Philips 44W 4200 lm Motion Sensor LED Security Light Outdoor Instruction Manual

1. Ürün Bittiview

The Philips 44W 4200 lm Motion Sensor LED Security Light is designed for outdoor use, providing bright and efficient illumination. This 2-pack floodlight features a Passive Infrared (PIR) motion sensor, 5000K daylight color temperature, and is built to withstand various weather conditions. Its adjustable heads and multiple operating modes offer versatile lighting solutions for your property.

Image: Philips 44W 4200 lm Motion Sensor LED Security Light (2-pack) in black.

2. Güvenlik Bilgileri

• Kurulum veya bakım işlemlerinden önce daima devre kesiciden elektriği kesin.
• Kurulum sürecinden emin değilseniz, kalifiye bir elektrikçiye danışın.
• Tüm kablo bağlantılarının güvenli olduğundan ve yerel elektrik yönetmeliklerine uyduğundan emin olun.
• Do not attempt to modify the product. Any modifications may void the warranty and create safety hazards.
• Çocukları kurulum alanından uzak tutun.

3. Kutuda Neler Var?

Each Philips 44W 4200 lm Motion Sensor LED Security Light package includes the following components:

• LED Security Light Fixture (2 units for this pack)
• LED Mercek
• Mounting Hardware (screws, wire nuts, mounting plate, rubber plug, gasket)
• Kullanım Kılavuzu

Image: Included accessories for installation.

4. Özellikler

• Yüksek Parlaklık ve Geniş Işın Açısı: Emits 4200 lumens with a 5000K cool daylight color temperature. Two adjustable heads provide customizable coverage.
• High-Sensitivity PIR Sensor: Detects motion within a 0-69ft range and 180° induction angle. Lighting time is adjustable from 1-10 minutes.
• 4 Aydınlatma Modu: Includes Test Mode, Security Mode, Dusk to Dawn Mode, and Manual Override Mode (always-on at 80% brightness for up to 6 hours).
• Dayanıklı ve Hava Koşullarına Dayanıklı: Constructed with aluminum lamp material, tested for corrosion and rust resistance, and rated IP65 for various weather conditions.
• Enerji Tasarruflu LED: Integrated LED design eliminates bulb replacement and reduces electricity costs by up to 80% compared to 220W incandescent fixtures.
• Ayarlanabilir Başlık Tasarımı: Customize each light head's angle to suit specific lighting needs.

Image: Key features of the Philips security light.

Image: Adjustable head design for flexible lighting coverage.

Image: Aluminum construction for durability and heat dissipation.

5. Kurulum

The Philips security light is designed for easy installation. It requires hardwiring; a junction box is not included. Follow these general steps for installation:

1. Kablolamayı Hazırlayın: Ensure power is off at the circuit breaker. Connect the ground wire (green) from the light fixture to the ground wire in the junction box.
2. Kabloları Bağlayın: Connect the white wire (neutral) from the light fixture to the white wire from the junction box using a wire nut. Connect the black wire (live) from the light fixture to the black wire from the junction box using a wire nut.
3. Montaj plakası: Montaj plakasını bağlantı kutusuna sabitleyin.
4. Fikstürü Takın: Align the light fixture with the mounting plate and secure it with the provided screws. Ensure a tight seal between the lamp and the wall to enhance water resistance.
5. Fok: Apply sealant around the fixture base to prevent water leakage.
6. Başlıkları Ayarlayın: Adjust the light heads and motion sensor to your desired angles.

Recommended installation height: 8.2 ft.

Image: Easy installation steps for the security light.

Image: Two common mounting methods: eave and wall mounting.

Kurulum Videosu

6. Çalışma Modları

The Philips security light offers four distinct operating modes to suit various needs:

Resim: Üzeriview of the four available lighting modes.

1. Test modu: Can be activated in both daytime and nighttime. When motion is detected, the light turns on for 5 seconds. If no motion, it stays off. This mode is useful for verifying sensor functionality and coverage area during installation.


Image: Test Mode operation.

2. Güvenlik Modu: Operates only at nighttime. When motion is detected, the light automatically turns on for a set duration (1, 3, or 10 minutes). If no motion, it stays off.


Image: Security Mode operation.

3. Alacakaranlıktan Şafağa Modu: Operates only at nighttime. The light automatically turns on at dusk and turns off at dawn. When motion is detected, the light brightens to 100% and then dims to 20% when no one is around.

Image: Dusk to Dawn Mode operation.
4. Manuel Geçersiz Kılma Modu: Can be activated in both daytime and nighttime. This mode keeps the light on at 80% brightness for a maximum of 6 hours. To activate, switch the light OFF and ON twice within 3 seconds. To deactivate, switch the light OFF and ON for more than 3 seconds, returning it to sensor mode. The brightness automatically dims from 100% to 80% after 12 minutes in this mode.


Image: Manual Override Mode activation and deactivation.

7. Ayarların Yapılması

The motion sensor allows for adjustment of both sensing distance and activated lighting time:

• Algılama Mesafesi: Adjust the 'DISTANCE' dial on the sensor to set the detection range:
  • L (Düşük): 0-20 ft
  • M (Orta): 0-39 ft
  • H (Yükseklik): 0-69 ft
• Activated Lighting Time: Adjust the 'TIME' dial on the sensor to set how long the light stays on after motion is detected:
  • 1 MIN: 1 minute
  • 3 MIN: 3 minutes
  • 10 MIN: 10 minutes

Image: Dials for adjusting sensing distance and lighting time.

Image: Switch tips for adjusting sensor settings.

8. Bakım

To ensure optimal performance and longevity of your Philips security light, follow these maintenance guidelines:

• Temizlik: Periodically clean the light fixture and motion sensor lens with a soft, damp Bez. Cilaya veya elektronik bileşenlere zarar verebilecek aşındırıcı temizleyiciler veya çözücüler kullanmaktan kaçının.
• Denetleme: Regularly inspect the fixture for any signs of damage, loose wiring, or wear. Ensure the sealant around the base remains intact to maintain its waterproof rating.
• Ampul Değişimi Yok: This unit features integrated LED lighting, meaning there are no bulbs to replace.

9. Sorun Giderme

If you encounter issues with your Philips security light, refer to the following common troubleshooting steps:

• Işık Açılmıyor:
  • Sigortadaki güç kaynağını kontrol edin.
  • Ensure the motion sensor is not obstructed.
  • Verify the operating mode settings (e.g., if in Security Mode, ensure it's dark enough).
  • Adjust the 'DISTANCE' and 'TIME' settings on the sensor.
• Light Stays On Continuously:
  • Check if the light is in Manual Override Mode. Refer to Section 6 for deactivation instructions.
  • Ensure the 'TIME' setting is not set too high.
  • Verify that there is no continuous motion within the sensor's detection range.
• Motion Sensor Not Detecting:
  • Ensure the sensor lens is clean and free from obstructions.
  • Adjust the 'DISTANCE' setting to a higher sensitivity.
  • Verify the sensor's angle and position to cover the desired area.
  • Test the sensor in 'Test Mode' to confirm functionality.

Ürün Videosu

10. Özellikler

11. Garanti ve Destek

Philips products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official Philips website veya doğrudan müşteri hizmetleriyle iletişime geçin. Garanti talepleri için satın alma kanıtı olarak satın alma makbuzunuzu saklayın.

Daha fazla bilgi için şu adresi ziyaret edin: Amazon'da Philips Mağazası.