VGR Professional Hair Clipper and Trimmer Set User Manual

giriiş

This manual provides detailed instructions for the safe and effective use of your VGR Professional Hair Clipper (V-003) and T-Blade Trimmer (V-906) set. Please read all instructions carefully before first use and retain this manual for future reference.

Önemli Güvenlik Bilgileri

For your safety, always follow these precautions:

• Bebeklerde kullanmaktan kaçının.
• Keep the trimmer away from water sources. Do not use while bathing or showering.
• Bu kılavuzda belirtilen önerilen temizlik ve bakım prosedürlerini uygulayın.
• Use with caution to prevent skin irritation or eye injury from cutting blades.
• Cihazı kendiniz onarmaya çalışmayın. Yardım için müşteri desteğiyle iletişime geçin.
• Optimum performansı korumak için kullanmadan önce cihazın tamamen şarj edildiğinden emin olun.

Paket İçeriği

Your VGR Professional Hair Clipper and Trimmer Set includes the following items:

• 1 x VGR V-003 Professional Hair Clipper
• 1 x VGR V-906 T-Blade Trimmer
• 6 Adet Tarak Ucu (1.5 mm, 3 mm, 4.5 mm, 6 mm, 9 mm, 12 mm)
• 3 Adet Saç Kesme Tarak Ucu (1 mm, 2 mm, 3 mm)
• 2 x USB Şarj Kabloları
• 2 x Bıçak Koruyucu Kapak
• 1 x Temizleme Fırçası
• 1 x Yağlama Yağı
• 1 x Kullanım Kılavuzu

Figure 1: Complete set of VGR Hair Clipper and Trimmer with accessories.

Ürün Bittiview

VGR V-003 Profesyonel Saç Kesme Makinesi

Figure 2: VGR V-003 Hair Clipper with key features.

• Ceramic and Powder Metallurgy Blades: Designed for long-lasting sharpness and reduced overheating.
• Ayarlanabilir Konik Kol: Allows for precise cutting length adjustments from 0.5mm to 2.5mm.
• Güçlü Motor: Operates at up to 9000 RPM with two speed adjustments for various hair textures.
• LED ekran: Shows real-time power level.
• Uzun Pil Ömrü: 2500mAh battery provides up to 250 minutes of run time on a 3-hour charge.
• USB Şarj: Supports both corded and cordless operation.

VGR V-906 T-Blade Trimmer

Figure 3: VGR V-906 T-Blade Trimmer with key features.

• DLC-Coated T-Blades: Zero-gap design for ultra-fine trimming and precise lines.
• Güçlü Motor: Reaches 9000 RPM for smooth and delicate grooming results.
• LED ekran: Shows real-time power level.
• Uzun Pil Ömrü: 2000mAh battery provides up to 240 minutes of run time on a 2.5-hour charge.
• USB Şarj: Supports both corded and cordless operation.

Kurmak

1. İlk Şarj

Before first use, fully charge both the hair clipper and trimmer. Connect the USB charging cable to the device and a suitable USB power adapter (not included). The LED display will indicate charging status and battery level.

• V-003 Clipper: Approximately 3 hours for a full charge, providing up to 250 minutes of use.
• V-906 Trimmer: Approximately 2.5 hours for a full charge, providing up to 240 minutes of use.

Figure 4: V-003 Clipper charging.

Figure 5: V-906 Trimmer charging.

2. Kılavuz Tarakların Takılması

Select the desired guide comb for your preferred hair length. Align the comb with the blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.

• V-003 Clipper: Use the 6 larger guide combs (1.5mm to 12mm).
• V-906 Trimmer: Use the 3 smaller limiting combs (1mm to 3mm) for detail work.

Figure 6: Attaching guide combs to the clipper and trimmer.

3. Adjusting the Taper Lever (V-003 Clipper Only)

The taper lever on the side of the V-003 clipper allows for fine adjustment of cutting length without changing guide combs. Move the lever up for a shorter cut (0.5mm) and down for a longer cut (2.5mm). This is ideal for blending and fading.

Figure 7: Taper lever adjustment on the V-003 Clipper.

Kullanım Talimatları

1. Güç Açma/Kapatma

Press the power button to turn the device on. Press it again to turn off. The LED display will illuminate when the device is on.

2. Speed Adjustment (V-003 Clipper)

The V-003 clipper features two speed settings. Press the power button briefly while the device is on to toggle between the two speeds, up to 9000 RPM. Use a lower speed for finer hair or sensitive areas, and a higher speed for thicker hair.

3. Hair Clipping (V-003 Clipper)

1. Saçlarınızın temiz ve kuru olduğundan emin olun.
2. İstediğiniz kılavuz tarağı takın.
3. Adjust the taper lever if needed for blending.
4. Hold the clipper with the blades pointing upwards and move against the direction of hair growth.
5. Düzgün bir kesim için pürüzsüz, üst üste binen vuruşlar kullanın.

Figure 8: Using the VGR V-003 Clipper for hair cutting.

4. Detail Trimming (V-906 Trimmer)

1. For precise lines and edges, use the trimmer without a comb or with a limiting comb (1-3mm).
2. Tıraş makinesini cilde hafif bir açıyla tutun.
3. Use light pressure and short, controlled strokes to define hairlines, beard edges, and sideburns.

Figure 9: Using the VGR V-906 Trimmer for detailing.

Bakım

1. Bıçakların Temizlenmesi

After each use, turn off the device and remove any attached guide comb. Use the provided cleaning brush to remove loose hairs from the blades. For a more thorough cleaning, the blades can be carefully detached (refer to specific blade removal instructions if provided in a separate diagram, otherwise, clean while attached).

2. Bıçakların Yağlanması

Regularly oil the blades to maintain optimal cutting performance and extend their lifespan. Apply 1-2 drops of the provided lubricant oil onto the blades while the device is running for a few seconds. Wipe off any excess oil with a soft cloth.

Figure 10: Cleaning brush and lubricant oil.

3. Depolama

Store the clipper and trimmer in a dry, cool place, away from direct sunlight and moisture. Always attach the blade protective cap when not in use to prevent damage to the blades.

Sorun giderme

Özellikler

• Marka: VGR
• Model Numaraları: V-003 (Clipper), V-906 (Trimmer)
• Güç Kaynağı: Pil ile çalışır (USB ile şarj edilebilir)
• V-003 Clipper Battery: 2500mAh Li-ion, up to 250 minutes run time, 3 hours charge time
• V-906 Trimmer Battery: 2000mAh Li-ion, up to 240 minutes run time, 2.5 hours charge time
• Blade Material (V-003): Seramik ve Toz Metalurjisi
• Blade Material (V-906): DLC Kaplamalı
• Motor Hızı: Up to 9000 RPM (2 adjustable speeds for V-003)
• Clipper Guide Combs: 1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm
• Trimmer Limiting Combs: 1mm, 2mm, 3mm
• Clipper Taper Lever Adjustment: 0.5 mm - 2.5 mm
• Ürün Ağırlığı: 560 Gram
• Paket Boyutları: 11.38 x 9.76 x 3.54 inç

Garanti ve Destek

VGR products come with a 1-year warranty from the date of purchase. For any product inquiries, technical support, or warranty claims, please contact our customer support team. We offer 24-hour support to assist you.

Figure 11: VGR Customer Support and Warranty Information.

For further assistance, please visit the official VGR websiteyi ziyaret edin veya doğrudan satıcıyla iletişime geçin.