1. Önemli Güvenlik Talimatları
Please read all instructions carefully before operating the Milex Nordic Ice Machine. Retain this manual for future reference.
- Cihazın, doğrudan güneş ışığından ve ısı kaynaklarından uzakta, sabit ve düz bir yüzeye yerleştirildiğinden emin olun.
- Cihazın güç kablosunu, fişini veya herhangi bir parçasını suya veya başka sıvılara batırmayın.
- Bu cihaz yalnızca ev kullanımı içindir. Açık havada kullanmayın.
- Cihaz kullanılırken çocukları denetleyin.
- Unplug the ice machine from the power outlet before cleaning or when not in use.
- Kablo veya fişi hasarlı olan veya cihaz arızalandıktan veya herhangi bir şekilde hasar gördükten sonra hiçbir cihazı çalıştırmayın.
- Allow the unit to stand upright for at least 2 hours before first use if it has been transported horizontally. This allows the refrigerant to settle.
- Su deposunda yalnızca içilebilir su kullanın.
- Havalandırma açıklıklarını kapatmayın. Ünitenin etrafında yeterli hava sirkülasyonu sağlayın.
2. Ürün Bittiview
Familiarize yourself with the components of your Milex Nordic Ice Machine.

Şekil 2.1: Ön view of the Milex Nordic Ice Machine, showcasing its sleek stainless steel housing and transparent lid.
Ana bileşenler:
- Kontrol Paneli: Located on the top, with indicator lights and buttons for operation.
- Şeffaf Kapak: İzin verir viewing of the ice-making process and ice level.
- Buz Sepeti: Buz toplamak ve saklamak için çıkarılabilir sepet.
- Su Tankı: Reservoir for water, located beneath the ice basket.
- Buz Kepçesi: Hijyenik buz toplama için dahildir.
- Boşaltma tapası: Suyun tahliyesi için alt kısımda yer almaktadır.
3. Kurulum
Follow these steps to set up your ice machine for the first time.
- Paketi aç: Carefully remove the ice machine from its packaging. Remove all packing materials, tape, and labels.
- Konum: Place the ice machine on a flat, stable, and heat-resistant surface. Ensure there is at least 15 cm (6 inches) of space around the unit for proper ventilation.
- Stand Upright: If the unit was transported horizontally, allow it to stand upright for at least 2 hours before plugging it in. This ensures the compressor oil settles correctly.
- Temiz: Before first use, clean the interior of the ice machine as described in the 'Maintenance and Cleaning' section.
- Gücü bağlayın: Güç kablosunu topraklı bir elektrik prizine takın.
4. Kullanım Talimatları
Operating your Milex Nordic Ice Machine is straightforward.

Şekil 4.1: Visual guide showing the three main steps: adding water, selecting ice size, and the ice production process.
4.1 Initial Ice Production
- Su ekle: Open the lid and fill the water tank with potable water up to the 'MAX' fill line. Do not overfill.
- Güç Açık: Press the 'POWER' button on the control panel. The power indicator light will illuminate.
- Buz Boyutunu Seçin: Press the 'SELECT' button to choose between small or large ice cubes. The corresponding indicator light will illuminate.
- Döngüyü Başlat: The machine will automatically begin the ice-making cycle. The first batch of ice may take approximately 8-15 minutes, depending on the selected size and ambient temperature.
- İzleme: The 'ICE FULL' indicator light will illuminate when the ice basket is full. The machine will pause operation. The 'ADD WATER' indicator light will illuminate when the water tank needs refilling.
- Buzları geri alın: Use the provided ice scoop to remove ice from the basket. Once ice is removed, the machine will resume operation if water is present.

Şekil 4.2: Ayrıntılı view of the control panel with indicator lights and freshly made bullet-shaped ice cubes.
4.2 Akıllı Uyarılar
- Su Göstergesi Ekle: When this light illuminates, the water level in the tank is low. Refill the water tank to continue ice production.
- Buz Dolu Göstergesi: When this light illuminates, the ice basket is full. Remove ice to allow the machine to resume operation.
5. Bakım ve Temizlik
Regular cleaning ensures optimal performance and extends the life of your ice machine.
5.1 Günlük Temizlik
- Her kullanımdan sonra cihazın fişini çekin.
- Drain any remaining water from the water tank by removing the drain plug at the bottom of the unit.
- Wipe the interior with a soft cloth and a mild detergent solution. Rinse thoroughly.
- Dry all surfaces completely before storing.
5.2 Aylık Temizlik
- Prepare a cleaning solution of water and white vinegar (1:1 ratio) or a commercial ice machine cleaner.
- Çözeltiyi su tankına dökün.
- Run a few ice-making cycles (discard the ice produced during this cleaning process).
- Drain the solution completely and rinse the water tank thoroughly with clean water several times.
- Dış cepheyi reklamla silinamp Kumaş.
Dikkat: Do not use abrasive cleaners or sharp objects to clean the ice machine, as this may damage the surfaces.
6. Sorun Giderme
Yaygın sorunlar ve çözümleri için bu bölüme bakın.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Ice machine not turning on | Güç kaynağı yok | Güç kablosunun çalışan bir prize güvenli bir şekilde takılı olup olmadığını kontrol edin. |
| 'SU EKLE' göstergesi yanıyor. | Su deposu boş veya seviyesi düşük. | Refill the water tank with potable water up to the 'MAX' line. |
| 'BUZ DOLU' göstergesi yanıyor. | Buz sepeti dolu | Remove ice from the basket. The machine will resume operation. |
| Buz üretimi yok | Insufficient water, high ambient temperature, or air blockage | Ensure water tank is full. Place the machine in a cooler environment. Check for proper ventilation. |
| Buz küpleri çok küçük veya topak topak. | Water temperature too high, or first cycle | Use colder water. The first few cycles may produce smaller ice. Ensure the machine has proper ventilation. |
7. Özellikler
Technical details for the Milex Nordic Ice Machine MIM003.
- Modeli: MIM003
- Güç: 220-240V, 50Hz
- Su Tankı Kapasitesi: 2.8 Litre
- Buz Üretim Kapasitesi: Up to 15kg per day
- Buz Depolama Kapasitesi: 1.5 kg'a kadar
- Ice Cycle Time: 8-10 minutes per cycle (9 ice bullets)
- Ice Options: Large or Small bullet-shaped ice
- Malzeme: Paslanmaz çelik gövde
- Dimensions (Box): 458mm x 290mm x 462mm
- Ürün Ağırlığı: 12 kilo
8. Garanti ve Müşteri Desteği
For warranty information, technical assistance, or customer support, please contact Milex customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Genellikle destek iletişim bilgilerini üreticinin resmi web sitesinde bulabilirsiniz. websitenizden veya perakendeciniz aracılığıyla.





