BORUIT RJ-1156 LED Rechargeable Headlamp Kullanıcı Kılavuzu

1. Pilin Takılması ve İlk Şarj

The BORUIT RJ-1156 headlamp uses two rechargeable Lithium-Ion batteries. Ensure batteries are correctly inserted before first use. It is recommended to fully charge the headlamp before its initial operation.

This image illustrates the DC charging port, the battery indicator light, and the compartment for the two rechargeable batteries. The battery indicator shows red when charging and green when fully charged.

1. Farın arka tarafında bulunan akü bölmesini bulun.amp birim.
2. Open the compartment and insert the two Lithium-Ion batteries, ensuring correct polarity (+/-).
3. Pil bölmesini sıkıca kapatın.
4. Connect the DC charging cable to the charging port on the battery pack.
5. Şarj kablosunun diğer ucunu uyumlu bir USB güç adaptörüne takın (adaptör pakete dahil değildir).
6. The battery indicator light will show red during charging and turn green when fully charged.

2. Kafa Bandını Takma

kafaamp Rahat kullanım için ayarlanabilir elastik bir kafa bandı ile birlikte gelir.

1. Elastik kafa bandını kafa bandındaki belirlenmiş yuvalardan geçirin.amp birim.
2. Adjust the straps to ensure a snug and comfortable fit on your head.

3. Attaching the Bike Clip (Optional)

For bicycle use, the headlamp unit can be detached and mounted using the provided bike clip.

This image displays the headlamp unit separated from the headband and connected to the bike clip, ready for bicycle mounting.

1. Locate the disassembly button at the bottom of the headlamp birim.
2. Press the button and push the headlamp unit forward to detach it from the headband bracket.
3. Secure the bike clip to your bicycle handlebars.
4. Slide the detached headlamp unit onto the bike clip until it clicks into place.

1. Güç Açma/Kapatma ve Mod Seçimi

This image highlights the waterproof and non-slip switch button for controlling the headlamp's functions.

kafaamp features a single switch button for controlling power and light modes.

1. Açmak için: Press the switch button once. The headlamp will activate in High White Light mode.
2. Modları Değiştirmek İçin: Press the switch button repeatedly to cycle through the modes: High White Light → Low White Light → Red Light.
3. Kapatmak: After cycling through all modes, press the button one more time, or press and hold the button for approximately 2 seconds in any mode.

This image demonstrates the three available light modes: High White Light, Low White Light, and Red Light, showing their appearance in a dark environment.

2. L'yi ayarlamaamp Baş Açısı

This image illustrates the 90-degree adjustable lamp head, allowing users to direct the light as needed.

kafaamp unit can be tilted up to 90 degrees to direct the light beam precisely where needed.

1. Başınızı hafifçe tutun.amp unit and tilt it up or down to your desired angle.
2. The mechanism is designed to hold the chosen angle securely.

3. Using the Red Light Function

This image demonstrates the red light function, highlighting its utility for preserving night vision and avoiding disturbance to animals, such as during beekeeping.

The red light mode is beneficial for specific situations:

• Night Vision Preservation: Red light does not easily stimulate the eyes, helping to maintain natural night vision.
• Yaban Hayatı Dostu: Less likely to startle animals, making it suitable for hunting, fishing, or wildlife observation.
• Böcekleri Çekme: Red light is less attractive to insects compared to white light.

1. Temizlik

• Kafanı silamp yumuşak, d bir gövdeye sahipamp Kumaş.
• Yüzey kaplamasına veya elektronik bileşenlere zarar verebileceğinden, aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Ensure the charging port cover is securely closed to maintain waterproof integrity.

2. Pil Bakımı ve Saklama

• Recharge the batteries regularly, even if the headlamp is not frequently used, to prolong battery life.
• Başlığı saklayınamp serin ve kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın.
• If storing for an extended period, charge the batteries to approximately 50% capacity.