranda düşük pil göstergesi belirdiğinde 9V pili değiştirin.

8. Sorun Giderme

9. Özellikler

10. Garanti ve Destek

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official RDINSCOS website. Herhangi bir garanti talebi için satın alma belgeniz olarak satın alma makbuzunuzu saklayın.