Revopoint Mini 2 3D Tarayıcı Kullanım Kılavuzu

1. Giriş

The Revopoint Mini 2 is a high-precision 3D scanner designed for capturing intricate details of small to medium-sized objects. Utilizing industrial-grade blue light technology, it offers exceptional accuracy and speed, making it suitable for applications such as 3D printing, dental modeling, and industrial design.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Revopoint Mini 2 3D Scanner to ensure optimal performance and longevity.

Figure 1: Revopoint Mini 2 3D Scanner, showcasing its design and screen interface.

2. Güvenlik Bilgileri

Please read all safety instructions carefully before using the Revopoint Mini 2 3D Scanner. Failure to follow these instructions may result in injury or damage to the device.

• Blue Light Safety: The Mini 2 uses Class 1 industrial blue light, which is considered 100% skin-safe. However, direct exposure to the eyes may cause minor discomfort. Avoid staring directly into the blue light emitters during operation.
• Güç Kaynağı: Yalnızca birlikte verilen güç adaptörünü kullanın. Güç kaynağının ses seviyesiyle uyumlu olduğundan emin olun.tage requirements specified for the device.
• Çevre: Operate the scanner in a clean, dry environment. Avoid exposure to extreme temperatures, humidity, dust, or direct sunlight.
• İşleme: Handle the scanner with care. Do not drop or subject it to strong impacts.
• Temizlik: Temizlemeden önce elektriği kesin. Yumuşak, kuru bir bez kullanın. Sıvı temizleyiciler veya aerosoller kullanmayın.
• Değişiklikler: Do not attempt to disassemble, repair, or modify the scanner. Unauthorized modifications will void the warranty and may cause harm.

3. Kutuda Neler Var?

Paketi açtıktan sonra, aşağıdaki tüm bileşenlerin mevcut olup olmadığını kontrol edin:

• Revopoint Mini 2 3D Scanner

Note: Additional accessories such as tripods, turntables, calibration boards, and USB cables may be included depending on the specific package purchased, as depicted in Figure 2.

Figure 2: Typical contents of the Revopoint Mini 2 package, including the scanner and various accessories.

4. Kurulum Kılavuzu

Follow these steps to set up your Revopoint Mini 2 3D Scanner:

1. Tarayıcıyı Paketinden Çıkarın: Tarayıcıyı ve tüm aksesuarları ambalajından dikkatlice çıkarın.
2. Güç Bağlantısı: Connect the provided power adapter to the scanner and a suitable power outlet.
3. Yazılım Kurulumu: Download and install the latest version of the RevoScan software from the official Revopoint website onto your computer or mobile device. The software is essential for operating the scanner and processing scan data.
4. Cihaza Bağlan: Connect the Mini 2 scanner to your computer or mobile device using the provided USB Type-C cable. Ensure a stable connection.
5. İlk Kalibrasyon: For optimal accuracy, perform an initial calibration using the provided calibration board as instructed by the RevoScan software. This step ensures precise measurements.

Figure 3: The Revopoint Mini 2 scanner, ready for connection and software setup.

5. Kullanım Talimatları

The Revopoint Mini 2 is designed for efficient and precise 3D scanning. Here are key aspects of its operation:

5.1 Scanning Principles

• Kesinlik: The scanner achieves a single-frame precision of up to 0.02 mm, ideal for capturing fine details.
• Hız: It offers fast capture speeds of up to 16 frames per second (fps), allowing for quick data acquisition.
• Mavi Işık Teknolojisi: Industrial-grade blue light technology minimizes interference from ambient light, enhancing accuracy and model quality.
• Tek Yakalama Aralığı: A larger single capture range of up to 168 x 132 mm improves tracking and scanning of larger objects.
• Color and Texture: An RGB camera with a bigger aperture and Flash LEDs enhances the capture of intricate texture and color details. The 6 Flash LEDs also improve marker recognition for smoother scanning of featureless objects.
• IMU Technology: The integrated IMU (Inertial Measurement Unit) helps remove faulty frames caused by fast movement or shaky hands, improving tracking stability.

5.2 Tarama Süreci

1. Nesneyi hazırlayın: For best results, especially with reflective, transparent, or very dark objects, consider using scanning spray or applying scanning markers.
2. Launch RevoScan: Open the RevoScan software on your connected device.
3. Select Scan Mode: Choose the appropriate scanning mode (e.g., handheld, turntable) and adjust settings like exposure using the software interface or the three tactile buttons on the scanner.
4. Taramayı Başlat: Begin scanning the object, maintaining a steady distance and movement as guided by the software. The IMU will assist in stable tracking.
5. Review ve Süreç: Tarama işleminden sonra, yenidenview the captured data within RevoScan. The software allows for merging multiple scans, cleaning up data, and exporting the 3D model in various formats.

Figure 4: Scanning a small, intricate object with the Revopoint Mini 2.

Figure 5: The Mini 2's capability to scan larger objects, demonstrating its versatility.

Figure 6: The scanner being used to capture a human form, highlighting its broad application.

Figure 7: Close-up of the Revopoint Mini 2's screen, showing the user interface during a scan.

6. Bakım

Proper maintenance ensures the longevity and performance of your Revopoint Mini 2 3D Scanner:

• Lenslerin Temizlenmesi: Gently wipe the scanner's lenses and sensors with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals that could scratch the surfaces.
• Yazılım Güncellemeleri: Regularly check for and install software updates for RevoScan. Updates often include performance improvements, bug fixes, and new features.
• Depolamak: When not in use, store the scanner in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Kablo Bakımı: Avoid bending or crimping the USB cable excessively, as this can damage the internal wires.

7. Sorun Giderme

This section addresses common issues you might encounter with your Revopoint Mini 2 3D Scanner.

8. Özellikler

9. Garanti ve Destek

Revopoint products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Revopoint webalan.

For technical support, troubleshooting assistance, or inquiries regarding your Revopoint Mini 2 3D Scanner, please contact Revopoint Customer Service. You can find contact information on the official Revopoint websiteleri üzerinden veya Amazon mağaza sayfaları aracılığıyla:

Visit the Official Revopoint Store on Amazon