Fein 18V AS 4-Speed Cordless Drill/Driver Set with Hammer Function

1. Giriş

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Fein 18V AS 4-Speed Cordless Drill/Driver Set with Hammer Function, model ASCM18-4 QMP AS. Please read these instructions thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

2. Güvenlik Bilgileri

Yangın, elektrik çarpması ve kişisel yaralanma riskini azaltmak için temel güvenlik önlemlerine her zaman uyun. Bu kılavuzu ileride başvurmak üzere saklayın.

• Çalışma Alanı Güvenliği: Çalışma alanını temiz ve iyi aydınlatılmış tutun. Elektrikli aletleri yanıcı sıvılar, gazlar veya toz gibi patlayıcı ortamlarda çalıştırmayın.
• Elektriksel Güvenlik: Topraklanmış veya topraklanmış yüzeylerle vücut temasından kaçının. Elektrikli aletleri yağmura veya ıslak koşullara maruz bırakmayın.
• Kişisel Güvenlik: Always wear eye protection, hearing protection, and suitable work clothing. Stay alert and use common sense when operating a power tool.
• Alet Kullanımı ve Bakımı: Elektrikli aleti zorlamayın. Uygulamanız için doğru elektrikli aleti kullanın. Herhangi bir ayarlama yapmadan, aksesuar değiştirmeden veya elektrikli aletleri saklamadan önce pil takımını elektrikli aletten çıkarın.
• Batarya Aleti Kullanımı ve Bakımı: Yalnızca üretici tarafından belirtilen şarj cihazıyla şarj edin. Elektrikli aletleri yalnızca özel olarak tasarlanmış pil takımlarıyla kullanın.

3. Ürün Bittiview ve Bileşenler

The Fein 18V AS 4-Speed Cordless Drill/Driver Set is designed for versatile drilling and driving tasks. It features a brushless PowerDrive motor, a 4-speed gearbox, and the QuickIN system for rapid accessory changes.

Dahil Bileşenler:

• 1 ASCM 18-4 QMP AS Cordless Drill/Driver (incl. auxiliary handle, belt clip, magnetic bit holder)
• 1 CORE 18 V 4.0 Ah AS Battery Pack
• 1 GAL 1880 CV AS Rapid Charger
• 1 QuickIN Accessory Set, 8 pieces
• 1 L-BOXX 136 Tool Case
• 1 i-BOXX 72
• 1 i-BOXX Rack

4. Kurulum

4.1. Pil doldurma

Before first use, fully charge the battery pack. Insert the battery pack into the GAL 1880 CV AS Rapid Charger. The charger's indicator light will show the charging status. Ensure the battery is securely seated.

4.2. Attaching QuickIN Accessories

The QuickIN system allows for tool-free accessory changes. To attach an accessory:

1. Güvenlik açısından matkabın kapatıldığından ve pilinin çıkarıldığından emin olun.
2. Align the QuickIN accessory with the drill's spindle.
3. Push the accessory firmly onto the spindle until it clicks into place.
4. To remove, pull back the QuickIN collar and detach the accessory.

4.3. Yardımcı Sapın Takılması

For enhanced control and safety, especially during high-torque applications or when using the hammer function, attach the auxiliary handle. Screw the handle into the designated threaded opening on the drill body and tighten securely.

5. Kullanım Talimatları

5.1. Açma/Kapama

To power on the drill, press the trigger switch. The tool will start. To power off, release the trigger switch.

5.2. Hız Ayarları

The drill features a 4-speed gearbox for optimal performance across different materials and applications. Use the speed selector switch located on top of the drill to choose the desired speed range:

• Hız 1: Lowest speed, highest torque for heavy-duty drilling and driving large fasteners.
• Hız 2: Medium-low speed for general drilling and driving.
• Hız 3: Medium-high speed for faster drilling in softer materials.
• Hız 4: Highest speed for small diameter drilling and light applications.

5.3. Tork Ayarları

The electronic torque setting offers 15+1 positions, allowing precise control over fastening applications to prevent overtightening or stripping screws. Rotate the torque collar to select the desired setting. The 'drill' symbol engages full torque for drilling operations.

5.4. Hammer Function

Engage the hammer function for drilling into masonry and concrete. This function provides an impact action in addition to rotation. Select the hammer drill mode on the collar for appropriate applications.

5.5. Kickback Monitoring

The integrated kickback monitoring system enhances user safety by detecting sudden tool rotation and automatically shutting down the motor to prevent injury. Maintain a firm grip on the tool and auxiliary handle during operation.

6. Bakım

Regular maintenance ensures the longevity and optimal performance of your Fein drill/driver.

• Temizlik: Havalandırma açıklıklarını temiz ve tozdan arındırılmış halde tutun. Yumuşak bir bez kullanın.amp cloth to clean the tool housing. Do not use harsh chemicals or abrasive cleaners.
• Pil Bakım: Store batteries in a cool, dry place away from direct sunlight. Do not expose batteries to extreme temperatures.
• Aksesuar Denetimi: Regularly inspect QuickIN accessories for wear or damage. Replace worn accessories to maintain performance and safety.
• Depolamak: Store the tool and accessories in the provided L-BOXX case in a secure, dry location, out of reach of children.

7. Sorun Giderme

If you encounter issues with your Fein drill/driver, refer to the following common problems and solutions:

8. Özellikler

9. Garanti ve Destek

For warranty information, please refer to the warranty card included with your product or visit the official Fein website. For technical support, spare parts, or service, please contact Fein customer service directly. Keep your purchase receipt as proof of purchase.

Fein Customer Service: Lütfen ziyaret edin www.fein.com/en_us/service/ İletişim bilgileri ve daha fazla yardım için.