Sodola 24-Port 2.5Gb Easy Smart Managed PoE Switch User Manual

1. Giriş

This manual provides detailed instructions for the installation, configuration, and operation of your Sodola 24-Port 2.5Gb Easy Smart Managed PoE Switch. This device is designed to provide high-speed network connectivity and Power over Ethernet (PoE) capabilities for various network devices.

The switch features 24 2.5Gb PoE ports and 2 10G SFP+ uplink ports, offering robust performance for demanding network environments. It supports web-based management for easy configuration and monitoring.

2. Paket İçeriği

Paketinizin aşağıdaki öğeleri içerdiğini doğrulayın:

• 1 x Sodola 24-Port 2.5G Managed PoE Switch
• 1 x Güç Kablosu
• 1 x Kullanım Kılavuzu (bu belge)

3. Ürün Bittiview

The Sodola 24-Port 2.5Gb PoE Switch is a multi-gigabit managed switch designed for high-performance networking. It offers a combination of 2.5 Gigabit Ethernet ports with Power over Ethernet capabilities and 10 Gigabit SFP+ ports for high-speed uplinks.

3.1 Temel Özellikler

• 2.5G & 10G PoE Switch: 24x 2.5Gb PoE ports + 2x 10G SFP+ ports for high-speed network connectivity.
• IEEE 802.3bt/at/af Compliant: Ports 1-4 support up to 90W each, and ports 5-24 support up to 30W each, with an overall PoE power budget of 500W. Note: Does not support passive 24V PoE devices.
• Kolay Web Yönetmek: Sezgisel web interface for device status monitoring and configuration of features like Link Aggregation, VLAN, QoS, Multicast, MAC, and RSTP.
• 160 Gbps Bant Genişliği: Robust switching capacity for lag-free data transfers.
• Evrensel Uyumluluk: Compatible with various Ethernet devices such as 2.5G WiFi 6 APs, 2.5G NAS, 2.5G PCIe Adapters, and 2.5G Servers.
• 1U Rack Mounted Design: Supports 1U rack mounting and features a bilateral cooling design without a built-in fan for silent operation.

3.2 Ön Panel Düzeni

Figure 1: Front Panel Layout with Port and Indicator Labels

• 1. 1G/10G or 2.5G/10G SFP+ Ports: Two ports for high-speed fiber optic uplinks.
• 2. 24x 10/100/1000M/2.5G PoE Ports: Twenty-four 2.5 Gigabit Ethernet ports with Power over Ethernet capabilities.
• 3. RESET Button: Fabrika ayarlarına dönmek için 6 saniye basılı tutun.
• 4. LINK/ACT & PoE Indicators: LEDs indicating link status, activity, and PoE power status for each port.
• 5. SYS Indicator: Sistem durumu gösterge ışığı.
• 6. PWR Indicator: Güç kaynağı gösterge ışığı.

3.3 Arka Panel Düzeni

Figure 2: Rear Panel Layout with Power Input and Grounding Screw

• 7. AC INPUT 100-240V: Power input for the switch.
• 8. Ground Screws: For connecting a grounding wire to ensure electrical safety.
• 9. PoE MAX Indicator: Shows the PoE power usage status (OFF: <90%, FLASHING: 90%-95%, ON: 95%-100%).

4. Kurulum

Follow these steps to set up your Sodola PoE Switch:

4.1 Fiziksel Kurulum

• Masaüstü Yerleşimi: Anahtarı düz ve sağlam bir yüzeye yerleştirin. Cihazın etrafında yeterli havalandırma olduğundan emin olun.
• Raf Montajı: The switch supports 1U rack mounting. Use appropriate rack-mount brackets (not included unless specified) to secure the device in a standard 19-inch server rack.

Figure 3: Rack Mounting Example

4.2 Güç Bağlantısı

1. Connect the provided power cord to the AC INPUT port on the rear panel of the switch.
2. Plug the other end of the power cord into a standard AC power outlet (100-240V).
3. The PWR indicator on the front panel should illuminate, indicating the switch is receiving power.

4.3 Ağ Bağlantıları

Connect your network devices to the switch using Ethernet cables. For optimal 2.5GbE speeds, use Cat6 or higher pure copper cables. Ensure all connected devices (routers, NICs, etc.) also support 2.5GbE; otherwise, network speed will default to the slowest connected device.

• PoE Cihazları: Connect PoE-compatible devices (e.g., IP cameras, wireless access points) to ports 1-24. These ports will automatically detect and provide power to compliant devices.
• PoE Destekli Olmayan Cihazlar: Non-PoE devices can also be connected to ports 1-24 for data connectivity.
• Yukarı Bağlantı Bağlantıları: Use the 10G SFP+ ports for high-speed connections to your core network, servers, or other 10G-capable devices.

5. Kullanım Talimatları

The Sodola PoE Switch is largely plug-and-play for basic network connectivity. Once powered on and devices are connected, it will begin forwarding data.

5.1 LED Göstergeleri

Monitor the LED indicators on the front panel for device status:

• güç: Solid green when the switch is powered on.
• SYS: Indicates system status. Refer to the full user manual for specific blink patterns.
• LINK/ACT (per port): Solid green when a link is established, flashing green when data is being transmitted/received.
• PoE (per port): Solid green when PoE power is being supplied to a connected device.
• PoE MAX: Indicates total PoE power usage. OFF: <90%, FLASHING: 90%-95%, ON: 95%-100%.

5.2 Fabrika Ayarlarına Sıfırlama

To restore the switch to its factory default settings, press and hold the RESET button on the front panel for approximately 6 seconds. The switch will reboot with default configurations.

6. Web Yönetmek

The switch features an easy-to-use web-based management interface for advanced configuration and monitoring.

6.1 Erişim Web Arayüz

1. Ensure your computer is connected to the switch via an Ethernet cable.
2. Configure your computer's IP address to be in the same subnet as the switch's default IP address (e.g., if the switch is 192.168.2.1, set your computer to 192.168.2.x, where x is not 1).
3. Bir tane aç web Tarayıcıya girin ve anahtarın varsayılan IP adresini girin: 192.168.2.1
4. Enter the default login credentials: Kullanıcı adı: admin, Şifre: admin.
5. Başarılı giriş yaptıktan sonra erişim sağlayacaksınız. web yönetim arayüzü.

Şekil 4: Web Management Interface Login

6.2 Configuration Features

The web interface allows you to configure various network settings, including:

• Link Aggregation (LACP): Bant genişliğini ve yedekliliği artırmak için birden fazla fiziksel bağlantıyı tek bir mantıksal bağlantıda birleştirin.
• VLAN: Ağınızı bölümlere ayırmak ve daha iyi güvenlik ve performans elde etmek için Sanal Yerel Alan Ağları oluşturun.
• Hizmet Kalitesi (QoS): Kritik uygulamaların yeterli bant genişliğine sahip olmasını sağlamak için ağ trafiğini önceliklendirin.
• Multicast (IGMP Snooping): Optimize multicast traffic delivery to reduce network congestion.
• MAC Adresi Yönetimi: MAC adreslerine göre erişim kontrolü.
• RSTP (Hızlı Yayılma Ağacı Protokolü): Ağ döngülerini önleyin ve ağ istikrarını sağlayın.
• Bağlantı Noktası Yansıtma: Bir porttan diğerine paketlerin bir kopyasını göndererek ağ trafiğini izleyin.
• Jumbo Çerçeve Desteği: Increase data transfer efficiency for large packets.

Important: After making any configuration changes in the web interface, navigate to the 'Tools' or 'Save' section and save your settings to ensure they are retained after a power cycle.

7. Özellikler

8. Sorun Giderme

• Güç Yok: Ensure the power cord is securely connected to both the switch and a working power outlet. Check the PWR LED.
• Bağlantı/Etkinlik Yok: Verify that Ethernet cables are properly connected to both the switch and the network device. Check the LINK/ACT LED for the respective port. Ensure the connected device is powered on and functioning correctly.
• Yavaş Ağ Hızı: For 2.5GbE connections, ensure you are using Cat6 or higher pure copper cables and that all devices in the network path support 2.5GbE.
• PoE Cihazı Çalışmıyor: Confirm the connected device is PoE-compatible (IEEE 802.3af/at/bt). Check the PoE LED for the port. Ensure the total PoE power budget of 500W is not exceeded. Passive 24V PoE devices are not supported.
• Erişilemiyor Web Arayüz: Verify your computer's IP address is in the same subnet as the switch's default IP (192.168.2.1). Ensure the correct default username and password ('admin'/'admin') are used. Try resetting the switch to factory defaults if the IP address has been changed and forgotten.
• Configuration Changes Not Saved: Remember to explicitly save configurations through the web interface after making changes.

9. Bakım

• Temizlik: Anahtarın dış yüzeyini temizlemek için yumuşak, kuru bir bez kullanın. Sıvı veya aerosol temizleyiciler kullanmayın.
• Havalandırma: Ensure the ventilation openings on the sides of the switch are not obstructed to allow for proper heat dissipation.
• Donanım Yazılımı Güncellemeleri: Üreticinin periyodik olarak kontrol edin webEn iyi performansı ve güvenliği sağlamak için yazılım güncellemeleri için site.

10. Garanti ve Destek

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official Sodola webalan. Garanti talepleri için satın alma makbuzunuzu saklayın.