1. Giriş
This manual provides essential information for the safe and effective use of the FUTABA LBC-34D(P) LiFe Battery Charger. This charger is specifically designed for LiFe (Lithium Iron Phosphate) batteries used in compatible FUTABA radio control transmitters. Please read this manual thoroughly before use to ensure proper operation and to prevent damage to the charger or battery.
Image: The FUTABA LBC-34D(P) LiFe Battery Charger. This image shows the compact design of the charger, typically featuring input and output ports.
2. Güvenlik Bilgileri
Uyarı: Bu güvenlik talimatlarına uyulmaması yangına, elektrik çarpmasına, yaralanmaya veya ürüne ya da mülke zarar verilmesine neden olabilir.
- Use this charger sadece with the designated LiFe transmitter batteries. Using it with other battery types (e.g., LiPo, NiMH, NiCd) can cause severe damage, fire, or explosion.
- Hasarlı veya şişmiş pilleri şarj etmeye çalışmayın.
- Always supervise the charging process. Do not leave batteries unattended while charging.
- Şarj cihazını sudan, nemden ve yanıcı maddelerden uzak tutun.
- Do not short-circuit the charger's output terminals or the battery terminals.
- Do not modify, disassemble, or attempt to repair the charger. Refer all servicing to qualified personnel.
- Şarj sırasında uygun havalandırmayı sağlayın.
- Çocukların erişemeyeceği yerde saklayınız.
3. Paket İçeriği
- FUTABA LBC-34D(P) LiFe Battery Charger Main Unit
4. Kurulum
Follow these steps to set up your LBC-34D(P) charger:
- Güç Kaynağına Bağlan: Connect the charger's input cable to a stable 12V DC power source. Ensure the power source can provide sufficient current for charging.
- Pili bağlayın: Carefully connect your compatible LiFe transmitter battery to the charger's output port. Ensure the polarity is correct. The charger is designed for a 7.2V output.
- Bağlantıyı Doğrulayın: Double-check all connections to ensure they are secure before proceeding.
5. Kullanım Talimatları
Once the charger is connected to a power source and the battery is attached:
- Şarj cihazı otomatik olarak şarj işlemini başlatacaktır.
- Observe any indicator lights on the charger (if present) to monitor the charging status. Typically, a light may change color or turn off when charging is complete. Refer to the specific indicator behavior for your charger model.
- Once charging is complete, disconnect the battery from the charger, then disconnect the charger from the power source.
6. Uyumluluk
The FUTABA LBC-34D(P) LiFe Battery Charger is compatible with LiFe batteries used in the following FUTABA transmitter models:
CAR Series Transmitters:
- 10PX
- 7PXR
- 7PX
- 7XC
- 4PXR
- 4PX
- 4PKS
- 4PK
- 4:XNUMX
- 4PV
- 4GRS
- 3PV
AIR Series Transmitters:
- 18SZ
- 16SZ
- 14SG
- 12K
- 10J
- 8J
- 6J
- 6K
7. Özellikler
| Marka | Futaba Denshi |
| Model Numarası | LBC-34D(P) |
| Ürün Boyutları | 10x8x2 cm |
| Ürün Ağırlığı | 95 gr |
| Malzeme | Plastik |
| Giriş Voltage | 12V |
| Çıkış Hacmitage | 7.2V |
| Dahil Bileşenler | Ana Ünite |
8. Bakım
To ensure the longevity and proper functioning of your LBC-34D(P) charger:
- Temizlik: Disconnect the charger from all power sources and batteries before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Depolamak: Şarj cihazınızı serin ve kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın.
- Denetleme: Periodically inspect the charger and its cables for any signs of damage, such as frayed wires or cracked casing. Hasarlıysa kullanmayın.
9. Sorun Giderme
Şarj cihazınızla ilgili sorun yaşıyorsanız, aşağıdakileri göz önünde bulundurun:
- Şarj Cihazı Açılmıyor: Ensure the 12V DC power source is functioning correctly and the input cable is securely connected.
- Pil Şarj olmuyor:
- Verify that the battery is a compatible LiFe type.
- Check that the battery is correctly connected to the charger with proper polarity.
- Pilde gözle görülür bir hasar olup olmadığını kontrol edin. Hasarlı pilleri şarj etmeye çalışmayın.
- Unusual Heat or Smell: Immediately disconnect the charger from the power source and battery. Do not use the charger or battery if you notice excessive heat, smoke, or an unusual smell.
If problems persist after checking these points, contact customer support for assistance.
10. Garanti ve Destek
For warranty information, please refer to the documentation provided at the time of purchase or visit the official FUTABA website. For technical support or inquiries, please contact your retailer or the manufacturer's customer service department.
