AMPYapay Zeka Destekli WiFi Dokunmatik Akıllı Duvar Anahtarı Kullanım Kılavuzu

1. Giriş

Seçtiğiniz için teşekkür ederiz AMPAI WiFi Wall Touch Smart Switch. This smart switch is designed to upgrade your home lighting control with advanced features and convenience. It offers multiple control methods including touch panel, RF433 remote, and voice control via Alexa and Google Home. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance and safety.

Şekil 1: AMPAI WiFi Wall Touch Smart Switch (4 Gang) and included RF433 Remote.

2. Önemli Güvenlik Bilgileri

• Elektriksel Güvenlik: Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical systems. Always turn off power at the circuit breaker before installation or maintenance.
• Uyumluluk: This switch is designed for standard on/off control only. It is NOT compatible with dimmable bulbs or fixtures. Attempting to use it with dimmable bulbs may cause damage to the bulbs or the switch.
• Wi-Fi Ağı: The smart switch operates on a 2.4GHz Wi-Fi network only. It is not compatible with 5GHz Wi-Fi networks. Ensure your router supports 2.4GHz.
• Kablolama: This switch supports both neutral wire and no neutral wire (single fire) installations. Refer to the wiring diagrams carefully.
• Not a Traditional 3-Way Switch: While it offers 3-way control via multi-control methods (app, remote, voice), it does not function as a traditional mechanical 3-way switch requiring traveler wires between two switches.

Figure 2: Key attention points regarding 2.4GHz WiFi, wiring, and non-compatibility with traditional 3-way or dimmable setups.

3. Paket İçeriği

Lütfen paketi açtığınızda tüm ürünlerin eksiksiz ve hasarsız olduğundan emin olmak için paketi kontrol edin:

• AMPAI WiFi Wall Touch Smart Switch (4 Gang)
• Montaj Donanımı (Vidalar)
• RF433 Remote Control (if included in your specific package)
• Kullanım Kılavuzu (bu belge)

4. Kurulum ve Kurulum

4.1 Kablolama Talimatları

WARNING: Ensure power is OFF at the circuit breaker before beginning any wiring.

This smart switch supports two wiring methods: with a neutral wire or without a neutral wire (single fire). Identify your home's wiring configuration before proceeding.

Figure 3: Wiring diagrams for Neutral and Fire Line (left) and Single Fire (right) installations. A capacitor is required for single fire wiring.

1. Gücü kapatın: Locate the circuit breaker controlling the light switch and turn it OFF. Verify power is off using a voltage test cihazı.
2. Eski şalteri çıkarın: Mevcut duvar plakasını dikkatlice çıkarın ve eski şalteri duvar kutusundan sökün. Kabloları ayırın.
3. Kabloları tanımlayın: Identify the Live (Line), Load, and Neutral wires (if present). For single fire wiring, you will only have Live and Load.
4. Akıllı Anahtarı Kablolayın:
   • Neutral and Fire Line Wiring: Connect the Live wire to the 'L' terminal, the Neutral wire to the 'N' terminal, and the Load wires to the 'L1', 'L2', 'L3', 'L4' terminals corresponding to your light circuits.
   • Single Fire Wiring: Connect the Live wire to the 'L' terminal and the Load wires to the 'L1', 'L2', 'L3', 'L4' terminals. A capacitor must be connected across the Live and Load wires of the light fixture for stable operation.
5. Anahtarı takın: Secure the smart switch into the wall box using the provided screws. Attach the glass panel.
6. Gücü geri yükleyin: Devre kesiciden gücü tekrar AÇIN.

4.2 App Installation and Pairing (Tuya Smart Life)

1. İndir uygulaması: "Smart Life" veya "Tuya Smart" uygulamasını App Store'dan (iOS) veya Google Play Store'dan (Android) indirin.
2. Kayıt Ol/Giriş Yap: Uygulamayı açın ve yeni bir hesap kaydedin veya zaten bir hesabınız varsa giriş yapın.
3. Cihaz Ekle:
   • Telefonunuzun 2.4 GHz Wi-Fi ağına bağlı olduğundan emin olun.
   • Uygulamada, bir cihaz eklemek için sağ üst köşedeki "+" simgesine dokunun.
   • Select "Electrical Switch" or "Wall Switch" from the device list.
   • Ekranda gösterilen talimatları izleyerek anahtarı eşleştirme moduna geçirin (genellikle anahtar üzerindeki bir düğmeye basılı tutarak gösterge ışığı hızlı bir şekilde yanıp sönene kadar bekleyin).
   • Confirm the indicator light is blinking rapidly in the app and enter your Wi-Fi password.
   • The app will connect to the switch. Once connected, you can rename the switch and assign it to a room.

4.3 RF433 Remote Pairing

The included RF433 remote can be paired directly with the switch for local control without Wi-Fi.

1. Eşleştirme Moduna Girin: On the smart switch, press and hold the touch button you wish to pair for approximately 5-7 seconds until you hear a "beep" sound or see a small indicator light flash.
2. Uzaktan Kumanda Düğmesine Basın: Within 3 seconds, press the corresponding button (A, B, or C) on the RF433 remote.
3. Onay: The switch will "beep" again or the light will stop flashing, indicating successful pairing.

5. Operating the Smart Switch

5.1 Dokunmatik Kontrol

Simply touch the corresponding icon on the glass panel to turn the connected light ON or OFF.

Figure 4: The smart switch supports multiple control methods for convenience.

5.2 Smart Life / Tuya App Control

Open the Smart Life or Tuya Smart app on your smartphone. From the device list, tap on your smart switch to access its control interface. You can turn lights ON/OFF, set schedules, and create scenes from anywhere with an internet connection.

5.3 Sesle Kontrol (Alexa ve Google Home)

The AMPAI Smart Switch is compatible with Amazon Alexa and Google Home for convenient voice control.

1. Hesabı Bağla: In the Alexa or Google Home app, enable the "Smart Life" or "Tuya Smart" skill/action and link your Smart Life/Tuya account.
2. Cihazları Keşfedin: Ask Alexa or Google Home to "Discover devices" or manually add them through the app.
3. Sesli Komutlar: Once discovered, you can use commands like:
   • "Alexa, [Işık Adı]'nı aç"
   • "Hey Google, turn off [Light Name]"
   • "Alexa, set [Light Name] to 50%" (Note: This switch does not support dimming, so dimming commands will not work.)

Figure 5: Enjoy hands-free control with Amazon Alexa and Google Assistant.

5.4 RF433 Uzaktan Kumanda

Use the paired RF433 remote to control the switch from a distance. Each button (A, B, C) on the remote can be paired to control a specific gang or group of gangs on the switch.

Figure 6: The RF433 remote provides an additional convenient control method.

5.5 Timer and Scene Functions

Utilize the Smart Life/Tuya app to set schedules and create custom scenes for your lighting. For example, you can set lights to turn on at sunset or off at a specific time, or create a "Movie Night" scene that turns off certain lights.

Figure 7: Set timers and scenes for automated lighting control.

6. Bakım

The AMPAI Smart Switch requires minimal maintenance. To keep it clean and functioning properly:

• Temizlik: Gently wipe the glass panel with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they may damage the surface.
• Güç Döngüsü: Eğer şalter yanıt vermez hale gelirse, devre kesiciden elektriği 10 saniye süreyle kapatıp sonra tekrar açmayı deneyin.
• Donanım Yazılımı Güncellemeleri: Periodically check the Smart Life/Tuya app for any available firmware updates for your switch to ensure optimal performance and security.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

For warranty information and technical support, please contact AMPAI customer service. You can often find support contact details on the product packaging, the manufacturer's official website üzerinden veya satın alma platformunuz aracılığıyla (örneğin Amazon).

Üretici: AMPAI

Daha fazla yardım için lütfen şu adresi ziyaret edin: AMPAmazon'da Yapay Zeka Mağazası.