1. Giriş
The RAINPOINT 4 Outlets Hose Timer is an advanced irrigation controller designed to simplify your watering tasks. Featuring four individually programmable zones, it allows for customized watering schedules tailored to different areas of your garden or lawn. This timer supports automatic, timed, and manual watering modes, along with a convenient rain delay function to conserve water. Its robust, weatherproof construction ensures durability for outdoor use.
Şekil 1: Ön view of the RAINPOINT 4 Outlets Hose Timer, showing the LCD display, control dial, and four hose outlets.
2. Güvenlik Bilgileri
- Ensure the timer is securely attached to the faucet to prevent accidental detachment or damage.
- Use only 4 AA alkaline batteries (not included). Do not mix old and new batteries, or different types of batteries.
- Replace batteries promptly when the low power indicator flashes to avoid interruption of watering schedules and automatic valve closure.
- Protect the timer from freezing temperatures by removing it from the faucet and draining all water before winter.
- Do not disassemble or attempt to repair the unit yourself. Refer to the troubleshooting section or contact customer support.
- Ensure all connections are tight to prevent leaks. Periodically check washers and replace if worn.
3. Ürün Bittiview
The RAINPOINT 4 Outlets Hose Timer features a user-friendly design with a large LCD display and intuitive controls.
Temel Bileşenler:
- LCD Ekran: Large 3.3-inch screen for clear visibility of settings and current status.
- Kontrol Kadranı: Rotary dial for easy navigation between different programming modes (ON, OFF, Set Clock, Start Time, How Long, How Often).
- Düğmeler: OK/Manual, +/Delay, -, Zone buttons for precise adjustments and mode activation.
- 4 Çıkış: Individual outlets for connecting up to four hoses, allowing for independent zone control.
- Brass Inlet: Durable brass water inlet for secure connection to the faucet.
Figure 2: Illustration of the 4 programmable outlets, highlighting that only one valve can be open at a time for optimal performance.
Figure 3: Close-up of the large LCD display and control dial, demonstrating the ease of programming.
4. Kurulum
4.1 Pil Kurulumu
- Zamanlayıcının arka tarafında bulunan pil bölmesini bulun.
- Pil kapağını kaydırarak açın.
- 4 adet yeni AA alkalin pili, doğru kutuplara (+/-) dikkat ederek takın.
- Close the battery cover securely to maintain its waterproof seal.
Figure 4: The waterproof battery cover, ensuring protection against outdoor elements.
4.2 Connecting to Faucet and Hoses
- Screw the timer's brass inlet onto your 3/4-inch outdoor faucet. Hand-tighten firmly to prevent leaks.
- Connect your garden hoses to the four individual outlets at the bottom of the timer. Ensure each connection is tight.
- For added stability, especially with heavier hoses, utilize the reinforced column and consider securing the timer with a metal rod at the back (as shown in Figure 5).
Figure 5: The heavy-duty structure of the timer, illustrating secure mounting to a wooden post with a metal rod for stability.
5. Kullanım Talimatları
The RAINPOINT 4 Outlets Hose Timer offers flexible programming options for automatic, manual, and rain delay watering.
5.1 Saati Ayarlama
Zamanlayıcınızda geçerli saati ayarlamak için:
- Turn the control dial to "SET CLOCK".
- Saati ayarlamak için "+" veya "-" düğmelerini kullanın.
- Press "OK/Manual" to confirm the hour and move to minutes.
- Dakikaları ayarlamak için "+" veya "-" düğmelerini kullanın.
- Press "OK/Manual" to confirm.
- Turn the dial to "ON" to save the settings.
5.2 Setting Automatic Watering Schedule
You can program up to four independent watering zones. Each zone can have its own start time, duration, and frequency.
Figure 6: Visual representation of the flexible watering cycle modes, including start time, duration, and frequency settings.
1. Adım: Başlangıç Zamanını Ayarlayın
- Turn the control dial to "START TIME".
- Use the "+" or "-" buttons to adjust the desired start hour. Press and hold for quick adjustment.
- Press "OK/Manual" to confirm the hour and move to minutes.
- Dakikaları ayarlamak için "+" veya "-" düğmelerini kullanın.
- Press "OK/Manual" to confirm.
- Press the "ZONE" button to switch to another zone (1-4) and repeat the process for each desired zone.
Step 2: Set How Long (Watering Duration)
- Turn the control dial to "HOW LONG".
- Use the "+" or "-" buttons to set the watering duration from 1 minute to 3 hours 59 minutes. Press and hold for quick adjustment.
- Press "OK/Manual" to confirm.
- Press the "ZONE" button to switch to another zone (1-4) and repeat the process.
Step 3: Set How Often (Watering Frequency)
- Turn the control dial to "HOW OFTEN".
- Use the "+" or "-" buttons to set the frequency: every 1-12 hours, or every 1-7 days.
- Press "OK/Manual" to confirm.
- Press the "ZONE" button to switch to another zone (1-4) and repeat the process.
- Once all settings are complete, turn the control dial to "ON" to activate the automatic watering schedule.
Video 1: Detailed guide on setting the start time, watering duration, and frequency for the RAINPOINT Sprinkler Timer.
5.3 Manuel Sulama
The manual watering mode allows for immediate, unscheduled watering without affecting your programmed schedules.
- Ensure the control dial is set to "ON".
- Press and hold the "OK/Manual" button for 3 seconds until "MANUAL" appears on the screen.
- Use the "ZONE" button to select the desired watering zone (1-4) or "BOTH" for all active zones.
- Use the "+" or "-" buttons to set the manual watering duration (from 1 minute to 8 hours).
- Press "OK/Manual" to confirm and start manual watering.
- To stop manual watering, turn the dial to "OFF" or press "OK/Manual" again.
Figure 7: The manual watering feature in action, allowing for flexible, on-demand watering.
5.4 Yağmur Geciktirme Fonksiyonu
The rain delay feature allows you to pause your watering schedule for a set period, preventing overwatering during rainy weather.
- Ensure the control dial is set to "ON".
- Press and hold the "+/DELAY" button for 3 seconds. The screen will show "DELAY" and the default delay time.
- Use the "+" or "-" buttons to select the desired delay duration (24, 48, or 72 hours).
- Press "OK/Manual" to confirm the rain delay. The timer will resume its schedule automatically after the delay period.
- To cancel rain delay, press and hold "+/DELAY" again for 3 seconds.
Figure 8: The rain delay feature, offering options for 24, 48, or 72-hour pauses in watering.
6. Bakım
6.1 Filtrenin Temizlenmesi
A clogged filter can reduce water flow. Regular cleaning is recommended.
- Musluktan zamanlayıcıyı sökün.
- Locate the filter screen inside the brass inlet.
- Carefully remove the filter screen.
- Rinse the filter under running water to remove any debris. For stubborn clogs, use a small brush.
- Reinsert the clean filter screen and reattach the timer to the faucet.
6.2 Pil Değişimi
When the low power indicator flashes on the display, it's time to replace the batteries. This ensures continuous operation and prevents unexpected valve closures.
- Pil bölmesini açın.
- Eski pilleri çıkarın.
- Insert 4 new AA alkaline batteries, observing polarity.
- Pil kapağını sıkıca kapatın.
6.3 Kışa Hazırlık
To prevent damage from freezing temperatures, remove the timer from the faucet before the first frost.
- Disconnect the timer from the faucet and all hoses.
- Drain any remaining water from the timer.
- Store the timer indoors in a dry, frost-free location.
7. Sorun Giderme
Yaygın sorunlar ve çözümleri için aşağıdaki tabloya bakın.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Timer outlet not working. | Multiple zones set with overlapping working times. The four outlets run one by one. | Ensure no two outlets have repeated working hours. Adjust schedules so zones water sequentially. |
| Zamanlayıcı sızdırıyor. | Washer in the inlet is too loose or too tight, or is worn out. | Adjust the washer properly. If worn, replace it regularly. Ensure all connections are tight. |
| Water flow is smaller than before. | Foreign matter blocking the filter. | Regularly clean the filter screen located inside the brass inlet. |
| Screen keeps flashing and not working. | Pil gücü düşük. | Replace all 4 AA batteries with new ones. Restart the machine. |
Video 4: Common questions and answers regarding the RAINPOINT Sprinkler Timer, including issues with outlets, leaks, and screen flashing.
8. Özellikler
- Marka: YAĞMUR NOKTASI
- Modeli: Sky Blue 4 outlets (B0DLFJNJF8)
- Renk: Gök mavisi
- Ürün Ölçüleri: 7"D x 8"G x 4.5"Y
- Ürün Ağırlığı: 2 Pound
- Ayar Sayısı: 8 (referring to programmable cycles)
- Ekran Boyutu: 3.3 inç
- Su Basıncı: 116 PSI'ye kadar
- Güç Kaynağı: 4 adet AA pil (dahil değildir)
- Sulama Süresi: 1 dakika ila 3 saat 59 dakika
- Sulama Sıklığı: Her 1-12 saatte bir veya her 1-7 günde bir
9. Garanti ve Destek
RAINPOINT products are designed for durability and performance. For warranty information, technical support, or any inquiries regarding your sprinkler timer, please refer to the contact details provided in your product packaging or visit the official RAINPOINT webalan. Garanti talepleri için satın alma makbuzunuzu saklayın.
