Anderic RRTR214D

Anderic RRTR214D Ceiling Fan Remote Control

Kullanım Kılavuzu

Model: RRTR214D | Brand: Anderic

1. Giriş

The Anderic RRTR214D (TR214D) Ceiling Fan Remote Control is engineered as a direct replacement for various Harbor Breeze remote models. This manual provides essential information for setting up, operating, and maintaining your new remote control, ensuring seamless integration and optimal performance with your compatible ceiling fan.

2. Uyumluluk

The Anderic RRTR214D remote control is designed to seamlessly replace the following Harbor Breeze remote models:

  • A25-FA0138
  • KUJCE10311
  • TR214B
  • KUJCE10712
  • TR214A
  • KUJCE10610

This remote is specifically designed for these models and cannot be paired with other ceiling fan receivers not originally supplied with these models. Please verify your existing remote's model number for compatibility.

Anderic RRTR214D remote next to a list of compatible Harbor Breeze ceiling fan models.

Image: The Anderic RRTR214D remote control shown alongside a list of compatible Harbor Breeze ceiling fan models, emphasizing seamless integration.

3. Temel Özellikler

  • Doğrudan Değişim: Seamlessly replaces specified Harbor Breeze remote models.
  • Zahmetsiz Eşleştirme: Designed for easy setup with your existing receiver.
  • Kapsamlı Kontrol: Offers full control over fan speeds (high, medium, low, off) and light functions (on/off and dimming).
  • Pil ile çalışır: Operates on a single 23A 12-volt battery (not included).
  • Convenient Wall Mount: Includes a wall mount for easy storage and accessibility.
Ön ve arka view of the Anderic RRTR214D remote control with its included wall mount.

Resim: Net view of the Anderic RRTR214D remote control, showing both its front with control buttons and its back, along with the included wall mount for convenient storage.

4. Kurulum Talimatları

4.1. Pil Kurulumu

The Anderic RRTR214D remote requires one 23A 12-volt battery (not included).

  1. Uzaktan kumandanın arkasındaki pil bölmesini bulun.
  2. Pil kapağını kaydırarak açın.
  3. Insert one 23A 12-volt battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Pil kapağını sıkıca kapatın.

4.2. Effortless Pairing

Follow these simple steps to pair your Anderic RRTR214D remote with your ceiling fan receiver:

  1. Cycle Power to the Fan: Turn off the power to your ceiling fan at the wall switch or circuit breaker, then turn it back on. This resets the receiver for pairing.
  2. Install Battery in the Remote: Ensure the 23A 12-volt battery is correctly installed in the remote control.
  3. Press and Hold the "0" Key: Within 30 seconds of restoring power to the fan, press and hold the "0" (fan off) button on the remote control for approximately five seconds. The fan light should blink or the fan should respond, indicating successful pairing.

If pairing is unsuccessful, repeat the steps. Ensure you are within close proximity to the fan during the pairing process.

Diagram showing battery installation and the 3-step pairing process for the Anderic RRTR214D remote.

Image: A visual guide illustrating how to install the 23A 12-volt battery into the remote and the three-step process for effortless pairing with a ceiling fan.

4.3. Duvara Montaj Kurulumu

The included wall mount allows for convenient storage and quick access to your remote.

  1. Doğrudan güneş ışığından veya ısı kaynaklarından uzak, duvarda uygun bir yer seçin.
  2. Use screws (not included) to secure the wall mount to the desired surface.
  3. Slide the remote control into the wall mount for secure storage.
Image showing the wall mount for the Anderic RRTR214D remote and how it can be installed on a wall.

Image: The Anderic RRTR214D remote's wall mount is highlighted, demonstrating how it can be installed on a wall for easy access and to prevent misplacement.

5. Kullanım Talimatları

The Anderic RRTR214D remote provides comprehensive control over your ceiling fan's functions:

  • Işık Düğmesi: Press to turn the light ON or OFF. Hold to dim or brighten the light (if your fan supports dimming).
  • Fan Hızı Düğmeleri:
    • 1: Fan speed LOW
    • 2: Fan hızı ORTA
    • 3: Fan hızı YÜKSEK
  • 0 (Fan Off) Button: Fanı KAPATMAK için basın.
Diagram illustrating the functions of each button on the Anderic RRTR214D remote for fan speed and light control.

Image: A visual representation of the Anderic RRTR214D remote's buttons, detailing their functions for adjusting fan speeds (low, medium, high, off) and controlling light (on/off/dimming).

6. Bakım

Uzaktan kumandanızın uzun ömürlü ve en iyi performansı göstermesi için aşağıdaki bakım yönergelerini izleyin:

  • Pil Değişimi: Replace the 23A 12-volt battery when the remote's range decreases or it becomes unresponsive. Always use a fresh battery of the specified type.
  • Temizlik: Kumandayı yumuşak, kuru bir bezle silin. Aşındırıcı temizleyiciler kullanmayın veya kumandayı suya batırmayın.
  • Depolamak: Store the remote in a cool, dry place when not in use for extended periods. Remove the battery if storing for several months to prevent leakage.

7. Sorun Giderme

If you encounter issues with your Anderic RRTR214D remote control, refer to the following common problems and solutions:

  • Uzaktan Kumanda Yanıt Vermiyor:
    • Pili kontrol edin. Doğru takıldığından ve yeterli şarjı olduğundan emin olun. Gerekirse değiştirin.
    • Ensure you are within the operating range of the ceiling fan receiver.
  • Eşleştirme Sorunları:
    • Confirm that your ceiling fan receiver is one of the compatible models listed in Section 2.
    • Repeat the pairing steps carefully (Section 4.2), ensuring you cycle power to the fan and press the "0" button within the specified timeframe.
    • Ensure no other remote controls are interfering with the pairing process.
  • Fan or Light Functions Not Working:
    • Verify that the remote is successfully paired.
    • Check the fan's pull chains (if applicable) to ensure the fan speed or light is set to the 'on' position for remote operation.

If problems persist after attempting these solutions, please contact Anderic customer support for further assistance.

8. Özellikler

ÖzellikDetay
Model NumarasıRRTR214D
Ürün Boyutları1.7 x 3.9 x 0.9 inç
Ürün Ağırlığı1.12 ons
Pil Türü1 x 23A 12-volt (not included)
RenkBeyaz
Özel ÖzellikÖnceden Programlanmış
Maksimum Desteklenen Cihaz Sayısı1
Uyumlu CihazlarFan
Image showing the compact dimensions of the Anderic RRTR214D remote control.

Image: The Anderic RRTR214D remote control is displayed with its compact dimensions (5.5 inches length, 2 inches width, 0.9 inches thickness), highlighting its comfortable and easy-to-use design.

9. Garanti ve Destek

For warranty information or technical support regarding your Anderic RRTR214D remote control, please refer to the product packaging or visit the official Anderic website. You may also contact Anderic customer service directly for assistance with troubleshooting, replacement parts, or any other inquiries.

Manufacturer: Dan's Electronics Etc., Inc.

İlgili Belgeler - RRTR214D

Önview Anderic RRTX012 ve FD40-H02R Tavan Vantilatörü Uzaktan Kumanda Talimatları
Anderic RRTX012 ve FD40-H02R tavan vantilatörü uzaktan kumandaları için kapsamlı kılavuz; kurulum, ayarlama, pil değişimi, uzaktan eşleştirme ve fan hızları, aydınlatma, zamanlayıcılar ve Home Shield ve Walk Away Light Delay gibi özel özelliklerin ayrıntılı çalışmasını kapsar.
Önview Anderic RRTX012 Uzaktan Kumanda Kullanım Talimatları
Anderic RRTX012 tavan vantilatörü uzaktan kumandası için kullanım talimatları, duvar braketi kurulumunu, uzaktan kurulumu, pil kurulumunu, eşleştirmeyi ve fan hızlarının, doğal esintinin, ışık fonksiyonlarının, uzaklaşma ışığı gecikmesinin, ev kalkanının, uyku zamanlayıcısının ve güç kapatma belleğinin ayrıntılı çalışmasını kapsar.
Önview ANDERIC® RRTX001R Uzaktan Kumanda Kullanım Kılavuzu
ANDERIC® RRTX001R Uzaktan Kumanda için pil kurulumunu, eşleştirme talimatlarını, ürün fonksiyonlarını ve duvar montaj braketinin kurulumunu ayrıntılı olarak açıklayan kullanıcı kılavuzu.
Önview Anderic Üniversal Termostatik Tavan Vantilatörü Uzaktan Kumanda Kiti Kurulum ve Kullanım Kılavuzu
Anderic HD3 Üniversal Termostatik Tavan Vantilatörü Uzaktan Kumanda Kitinin kurulumu ve çalıştırılmasına ilişkin kapsamlı kılavuz; güvenlik bilgileri, sorun giderme ve garanti detayları da dahil.
Önview Anderic FAN9T ve FAN28R/UC7067FCRX Kurulum Talimatları
Anderic FAN9T ve FAN28R/UC7067FCRX tavan vantilatörü uzaktan kumanda sistemi için alıcı kablolaması, uzaktan eşleştirme ve pil montajı dahil ayrıntılı kurulum kılavuzu.
Önview Anderic UC7058RY Tavan Vantilatörü Alıcısı Kurulum Kılavuzu
Anderic UC7058RY tavan vantilatörü alıcısı için ayrıntılı kurulum ve eşleştirme talimatları. Anderic RR7078TR ve RR7083TR uzaktan kumandalarıyla uyumluluk hakkında notlar içerir. Kurulum ve uzaktan senkronizasyon için adım adım kılavuz sağlar.